Converter recommended for c3500hd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcnally351 · 01-20-2019, 09:59 PM

I’m swapping my 01 c3500hd from the turd 6.5 td to a ls 6.0. I’m planning on using the stock 4l80 in the truck. Being an 01 it will bolt right up. I need to buy a high stall converter. I’m not sure if I should buy an ac Delco stock converter for a one ton truck or go to the aftermarket b&m,tci etc. the gvw is 15000 and I believe it runs a Dana 80 (need to check the ratio), 19.5” wheels.

This is a work truck that frequently carries a load.
Any recommendations?

01-20-2019, 09:59 PM	#1
mcnally351 Registered User Join Date: Jul 2014 Location: Boston MA Posts: 71	Converter recommended for c3500hd I’m swapping my 01 c3500hd from the turd 6.5 td to a ls 6.0. I’m planning on using the stock 4l80 in the truck. Being an 01 it will bolt right up. I need to buy a high stall converter. I’m not sure if I should buy an ac Delco stock converter for a one ton truck or go to the aftermarket b&m,tci etc. the gvw is 15000 and I believe it runs a Dana 80 (need to check the ratio), 19.5” wheels. This is a work truck that frequently carries a load. Any recommendations? __________________ 87 k5 silverado 4x4 350 38k stock 77 k5 Cheyenne 2wd 5.3 4l60e project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.