Aluminum differetial covers ? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alex Hayley · 10-19-2010, 09:37 AM

ECE makes a bent super track bar. I had the same problem as I was putting mine together. ECE took the straight bar back and sent a bent one.

john@thepier · 10-20-2010, 08:27 PM

ALEX HAYLEY please post up a picture of that bent ece bar if you would.

71STPSDE · 10-24-2010, 05:40 PM

I went to ECE's website and don't see anything there. Please take some pics and what was the price for the bent one?

Alex Hayley · 10-24-2010, 07:33 PM

Hey guys...sorry about taking so long to get a picture up. Here is the picture of the bar.

Call ECE and ask for Stan. He is the guy that did the fitting for the bar when I got it a few years ago. If I remember correctly the bar was about $25 more than a straight bar. I don't remember what I paid.

If you need pictures from a different angle let me know.

john@thepier · 10-24-2010, 09:22 PM

Thanks man, I will give them a call and see if swapping is still available.

*stich626* · 10-25-2010, 09:40 AM

can't ya just move the brackets back some..
I'd think a small piece of 1/4 angle plate or ? on the rearend side and move the frame bracket back would do it?

**Hart_Rod** · 10-25-2010, 10:05 AM

Quote:

Originally Posted by stich626

can't ya just move the brackets back some..
I'd think a small piece of 1/4 angle plate or ? on the rearend side and move the frame bracket back would do it?

For the ECE bracket, I just got a longer bolt and moved the bar to the rear side of the bracket. I also installed a metal sleeve where the hym joint was originally located, to prevent the bracket from compressing/collapsing. I can post some pictures later. This is not going to be my final solution, but it will allow me to get my truck back on the road until I have time to design a better bracket.

john@thepier · 10-25-2010, 07:43 PM

I did infact talk to ECE today they do offer a bent bar for this type of issue. They will accept my stock super trac bar back in exchange for there bent bar for $30. If the bent bar they supply me with still dose not clear they said they would fab me one up that will. Thanks again Alex Haley for letting us know. John

dmwphoto · 10-25-2010, 07:53 PM

Quote:

Originally Posted by john@thepier

I did infact talk to ECE today they do offer a bent bar for this type of issue. They will accept my stock super trac bar back in exchange for there bent bar for $30. If the bent bar they supply me with still dose not clear they said they would fab me one up that will. Thanks again Alex Haley for letting us know. John

I really like those guys...

10-19-2010, 09:37 AM	#26
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Re: Aluminum differetial covers ? ECE makes a bent super track bar. I had the same problem as I was putting mine together. ECE took the straight bar back and sent a bent one.

10-20-2010, 08:27 PM	#27
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: Aluminum differetial covers ? ALEX HAYLEY please post up a picture of that bent ece bar if you would.

10-24-2010, 05:40 PM	#28
71STPSDE Registered User Join Date: Jun 2006 Location: San Antonio, TX Posts: 296	Re: Aluminum differetial covers ? I went to ECE's website and don't see anything there. Please take some pics and what was the price for the bent one? __________________ 71 Chevy Stepside 377/350

10-24-2010, 07:33 PM	#29
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Re: Aluminum differetial covers ? Hey guys...sorry about taking so long to get a picture up. Here is the picture of the bar. Call ECE and ask for Stan. He is the guy that did the fitting for the bar when I got it a few years ago. If I remember correctly the bar was about $25 more than a straight bar. I don't remember what I paid. If you need pictures from a different angle let me know. Last edited by Alex Hayley; 10-24-2010 at 07:35 PM.

10-24-2010, 09:22 PM	#30
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: Aluminum differetial covers ? Thanks man, I will give them a call and see if swapping is still available.

10-25-2010, 09:40 AM	#31
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: Aluminum differetial covers ? can't ya just move the brackets back some.. I'd think a small piece of 1/4 angle plate or ? on the rearend side and move the frame bracket back would do it?

10-25-2010, 07:43 PM	#33
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: Aluminum differetial covers ? I did infact talk to ECE today they do offer a bent bar for this type of issue. They will accept my stock super trac bar back in exchange for there bent bar for $30. If the bent bar they supply me with still dose not clear they said they would fab me one up that will. Thanks again Alex Haley for letting us know. John

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.