VA cab patches f/s

[billsbowtie]

i have a cab i am cutting up for patches if you see a piece you need i will try to cut it and price it . it has a good radio patch $45.00 shipped cut at glove box & dash bezel. it has some good windshied patches and other good patches.

[billsbowtie]

[billsbowtie]

[billsbowtie]

[indianpride77]

how good is the floor area?

[68laydout]

How much for the roof skin shipped to 75024?

[billsbowtie]

floor and roof has some good places . can you all send me a pic of what you need?

[indianpride77]

well i can't really take a pic since i'm at work but i kind of used your pic to show you the area i am needing for both sides. basicly a couple inches in front of the seat mounting area all the way to the rear wall

[pound41]

Bill is the cowl good. If so I will wants some patches where they rust on both sides near the corners on the firewall side
thanks

[billsbowtie]

indianpride77 pass side looks ok i will have to check drivers side. i say $50.00 a side plus about $30.00 a side for shipping to wa.
pound41 i will try to check them out sunday.

[billsbowtie]

indianpride i may have to send them grayhound and i have to drive 1 hour 15 mins one way to get there.

[billsbowtie]

68laydout is this the piece you need ?

[indianpride77]

ok i'm going to have to pass for now and hope they are still available down the road. i really hate unexpected things happening. sry about that Jimmy

[billsbowtie]

drivers side floor not as nice as pass side but pertty soild.
thats ok jimmy we all have things come up.

[billsbowtie]

drivers side firewall.

[billsbowtie]

pass side firewall.

[Mike J]

Bill, I may be coming up to get the windshield and bumper this Saturday (27th) if you'll be home--- My cab is rusted bad at the very bottom in the back (lower lip, in between cab corners)- how is this part on this cab? and how much would you want for it? I'll pick it up then as well, if it's good, and the price is good - let me know, thanks!

[brownge]

Bill,

I need the entire rear window lower metal - I have rust in both corners extending out about 1 foot from each side underneath where the windshield rubber covers. Is that part in good shape?

Thanks,
Greg

[billsbowtie]

mike this sat is ok to pick up parts. is the ligh blue high lighted piece in pic. what you need?
brownge is the red high lighted piece you need?

[Mike J]

I cant see the pics here at work, but I'll check it out at home tonight, Thanks! I'll give you a call and get directions sometime before Saturday.

[brownge]

Yes, but I only need the part under the window rubber - if it could be cut about 2 inches under the where the gasket sits and up about 3 inches in each corner that would be perfect. It could be cut in half to make it easier to ship.

Thanks,
Greg

[brownge]

I marked up one of the other pics to show the part I need.

[billsbowtie]

ok mike
brownge hows $35.00 shipped to you sound for that piece?

[Mike J]

Bill, yeah thats the spot- BUT the outside is where it's rusted through, the exterior panel between the cab corners. Dont know if you can seperate that part, or if you have to cut it out with the inner panel (really I could use both if you had to cut it that way) I have new cab corners, but it's all rusted out behind them (inside the cab) - Thanks brother!

[billsbowtie]

greg i have your pieces cut boxed up ready to ship. i will pm you my paypal in a few mins.