The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > Heavy Haulers

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-05-2017, 05:17 PM   #1
68-Chevy-C50
Registered User
 
Join Date: Aug 2017
Location: Minnesota
Posts: 2
New to the forums, new to the big truck world. Brakes?

I recently picked up a 68 Chevy C50, I have got it running and I am able to drive it around the farm. The problem I am running into is with the brakes. I am able to stop the truck after multiple pumps of the brakes, I attempted to flush and bleed the lines, however, I am only getting a small drip to come out. Any suggestions on how to either fix my brakes in a different way, or solve my bleeding problem? Thanks!
68-Chevy-C50 is offline   Reply With Quote
Old 08-05-2017, 11:09 PM   #2
nonstop
Registered User
 
Join Date: Dec 2014
Location: Northern California
Posts: 422
Re: New to the forums, new to the big truck world. Brakes?

Sounds like you might have a bad master cylinder or need to do a thorough bleeding including the master cylinder. Does it have power brakes?
nonstop is offline   Reply With Quote
Old 08-05-2017, 11:17 PM   #3
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: New to the forums, new to the big truck world. Brakes?

there should be 2 bleader screws on the master/booster under the cab .

also 1 on the firewall booster possible .

and also check and see if you are holding vac on the booster under the cab . if not this might be a bad check valve .

but with out seeing what you have some of this info might be wrong . as there was a few systems .

and also if the brake shoes are out of adjsutment or paper thin material then they need adjusted or replaced .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 08-06-2017, 06:23 PM   #4
68-Chevy-C50
Registered User
 
Join Date: Aug 2017
Location: Minnesota
Posts: 2
Re: New to the forums, new to the big truck world. Brakes?

Thank you for the advice. I tried again to bleed the line. The truck does have power brakes and it has a single chamber master cylinder. I think the booster is good considering depressing the brakes while the truck is running is significantly easier. However, the more I use the brakes while its running, it feels like I am losing all brake pressure.

Another thing I found is that the bleeding valves only trickle on the rear wheels, unlike the front two wheels which bleed like a normal vehicle would.

The last question I have is, how common is it for the master cylinder to go out? There is clearly wet spots that build up where the master cylinder meets the booster. Is this a sign of a bad master cylinder? If so, how do I go about removing it?
68-Chevy-C50 is offline   Reply With Quote
Old 08-06-2017, 10:17 PM   #5
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: New to the forums, new to the big truck world. Brakes?

if you cant hold vac in the booster under the cab then you wont get any assist help . then the more you drive it the less brakes you get .

like i said check to see if it holds vac .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com