Power Steering!!?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spspspspoon · 03-05-2020, 08:15 PM

SBC power steering pump
with stock steel mount?
Picked up a new power steering pump( 20-7920F) as well as bracket
pump does not have lower rear mounting stud!??
And all the mounts I've seen (exc my bent to stock steal one) seem to require lower rear mounting stud??

I need either a mount that works With Out Rear Lower Mount Stud
Or the same type I have maybe smaller or? and has a Rear Mount Stud

mounted lower driver position
LWP

**The Rocknrod** · 03-05-2020, 08:28 PM

What was the middle thing again?

**PGSigns** · 03-05-2020, 08:53 PM

You can put the new guts in your old can. Careful on the colorful language, it is a family oriented site.
Jimmy

Killer Bee · 03-06-2020, 01:37 AM

if yer that excited over the wrong parts, may want to consider a new hobby..

as for the correct bracket/pump configuration. your application information may lead a board member to a solution for you..

good luck!

spspspspoon · 03-06-2020, 03:04 AM

Not at all Sorry

just slowly replacing stuff on my engine finding out that the parts were just beating up and more used than previously thought

I've been wrenching for 30+ yrs
we all have those F it moments

I ended up taking apart my old pump and noticing that the pump itself has the threads in it to put that mounting bolt so I'm going to have to just drill into the case and put the mounting stud there

But again the bracket that I picked up fits too snugly to the pump sides and not enough room to even adjust it if mounted correctly
seems that my pump is a little taller than the ones I've seen in all of the pictures

metric?
my pump to box hose seems to be both flanged And O ring?

kens65fb · 03-06-2020, 08:15 AM

Quote:

Originally Posted by spspspspoon

Not at all Sorry

just slowly replacing stuff on my engine finding out that the parts were just beating up and more used than previously thought

I've been wrenching for 30+ yrs
we all have those F it moments

I ended up taking apart my old pump and noticing that the pump itself has the threads in it to put that mounting bolt so I'm going to have to just drill into the case and put the mounting stud there

But again the bracket that I picked up fits too snugly to the pump sides and not enough room to even adjust it if mounted correctly
seems that my pump is a little taller than the ones I've seen in all of the pictures

metric?
my pump to box hose seems to be both flanged And O ring?

Apparently you are working with mismatched parts.
Save yourself AND us, a lot of grief, just get the correct pump, and correct bracket, and move on.

rpmerf · 03-06-2020, 10:56 AM

Some thoughts.
Unless you've owned the truck since new, you don't know what has been changed over the years. Really inspect old parts before buying new parts. Don't be surprised when things don't fit.

I usually go on Rock Auto and look closely at pictures, and options before buying anything. Look for parts for later generations also, they might had been swapped in years ago.

You mentioned metric. I think power steering stuff switched to metric sizes about 78ish. Might look for the hoses you have to figure out the pump you have.

If you need brackets, I would look at Summit

**Corts60** · 03-06-2020, 12:48 PM

Quote:

Originally Posted by spspspspoon

Not at all Sorry

just slowly replacing stuff on my engine finding out that the parts were just beating up and more used than previously thought

I've been wrenching for 30+ yrs
we all have those F it moments

I ended up taking apart my old pump and noticing that the pump itself has the threads in it to put that mounting bolt so I'm going to have to just drill into the case and put the mounting stud there

But again the bracket that I picked up fits too snugly to the pump sides and not enough room to even adjust it if mounted correctly
seems that my pump is a little taller than the ones I've seen in all of the pictures

metric?
my pump to box hose seems to be both flanged And O ring?

Usually the fitting is inverted flare I believe. Pics would help.

I also second keeping the language clean. A lot of great people on this site who are here to help.

REDROCKER652002 · 03-06-2020, 05:36 PM

Having to deal with my son's 69 and it's mismatched parts, I feel your pain. Keep at it, and relax. Have a beer, take a deep breath and post away. Somebody here is gonna be able to help you out. My son's front brake setup was from a 72, his heater in the cab was from who knows where. LOL. That is part of the fun of dealing with an old truck that you have no idea where it came from. Take it slow, enjoy the ride and relax man. Have a beer, don't cost nuthing. LOL

**MySons68C20** · 03-06-2020, 06:43 PM

Can the mod change the title of the thread?

ImpalaJim · 03-06-2020, 07:42 PM

I myself curse nonstop but its NOT needed here!!!!

REDROCKER652002 · 03-06-2020, 08:48 PM

He didn't curse. He just vented. LOL. I think the symbol thing has been used for ever, so let's just relax folks. We are all adults here. Again, have a beer, don't cost nuthin. LOL

**slepysal** · 03-07-2020, 12:58 AM

I thought he was taking about a Mount Franklin power steering pump......

LostMy65 · 03-07-2020, 01:39 AM

Stinky poo poo boogger eating tissue wipe!
I am so mad!

**The Rocknrod** · 03-07-2020, 08:05 AM

Quote:

Originally Posted by ImpalaJim

I myself curse nonstop but its NOT needed here!!!!

Same here (as you can imagine). One of things I like about this site.

**70cst** · 03-07-2020, 09:20 AM

Quote:

Originally Posted by REDROCKER652002

He didn't curse. He just vented. LOL. I think the symbol thing has been used for ever, so let's just relax folks. We are all adults here. Again, have a beer, don't cost nuthin. LOL

This tittle is not acceptable ... these forums are geared towards a family oriented site.

**70cst** · 03-07-2020, 09:22 AM

Quote:

Originally Posted by spspspspoon

SBC power steering pump
with stock steel mount?
Picked up a new power steering pump( 20-7920F) as well as bracket
pump does not have lower rear mounting stud!??
And all the mounts I've seen (exc my bent to stock steal one) seem to require lower rear mounting stud??

I need either a mount that works With Out Rear Lower Mount Stud
Or the same type I have maybe smaller or? and has a Rear Mount Stud

mounted lower driver position
LWP

This tittle is not acceptable ... these forums are geared towards a family oriented site. Your title was changed along with the heading in each response. ... Please adhere to the rules and keep these post family friendly. Thanks

LostMy65 · 03-07-2020, 11:10 AM

Quote:

Originally Posted by 70cst

This tittle is not acceptable ... these forums are geared towards a family oriented site. Your title was changed along with the heading in each response. ... Please adhere to the rules and keep these post family friendly. Thanks

That's how grown-ups talk.

AcampoDave · 03-07-2020, 11:34 AM

If you start letting good manners slide, foul language eventually turns into personal insults....I've seen it on other forums while researching various projects. I appreciate the fact that the rules are enforced around here.

03-05-2020, 08:15 PM	#1
spspspspoon Registered User Join Date: Sep 2018 Location: New Orleans Posts: 30	Power Steering!!?? SBC power steering pump with stock steel mount? Picked up a new power steering pump( 20-7920F) as well as bracket pump does not have lower rear mounting stud!?? And all the mounts I've seen (exc my bent to stock steal one) seem to require lower rear mounting stud?? I need either a mount that works With Out Rear Lower Mount Stud Or the same type I have maybe smaller or? and has a Rear Mount Stud mounted lower driver position LWP Last edited by 70cst; 03-07-2020 at 09:13 AM.

03-05-2020, 08:28 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Power Steering!!?? What was the middle thing again? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by 70cst; 03-07-2020 at 09:13 AM.

03-05-2020, 08:53 PM	#3
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Power Steering!!?? You can put the new guts in your old can. Careful on the colorful language, it is a family oriented site. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic Last edited by 70cst; 03-07-2020 at 09:14 AM.

03-06-2020, 01:37 AM	#4
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,809	Power Steering!!?? if yer that excited over the wrong parts, may want to consider a new hobby.. as for the correct bracket/pump configuration. your application information may lead a board member to a solution for you.. good luck! __________________ *I started out with nothing - and I still have most of it* Last edited by 70cst; 03-07-2020 at 09:14 AM.

03-06-2020, 03:04 AM	#5
spspspspoon Registered User Join Date: Sep 2018 Location: New Orleans Posts: 30	Power Steering!!?? Not at all Sorry just slowly replacing stuff on my engine finding out that the parts were just beating up and more used than previously thought I've been wrenching for 30+ yrs we all have those F it moments I ended up taking apart my old pump and noticing that the pump itself has the threads in it to put that mounting bolt so I'm going to have to just drill into the case and put the mounting stud there But again the bracket that I picked up fits too snugly to the pump sides and not enough room to even adjust it if mounted correctly seems that my pump is a little taller than the ones I've seen in all of the pictures metric? my pump to box hose seems to be both flanged And O ring? Last edited by 70cst; 03-07-2020 at 09:14 AM. Reason: misspelling

03-06-2020, 10:56 AM	#7
rpmerf Registered User Join Date: Feb 2011 Location: Parkville, MD Posts: 1,024	Power Steering!!?? Some thoughts. Unless you've owned the truck since new, you don't know what has been changed over the years. Really inspect old parts before buying new parts. Don't be surprised when things don't fit. I usually go on Rock Auto and look closely at pictures, and options before buying anything. Look for parts for later generations also, they might had been swapped in years ago. You mentioned metric. I think power steering stuff switched to metric sizes about 78ish. Might look for the hoses you have to figure out the pump you have. If you need brackets, I would look at Summit __________________ 1970 C20 Custom Camper - 350, TH350 1997 GMC Suburban 1994 Acura Integra GSR 1987 Dodge Daytona Shelby Z Last edited by 70cst; 03-07-2020 at 09:15 AM.

03-06-2020, 05:36 PM	#9
REDROCKER652002 Registered User Join Date: Nov 2018 Location: South San Francisco CA, Posts: 441	Power Steering!!?? Having to deal with my son's 69 and it's mismatched parts, I feel your pain. Keep at it, and relax. Have a beer, take a deep breath and post away. Somebody here is gonna be able to help you out. My son's front brake setup was from a 72, his heater in the cab was from who knows where. LOL. That is part of the fun of dealing with an old truck that you have no idea where it came from. Take it slow, enjoy the ride and relax man. Have a beer, don't cost nuthing. LOL Last edited by 70cst; 03-07-2020 at 09:16 AM.

03-06-2020, 06:43 PM	#10
MySons68C20 Senior Member Join Date: Sep 2014 Location: Wenatchee, Wa Posts: 929	Power Steering!!?? Can the mod change the title of the thread? Last edited by 70cst; 03-07-2020 at 09:16 AM.

03-06-2020, 07:42 PM	#11
ImpalaJim Registered User Join Date: May 2014 Location: Kewanee IL Posts: 283	Power Steering!!?? I myself curse nonstop but its NOT needed here!!!! Last edited by 70cst; 03-07-2020 at 09:16 AM.

03-06-2020, 08:48 PM	#12
REDROCKER652002 Registered User Join Date: Nov 2018 Location: South San Francisco CA, Posts: 441	Power Steering!!?? He didn't curse. He just vented. LOL. I think the symbol thing has been used for ever, so let's just relax folks. We are all adults here. Again, have a beer, don't cost nuthin. LOL Last edited by 70cst; 03-07-2020 at 09:17 AM.

03-07-2020, 12:58 AM	#13
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Power Steering!!?? I thought he was taking about a Mount Franklin power steering pump...... __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by 70cst; 03-07-2020 at 09:17 AM.

03-07-2020, 01:39 AM	#14
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Power Steering!!?? Stinky poo poo boogger eating tissue wipe! I am so mad! __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 Last edited by 70cst; 03-07-2020 at 09:17 AM.

03-07-2020, 11:34 AM	#19
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,774	Re: Power Steering!!?? If you start letting good manners slide, foul language eventually turns into personal insults....I've seen it on other forums while researching various projects. I appreciate the fact that the rules are enforced around here.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.