|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-28-2017, 10:31 PM
|
#1 |
|
Registered User
Join Date: Nov 2016
Location: lowell ma
Posts: 750
|
Re: 350 crate engine intake and carb possible for $3,000?
g.m. vortec 350 crate 2060. jegs
intake 230 jegs one piece rear seal flexplate 60.00 local parts store. carb 250.00 small electric fuel pump 100.00 tops.. 30.00 for the melonized distributor gear to put on your distributor new water pump 40.00 225 hp roller cammed 350 that doesn't need special oil.. doesn't need the 20 minute hail mary break in.., and doesn't leak oil . Better heads, and better power under the curve (under the power peak) better fuel economy.. than the basic 350. with flat tappet cam and 76 cc heads and 8.0 compression (listed as 8.4 but real world comes in at closer to 8.0) vortec is 9.4 |
|
|
|
02-28-2017, 10:55 PM
|
#2 | |
|
Registered User
 
Join Date: Jan 2003
Location: Safford,AZ
Posts: 3,626
|
Re: 350 crate engine intake and carb possible for $3,000?
Quote:
http://www.ebay.com/itm/391474215998
__________________
1969  307, t3501950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT |
|
|
|
|
|
02-28-2017, 11:32 PM
|
#3 | |
|
Registered User
Join Date: Nov 2016
Location: lowell ma
Posts: 750
|
Re: 350 crate engine intake and carb possible for $3,000?
Quote:
143.00 iirc mine was just 300-350 bones for the edelbrook performer with both bolt patterns.. for the holley and q-jet.. |
|
|
|
|
|
03-01-2017, 11:24 AM
|
#4 |
|
Registered User
Join Date: Jul 2007
Location: Fall River California
Posts: 2,027
|
Thanks all, I'll go over these with my daughter. Looks like some good options.
Posted via Mobile Device |
|
|
|
|
03-01-2017, 11:34 AM
|
#5 |
|
Registered User
Join Date: Jan 2003
Location: Safford,AZ
Posts: 3,626
|
Re: 350 crate engine intake and carb possible for $3,000?
This is exactly what i'm doing for our 1969 GMC-
Crate Vortec 350- fitech FI and for my 1978 c10- Vortec 350, cam from 1995 f-body- carb or TPI
__________________
1969 307, t3501950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT |
|
|
|
|
03-01-2017, 11:50 AM
|
#6 |
|
Senior Member
Join Date: Jul 2015
Location: Fairfax, Missouri
Posts: 1,049
|
Re: 350 crate engine intake and carb possible for $3,000?
I'm thinking of buying a new engine also. Will the factory exhaust manifolds work with the vortec engine?
|
|
|
|
|
03-01-2017, 12:42 PM
|
#7 |
|
Registered User
Join Date: May 2013
Location: WEST PALM FLORIDA
Posts: 1,174
|
Re: 350 crate engine intake and carb possible for $3,000?
I would do this
http://www.jegs.com/i/Chevrolet-Perf...30283/10002/-1 plus , intake manifold , 600 edelbrock carb , and you will need to get an electric fuel pump , much better engine that the "henchos"
__________________
68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs 67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive 58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white 69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
