|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-01-2014, 12:26 PM
|
#6 |
|
Registered User
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,787
|
Re: 454/TH400 install questions
If you remove/drill out the bottom rivits you might be able to get a longer drill bit and drill out the upper by going through the lower holes. I put a BBC in one of my 65's. I used tubular engine mounts that I got from Truck and car shop but I also cut the firewall for valve cover clearance so I could use the rear holes. I had to trim the upper frame rails for the new perches but you have to do that with the later model ones also. My thread is in my sig.
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode