1971 K10 Stepside - Getting a Roller Roadworthy

[pjmoreland]

Cleaned up and painted the replacement hub. There is a slight difference between the new and old. The inner seal depth is not as deep on the replacement. The seals I removed from my originals were thin (.25") even though the hubs appear to be made for the .31" wide seals everyone sells. I have been looking all over the place, and I can't find any .25" wide seals. The old thin seal I've got says, "Made in Singapore" and "UF 0215E" on it, but searching for that goes nowhere. The wider seals will probably work just fine.