2 piece drive shaft with TH350: yoke question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OldGyrene · 11-24-2017, 01:55 PM

Installed a TH350 trans into my '63 LWB Fleetside, and want to keep the 2 piece drive shaft. With the carrier bearing installed on the drive shaft, it looks to me like you would need a 2 piece (ubolt/strap style) yoke at the tranny end to be able to remove the drive shaft.

Am I looking at this right ? If so, the only 2 piece 27 spline yokes I see are 1310 series ujoints and the stock drive shaft is 1350 series at the front. I guess you could use a 1310/1350 combo ujoint.

Anyone done this ?

11-24-2017, 01:55 PM	#1
OldGyrene Registered User Join Date: Nov 2015 Location: Western Nebraska Posts: 43	2 piece drive shaft with TH350: yoke question Installed a TH350 trans into my '63 LWB Fleetside, and want to keep the 2 piece drive shaft. With the carrier bearing installed on the drive shaft, it looks to me like you would need a 2 piece (ubolt/strap style) yoke at the tranny end to be able to remove the drive shaft. Am I looking at this right ? If so, the only 2 piece 27 spline yokes I see are 1310 series ujoints and the stock drive shaft is 1350 series at the front. I guess you could use a 1310/1350 combo ujoint. Anyone done this ? __________________ Jake Old fart in Western NE Last edited by OldGyrene; 11-26-2017 at 11:24 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.