Complete 86 GMC Suburban F/S Trade or Parting Out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Old Chevy Lover · 03-23-2003, 10:02 PM

1986 GMC Barn Door Suburban. Either gonna sell it whole, trade, or part it out. I don't know yet. Let me know if your interested. Would like to get $1300 for it as a whole, or $800 no motor/tranny. Has a 350/th350. Interior is in good shape. top of dash is cracked, and seat are decent. One will need a cover, or redone. Usual rust (rockers, bottem of doors starting, behind rear wheels). Was wrecked and redone in front end. Hood and front fenders have surface rust on them, but no holes at all. Front windshield is cracked, but rest of glass is in good shape. Was told that the 350 had a blown head gasket when I got it, but it seems to run fine. It does not have water in the oil at all. I have driven about 100 mile or so and it seems to be ok. I did notice a very light skim of oil in the radiator after driving it, but it was not mirky at all. Could just be an intake gasket, too. I am going to tear it apart one of these days, but just haven't done it yet.

Old Chevy Lover · 03-23-2003, 10:03 PM

2

Old Chevy Lover · 03-23-2003, 10:05 PM

3

BigBlockBurris · 03-24-2003, 12:39 AM

I'll but the door panles if they are in good shape.

BBB

Old Chevy Lover · 03-24-2003, 10:04 AM

I will keep you in mind if I start parting it out

benscool1 · 03-26-2003, 11:04 PM

I might be interested, send me an email at benscool1@hotmail.com

Old Chevy Lover · 03-29-2003, 03:34 PM

ttt

fast71 · 03-30-2003, 11:19 AM

I'm intrested in the grill and the inst. panel and bezel. more pics of the bezel and guage pack,if parting out

Old Chevy Lover · 03-31-2003, 10:16 PM

Would like to sell it as a whole, but no takers so far... How about if I drop it down to $1300.....???

Old Chevy Lover · 06-01-2003, 10:21 PM

ttt

cochino12 · 06-01-2003, 11:06 PM

if BigBlockBurris doesn't take the panels, I will take the chrome trim around the door handle.

junkyardpartseeker · 06-02-2003, 02:36 AM

If you start parting it out, let me know. I would be interested in the tinted glass of the 2 rear doors and the 2 quarter panel tinted windows also if they are factory tint and not film tinted.
Tommy

littlebubba · 06-02-2003, 09:57 AM

If you end up parting it out, I'll take the rear bumper, filler panel, and mounting brackets. Just as long as the bumper is as straight as it looks in pics.

Old Chevy Lover · 06-02-2003, 10:10 AM

Ok. I'm going to give it 7 days. If I don't sell it, I will start parting it out. I will contact people in the order of posts here, so if there's something you need, or think you need, go ahead and post here. There are A LOT of good parts on this thing. If someone wanted it as just a roller (no motor, tranny), I would sell it for $800.

gldevall · 06-03-2003, 12:02 PM

What type of rear end does it have? Posi?? How much for it?

ElGracho · 06-03-2003, 05:59 PM

I'd like to have the front seats with tracks and console.

Old Chevy Lover · 06-09-2003, 04:29 PM

TTT - about ready to start parting out!! going once... going twice... $1300 complete / $800 no motor tranny worth way more than that in parts...

bstack · 06-09-2003, 10:46 PM

2nd in line for front seats and console!!

Old Chevy Lover · 06-11-2003, 02:19 PM

Well.. I am waiting on a guy to decide if he wants to take this in as partial payment on a trade. Will post the outcome.

CT-Truckster · 06-14-2003, 10:26 PM

What about the steering column, is it tilt? with cruise, and wiper and cruise switch and all in good shape?

gldevall · 06-16-2003, 09:21 PM

What's the deal? Is it going to be parted out? I may be interested in the trim on the dash for the air vents.

swissarmychainsaw · 05-07-2015, 04:16 PM

Hey Mods, how come these ads never expire?
If there is no search engine, It makes little sense to have ads hang around for 13 years. Literally 13 years! :-)
Expire it!

03-23-2003, 10:02 PM	#1
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	Complete 86 GMC Suburban F/S, $1300 complete, or $800 no motor,tranny 1986 GMC Barn Door Suburban. Either gonna sell it whole, trade, or part it out. I don't know yet. Let me know if your interested. Would like to get $1300 for it as a whole, or $800 no motor/tranny. Has a 350/th350. Interior is in good shape. top of dash is cracked, and seat are decent. One will need a cover, or redone. Usual rust (rockers, bottem of doors starting, behind rear wheels). Was wrecked and redone in front end. Hood and front fenders have surface rust on them, but no holes at all. Front windshield is cracked, but rest of glass is in good shape. Was told that the 350 had a blown head gasket when I got it, but it seems to run fine. It does not have water in the oil at all. I have driven about 100 mile or so and it seems to be ok. I did notice a very light skim of oil in the radiator after driving it, but it was not mirky at all. Could just be an intake gasket, too. I am going to tear it apart one of these days, but just haven't done it yet. Attached Images __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto Last edited by Old Chevy Lover; 06-02-2003 at 10:11 AM.

03-23-2003, 10:03 PM	#2
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	2 Attached Images __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

03-23-2003, 10:05 PM	#3
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	3 Attached Images __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

03-24-2003, 10:04 AM	#5
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	I will keep you in mind if I start parting it out __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

03-26-2003, 11:04 PM	#6
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	I might be interested, send me an email at benscool1@hotmail.com __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-24-2003, 12:39 AM	#4
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	I'll but the door panles if they are in good shape. BBB

03-29-2003, 03:34 PM	#7
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	ttt __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

03-30-2003, 11:19 AM	#8
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	I'm intrested in the grill and the inst. panel and bezel. more pics of the bezel and guage pack,if parting out __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100

03-31-2003, 10:16 PM	#9
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	Would like to sell it as a whole, but no takers so far... How about if I drop it down to $1300.....??? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

06-01-2003, 10:21 PM	#10
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	ttt __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

06-01-2003, 11:06 PM	#11
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	if BigBlockBurris doesn't take the panels, I will take the chrome trim around the door handle. __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

06-02-2003, 02:36 AM	#12
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	suburban If you start parting it out, let me know. I would be interested in the tinted glass of the 2 rear doors and the 2 quarter panel tinted windows also if they are factory tint and not film tinted. Tommy __________________ junkyardpartseeker@sbcglobal.net

06-02-2003, 09:57 AM	#13
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 321	Back bumper If you end up parting it out, I'll take the rear bumper, filler panel, and mounting brackets. Just as long as the bumper is as straight as it looks in pics.

06-02-2003, 10:10 AM	#14
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	Ok. I'm going to give it 7 days. If I don't sell it, I will start parting it out. I will contact people in the order of posts here, so if there's something you need, or think you need, go ahead and post here. There are A LOT of good parts on this thing. If someone wanted it as just a roller (no motor, tranny), I would sell it for $800. __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

06-03-2003, 12:02 PM	#15
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	What type of rear end does it have? Posi?? How much for it? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels



Register or Log In To remove these advertisements.

06-03-2003, 05:59 PM	#16
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I'd like to have the front seats with tracks and console. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

06-09-2003, 04:29 PM	#17
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	TTT - about ready to start parting out!! going once... going twice... $1300 complete / $800 no motor tranny worth way more than that in parts... __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

06-09-2003, 10:46 PM	#18
bstack Registered User Join Date: Dec 2000 Location: cambridge,ohio Posts: 135	2nd in line for front seats and console!! __________________ 70-Olds 442 66-Impala 4-dr. 67-K-10 87 Chev. 1/2 Ton 4x4 Swb

06-11-2003, 02:19 PM	#19
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	Well.. I am waiting on a guy to decide if he wants to take this in as partial payment on a trade. Will post the outcome. __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

06-14-2003, 10:26 PM	#20
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	What about the steering column, is it tilt? with cruise, and wiper and cruise switch and all in good shape?

06-16-2003, 09:21 PM	#21
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	What's the deal? Is it going to be parted out? I may be interested in the trim on the dash for the air vents. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

05-07-2015, 04:16 PM	#22
swissarmychainsaw Registered User Join Date: Jun 2009 Location: san francisco, ca (east bay) Posts: 674	Re: Complete 86 GMC Suburban F/S Trade or Parting Out Hey Mods, how come these ads never expire? If there is no search engine, It makes little sense to have ads hang around for 13 years. Literally 13 years! :-) Expire it!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.