Pics of the Burb - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joe67 · 07-06-2005, 08:39 AM

Nice Suburban!!! Love the pics, thanks

Rokcrln · 07-06-2005, 10:10 PM

Here is a link to the site for the hinges. Scroll down to hood and then hinges.
http://www.sachserodshop.com/catalog/

How is the fitment of the hood with this type of hinge? Is it a tight secure fit or is theis a little lift and movement in the rear of teh hood?
Thanks for any info you can give. And again pic's pic's pic's

Kevin

*ghetocrewzer* · 07-06-2005, 10:25 PM

Quote:

Originally Posted by Rokcrln

Here is a link to the site for the hinges. Scroll down to hood and then hinges.
http://www.sachserodshop.com/catalog/

How is the fitment of the hood with this type of hinge? Is it a tight secure fit or is theis a little lift and movement in the rear of teh hood?
Thanks for any info you can give. And again pic's pic's pic's

Kevin

Hood is tight and it is very smooth lift when u lift it I love these hinges ill get some pics tomorrow and post em Thankx guys

milehightoyz · 07-10-2005, 03:09 AM

looks awesome!!! im a buick fanatic and I must say those portholes are gonna set those front fenders off! very good taste! i dig it! oh by the way that shotgun scoop is *****in too.

*ghetocrewzer* · 07-10-2005, 11:50 AM

Thanks mile!!!! The shotgun scoop is no longer on it though guy off here purchased it from me and i got an oval flamed air cleaner that would fit under the hood easily.

Rokcrln · 07-10-2005, 01:35 PM

So Gheto~ Where are those hood hinge pics? Also what did you do suspention wise on yours to achieve that stance?

Kevin

*ghetocrewzer* · 07-10-2005, 06:08 PM

I took the pics but the camera is at the shop i'll post em tomorrow evening after work.

Rokcrln · 07-10-2005, 07:21 PM

Thanks, So what did it take to get 20-22's on the front and sit it that low. Bags, spindles, fender chopping?...

Kevin

*ghetocrewzer* · 07-11-2005, 08:50 PM

I raised the front engine crossmember 1.5 inches, bags with upper plates and no lower cups, 2.5 inch drop spindles, custom tierods, and custom sterring shaft.

*ghetocrewzer* · 07-11-2005, 09:05 PM

Few pics of the Sasche Rod Shop hinges and 67 hood install progress. Had to cut the firewall out and weld in new plate is reason the firewall has body filler on right side its just a skim coat i gotta knock down and prime. Gotta finish hood install, fab rear floorboard, and do all the bodywork (skim coating whole truck after hammer/dolly work and strippin to bare metal/epoxy priming) then ima remove engine build wheel tubs and refinish all of it again including the engine block and intake.

**gregfull** · 07-11-2005, 09:44 PM

gheto, looking gooooood! I'm putting the same hinges on my hood, but what's up with the 67 hood? Does this hood fit without any mods? If not, how did you modify it? I'd like to borrow that idea on my burb. I like the slope of the 67-68 hood. Can't wait to see it finished.

*ghetocrewzer* · 07-11-2005, 10:14 PM

Only mod was cuttin 2.5 inches off leading edge at the grille and it is lookin like i gotta reshape cowl panel.

Rokcrln · 07-12-2005, 12:58 AM

Thanks, I am going to order mine next week!
What have you done to get it to the hight it is at? Mine Has a 2" body drop,"Z"ed frame, notch in back that needs to go about 3-4" bigger, 3" drop spindles and bags.

What are your plans for inner wells? I am going to section the inside of the fender and raise it up 2" (the section you removed) and this will match teh body drop and I hope I will be able to use stock inner wells.

Kevin

*ghetocrewzer* · 07-12-2005, 08:23 AM

Stock inner wells arent gonna work depending on rim/tire size, where they roll down on the inside is where the tire is actually gonna be sitting. Probally could totally reshape em and make them work though. Ima use trailer fenders and fill back in around them where they attach to the fender so its really clean.

86swb · 07-12-2005, 10:25 AM

Nice job. Can not wait to see the finish pictures.

Putter · 07-12-2005, 04:32 PM

Ghetto,
Didn't you relocate the shop??? I was in Lexington, then Durant today and passed by the old location a few times. I thought you mentioned that you moved up the street a ways. So....where did you go? I wanted to drop in and say "Hey" and maybe get another look at the burb.

EDIT: Oh, by the way, it is really coming together & looking slick!!!

*ghetocrewzer* · 07-12-2005, 06:47 PM

I moved about a mile South of the old shop on the same side of the road come on by and visit man u know i love to talk trucks LOL

Putter · 07-13-2005, 09:57 AM

A mile south??? Holly crap. We literally drove 1/2 to 3/4 of a mile south of the old location before turning around. Man...we must have been within 100 yards or so. Doooohhh.

*ghetocrewzer* · 07-14-2005, 09:56 PM

Big blue buidling with chain link fence all the way aroun, got a sign out front on the fence. Come in gate come through second gate and im right there, Burb is usually sittin out front so just look for it LOL

07-06-2005, 08:39 AM	#26
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Nice Suburban!!! Love the pics, thanks __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

07-11-2005, 09:05 PM	#35
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	Few pics of the Sasche Rod Shop hinges and 67 hood install progress. Had to cut the firewall out and weld in new plate is reason the firewall has body filler on right side its just a skim coat i gotta knock down and prime. Gotta finish hood install, fab rear floorboard, and do all the bodywork (skim coating whole truck after hammer/dolly work and strippin to bare metal/epoxy priming) then ima remove engine build wheel tubs and refinish all of it again including the engine block and intake. Attached Images

07-11-2005, 09:44 PM	#36
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 599	gheto, looking gooooood! I'm putting the same hinges on my hood, but what's up with the 67 hood? Does this hood fit without any mods? If not, how did you modify it? I'd like to borrow that idea on my burb. I like the slope of the 67-68 hood. Can't wait to see it finished. __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban

07-12-2005, 10:25 AM	#40
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Nice job. Can not wait to see the finish pictures. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

07-12-2005, 04:32 PM	#41
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Ghetto, Didn't you relocate the shop??? I was in Lexington, then Durant today and passed by the old location a few times. I thought you mentioned that you moved up the street a ways. So....where did you go? I wanted to drop in and say "Hey" and maybe get another look at the burb. EDIT: Oh, by the way, it is really coming together & looking slick!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 07-12-2005 at 04:32 PM.

07-06-2005, 10:10 PM	#27
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Here is a link to the site for the hinges. Scroll down to hood and then hinges. http://www.sachserodshop.com/catalog/ How is the fitment of the hood with this type of hinge? Is it a tight secure fit or is theis a little lift and movement in the rear of teh hood? Thanks for any info you can give. And again pic's pic's pic's Kevin

07-10-2005, 03:09 AM	#29
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	looks awesome!!! im a buick fanatic and I must say those portholes are gonna set those front fenders off! very good taste! i dig it! oh by the way that shotgun scoop is *****in too.

07-10-2005, 11:50 AM	#30
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	Thanks mile!!!! The shotgun scoop is no longer on it though guy off here purchased it from me and i got an oval flamed air cleaner that would fit under the hood easily.

07-10-2005, 01:35 PM	#31
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	So Gheto~ Where are those hood hinge pics? Also what did you do suspention wise on yours to achieve that stance? Kevin

07-10-2005, 06:08 PM	#32
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	I took the pics but the camera is at the shop i'll post em tomorrow evening after work.

07-10-2005, 07:21 PM	#33
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Thanks, So what did it take to get 20-22's on the front and sit it that low. Bags, spindles, fender chopping?... Kevin

07-11-2005, 08:50 PM	#34
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	I raised the front engine crossmember 1.5 inches, bags with upper plates and no lower cups, 2.5 inch drop spindles, custom tierods, and custom sterring shaft.

07-11-2005, 10:14 PM	#37
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	Only mod was cuttin 2.5 inches off leading edge at the grille and it is lookin like i gotta reshape cowl panel.

07-12-2005, 12:58 AM	#38
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Thanks, I am going to order mine next week! What have you done to get it to the hight it is at? Mine Has a 2" body drop,"Z"ed frame, notch in back that needs to go about 3-4" bigger, 3" drop spindles and bags. What are your plans for inner wells? I am going to section the inside of the fender and raise it up 2" (the section you removed) and this will match teh body drop and I hope I will be able to use stock inner wells. Kevin

07-12-2005, 08:23 AM	#39
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	Stock inner wells arent gonna work depending on rim/tire size, where they roll down on the inside is where the tire is actually gonna be sitting. Probally could totally reshape em and make them work though. Ima use trailer fenders and fill back in around them where they attach to the fender so its really clean.



Register or Log In To remove these advertisements.

07-12-2005, 06:47 PM	#42
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	I moved about a mile South of the old shop on the same side of the road come on by and visit man u know i love to talk trucks LOL

07-13-2005, 09:57 AM	#43
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	A mile south??? Holly crap. We literally drove 1/2 to 3/4 of a mile south of the old location before turning around. Man...we must have been within 100 yards or so. Doooohhh. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 07-13-2005 at 09:57 AM.

07-14-2005, 09:56 PM	#44
ghetocrewzer Account Suspended Join Date: Feb 2004 Location: Sallis,MS Posts: 479	Big blue buidling with chain link fence all the way aroun, got a sign out front on the fence. Come in gate come through second gate and im right there, Burb is usually sittin out front so just look for it LOL

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.