20 inch wheels with 5/7 drop

[SCOTI]

Originally Posted by 1984 swb chevy

I ordered my wheels and tires today. I got 20x 8.5 with 5.25 backspace in the front and 20x10 with 5.00 backspace. I also got 295/40 /20 tires for the front and they said I could run 255/40/20 in the front. I wanted 245/40/20 but they do not have that size. Will I have a problem with the 255/40/20. My truck is an 84 C-10 with 5/7. The tires I ordered are Toyo Proxy.

255/40-20's up front on 8.5's w/5.25"BS will fit. The main concern will be rubbing the top of the inner wheel well on bumps/dips w/the 5" drop. Mine does on larger bumps in the road or smaller ones @ greater speeds but my front wheel/tire combo is < 27" tall; the 255/40-20 is 28" tall.

The 295/40-20's on 10" w/5.00"BS won't be a problem @ 7" drop.

[1984 swb chevy]

Can anyone tell me what size I can run up front so I dont have an issue with the inner fender. Thanks

[Srubydo1986]

heres some 20s for you its on my moms truck. she didnt lower casue she loves using her truck, that and it a 4 wheel drive, but still a very nice truck

[Srubydo1986]

Originally Posted by 1984 swb chevy

Can anyone tell me what size I can run up front so I dont have an issue with the inner fender. Thanks

highs ive hear witha 2wd with out lowering is 31s.

[AirMale]

Originally Posted by 1984 swb chevy

Can anyone tell me what size I can run up front so I dont have an issue with the inner fender. Thanks

The issue we all have when running large wheel and tire combos up front is not the fender or lip, it's the inside of the wheel well. It will only rub when you hit a nice dip or bump but don't worry you're not alone.

[CLASSIC87']

Originally Posted by AirMale

The issue we all have when running large wheel and tire combos up front is not the fender or lip, it's the inside of the wheel well. It will only rub when you hit a nice dip or bump but don't worry you're not alone.

DITTO... and I will add this: remove your jack, bolts, etc. from the drivers side wheel well. At least install C/S or small head bolts (if you dont remove the jack).

[1984 swb chevy]

Thanks again for all the info. I am going with the 255/40/20's up front. I need the ground clearance for my lower control arms.I will take the jack out so I dont have to worry about that . I guess I will take my chances with the inner fender clearance. Thanks again.

[slugish]

have 5.5 front drop with 8 in. tt 2,s 255x17x50 . Only problem is lower control arm rub when making sharp turn ( NEED TO GRIND OFF A LITTLE WHERE THE BACK OF THE RIM RUBS & SHOULD BE OK ) No problem with upper fender rub , still have bump stops on . if bump stops were removed im sure tire would hit fender well on bumps & dips . Hope this helps . You also can cut a little off bump stop & be ok.