The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-27-2017, 10:37 PM   #26
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: Vin codes ?????????

Tall blocks were a 366cid and 427cid..
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 08-27-2017, 10:55 PM   #27
grunt67
Registered User
 
Join Date: Aug 2017
Location: Auburn, WA.
Posts: 21
Re: Vin codes ?????????

Thank you for the input. Helps to learn,
Grunt
grunt67 is offline   Reply With Quote
Old 08-29-2017, 12:03 AM   #28
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,676
Re: Vin codes ?????????

I'd recommend backing the timing off until you find the source of the ping. You're going to trash pistons and rod bearings, otherwise. My truck is set to the factory spec initial timing, and only pings a little if I'm pulling a hill with my 26 foot travel trailer in the heat (and gets up to about 230º). I have an HEI; maybe the MSD ignition is doing some early advance that doesn't show up?
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 08-29-2017, 12:41 AM   #29
grunt67
Registered User
 
Join Date: Aug 2017
Location: Auburn, WA.
Posts: 21
Re: Vin codes ?????????

Thank you, Ill try that.
Grunt
grunt67 is offline   Reply With Quote
Old 08-29-2017, 09:37 AM   #30
clay68c10
Senior Member
 
clay68c10's Avatar
 
Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,988
Re: Vin codes ?????????

X2 on the timing adjustment. Why spend money on something that's not broken. Drop your initial down to 8-10 and see how it does.

How's the plugs look? Running lean under load will also make it ping, especially if you have high compression. What pistons are in it? Do a compression test and post up the numbers.

Do some trouble shooting before you just throw parts at it. These old carbed engines are pretty simple. You may be a jet change away from perfection.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO
http://67-72chevytrucks.com/vboard/s...d.php?t=788602
93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday...
05 Jeep Wrangler Unlimited. 3” lift & 6-speed
02 E320 the insurance total “free car”
13 Tahoe LTZ
clay68c10 is offline   Reply With Quote
Old 09-01-2017, 04:24 PM   #31
grunt67
Registered User
 
Join Date: Aug 2017
Location: Auburn, WA.
Posts: 21
Re: Vin codes ?????????

Quote:
Originally Posted by grunt67 View Post
Yes, number 1 up to top, balancer mark on zero ?
This all started after we installed a Tac to the white wire on the MSD box, as it showed in the wire diagram , also installed Volt meter , seems like from that day on is when all the pinging started, but I can not see that causing all the darn pinging when motor get warmed up to 190 ??????????
I found the pinging problem !!!!!!!!! Initial timing was set at 14 degrees, but at 3000 rpm it shot up to 50 degrees in a heart beat, iput in the silver heavy springs, reset timing at 12 degrees, that got rid of 95 % of that pinging ,truck runs great, I bought a new dist and having a engine builder set up the new Dist. to what he thinks it should be for this engine, also put a new coil on it.
So glad to finaly get some where with this engine.
I WANT TO THANK ALL YOU GUYS FOR YOUR GREAT INPUT.
The old Grunt in WA. State.
"" WELL THAT DID NOT LAST LONG, AS SOON AS THE MOTOR GOT WARMED UP ., PING, PING PING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Last edited by grunt67; 09-01-2017 at 10:08 PM.
grunt67 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com