|
07-30-2014, 10:46 AM
|
#1 |
|
Registered User
 
Join Date: Oct 2012
Location: Geneva, Ohio
Posts: 201
|
tranny pan
Is it okay to put a drain plug in tranny pan?
Any recommended type of bolt for this? Would reinforce pan for tapping threads. Thanks |
|
|
|
07-30-2014, 10:49 AM
|
#2 |
|
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,269
|
Re: tranny pan
B&M makes a great drain plug kit and I don't think it is too expensive. It also has a magnetic tip to catch the metal to pull it out of the oil. Jim
|
|
|
|
|
07-30-2014, 01:05 PM
|
#3 |
|
Registered User
Join Date: Feb 2014
Location: Palmerston North New Zealand
Posts: 58
|
Re: tranny pan
With the pan off you could also get a oxygen sensor threaded fitting the bit the sensor screws into most exhaust will have these very cheap drill a hole to suit and weld in fitting iv used this method for repairing striped threads on engine sump plug holes just make sure you use a copper or nylon washer on the plug
|
|
|
|
|
07-30-2014, 01:24 PM
|
#4 |
|
Registered User
Join Date: May 2012
Location: Faith,NC
Posts: 1,626
|
Re: tranny pan
My aftermarket pan for my turbo 400 came with one in it.
|
|
|
|
|
07-30-2014, 04:05 PM
|
#5 |
|
Registered User
Join Date: Mar 2014
Location: Simi, CA
Posts: 495
|
Re: tranny pan
I just installed one on my 700R4. I picked it up from Oriley Auto for under 10 bucks. Drop the pan, drill a hole in it, screw the new drain plug assembly together, done.No welding required. B&M and Dorman part looks identicle. Dorman part #326-65128. You should be able to pick on up at any auto parts store.
|
|
|
|
|
07-31-2014, 08:21 AM
|
#6 |
|
Registered User
Join Date: Oct 2012
Location: Geneva, Ohio
Posts: 201
|
Re: tranny pan
Great information. Very helpful.
Thanks guy's. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
