|
|
|
|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
04-30-2009, 08:28 PM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Lowering Block Kit- Will this work
Measure the pads and see. I think it's the right one.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71  Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
04-30-2009, 08:36 PM
|
#2 |
|
Too many toys,not enough money
Join Date: May 2008
Location: Bozeman,MT
Posts: 237
|
Re: Lowering Block Kit- Will this work
I don't think those are going to work. It say's for leaf springs, it will have locating pins that won't sit right with the axle mounts. The blocks you need are flat bar stock with 2 holes drilled in them. See my example below. These I made to fit mine. Also check in the FAQ's I know there is a post in there on how to build them. Cpp, EEC, Perhaps Bell Tech may sell the right kits.
Last edited by MT71c-10; 04-30-2009 at 08:39 PM. |
|
|
|
|
04-30-2009, 08:41 PM
|
#3 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Lowering Block Kit- Will this work
My bad. I started typing before reading it good, sorry. They want work
MT71c-10, Thanks for showing me the right answer!.  
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
04-30-2009, 08:50 PM
|
#4 |
|
Too many toys,not enough money
Join Date: May 2008
Location: Bozeman,MT
Posts: 237
|
Re: Lowering Block Kit- Will this work
No problem, Just trying to help!
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
MT71c-10 
Hybrid Mode
