converting old 67 hand parking brake to foot parking brake. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neonlarry · 08-03-2005, 09:56 PM

Check out Wes's panel project:
http://www.classicheartbeat.com/panel_5.htm

Bob Moore · 08-03-2005, 10:06 PM

The foot brake mechanism is about 1/2 or 3/8 longer(deeper) than the 67/68 cab allows. You can either section the foot mechanism or do like Wes did with his panel.

Good luck - Bob

08-03-2005, 09:56 PM	#1
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Check out Wes's panel project: http://www.classicheartbeat.com/panel_5.htm __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

08-03-2005, 10:06 PM	#2
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	The foot brake mechanism is about 1/2 or 3/8 longer(deeper) than the 67/68 cab allows. You can either section the foot mechanism or do like Wes did with his panel. Good luck - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.