Changing an Ignition Lock Cylinder

[LockDoc]

Originally Posted by HerrOtto

Will this same method work for a 1961 Chevy C10? There is no accessory position.
Thank you

If I remember correctly the '61 has a separate start button does it not. If so, you would turn the key to the right to the "on" position then insert the straightened wire or paper clip to depress the retaining pin. Then turn the key farther to the right to remove the cylinder. This is the opposite direction from the '67-'72's. I would unhook the battery before doing this.

Any problems let us know.

LockDoc