Anyone have front springs out that you can measure for me? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Arne · 04-18-2023, 06:24 PM

I could still use confirmation of the small pigtail ID, but it's looking like I could get ⅝" with a pair of these at the top...

Name: Screen Shot 2023-04-18 at 3.00.42 PM.jpg
Views: 115
Size: 16.0 KB

Name: Screen Shot 2023-04-18 at 3.00.42 PM.jpg
Views: 115
Size: 16.0 KB

66C10LB · 04-19-2023, 02:29 PM

This image is of a new Moog front spring for my 1966 C10.

Arne · 04-19-2023, 04:52 PM

Quote:

Originally Posted by 66C10LB

This image is of a new Moog front spring for my 1966 C10.

Thanks. That pretty much seals it, the spacers I was looking at aren't going to work. I'm going to need to pull one of the springs out and look for ID numbers or paint marks to figure out what I have, and what I need to raise it an inch. Probably sometime later this week.

04-18-2023, 06:24 PM	#1
Arne Registered User Join Date: Sep 2022 Location: Eugene, OR Posts: 490	Re: Anyone have front springs out that you can measure for me? I could still use confirmation of the small pigtail ID, but it's looking like I could get ⅝" with a pair of these at the top... __________________ . - Arne Finished Project - 1964 C10 Stepside, mild restomod ———————————— Last edited by Arne; 04-18-2023 at 07:08 PM.

04-19-2023, 02:29 PM	#2
66C10LB Registered User Join Date: Jul 2016 Location: West Kelowna, BC, Canada Posts: 204	Re: Anyone have front springs out that you can measure for me? This image is of a new Moog front spring for my 1966 C10. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.