Parting out 70 LWB - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bighead · 06-18-2007, 10:26 PM

Ken, $8.50 shipping so $28.50 total. I'll pm my info incase you decide to get it. big

bighead · 06-20-2007, 10:21 AM

bump

cameeks · 06-21-2007, 01:59 AM

where you located at in North Texas

bighead · 06-21-2007, 08:28 AM

About 40 miles north of downtown Dallas on hwy 75. I also pass through Houston from time to time to go fishing in Surfside and might be able to meet up if you need something.

cameeks · 06-21-2007, 01:17 PM

I'm interested in looking at the grill but how life is it always is at the wrong time. Wife is out of a job right now so the cash flow got cut off for a bit. Just seeing if you were in driving range that way I can see it when she starts her new job. The PO sanded on mine and bondoed the dents then painted it. Tried to clean it up but it is too far gone for a bare alum. grill.

bighead · 06-21-2007, 03:32 PM

No problem, been there myself. Just pm me when things are better and see what I've still got. big

c-mack · 06-22-2007, 01:41 AM

hey big...is the steering wheel in ok cond. ?....if it is, how much to 75851?

bighead · 06-22-2007, 11:34 AM

I'll take a look and see. I'll pm yoiu when I know something.

faribran · 06-22-2007, 01:09 PM

Big, are u parting the interior.. if so.. can you provide pics of the arm rests.. plz?

faribran · 06-22-2007, 01:10 PM

big,
i am also looking for a good ignition switch with keys

bighead · 06-23-2007, 09:03 AM

OK, I'll be checking on tail light harnesses, steering wheel, arm rests and ignition switch on my next day off which is Monday. Thanks everybody.

xshadow · 06-23-2007, 10:56 PM

any way to ship a bedside to VA?

bighead · 06-24-2007, 07:48 AM

xshadow, I'll pm you.

the12catlady · 07-06-2007, 12:37 PM

are you going to the Missouri meet? i'd be interested in the transmission if so.

Dstrm1990 · 07-06-2007, 01:13 PM

I wanted to find out if the radiator support was available and the status of the front clip in general...ie. is it sold and if not would you sell intact?

bighead · 07-06-2007, 01:28 PM

Sorry catlady, I'm not able to go. D, the front end parts I have are spoken for. big

rlm316 · 07-06-2007, 02:08 PM

Hi, I was wondering what condition the wiring harnesses were in? I am interested in the engine and dash if the truck was a V8 and had gauges. Also the intermediary cable to the tail lights. Thanks, Lane

AuggieStyle · 07-06-2007, 03:43 PM

bighead how is the grille brace support? is it for sale. also did all the ac parts get snatched up? looking for the vents and hoses the control box? let me know

K5 Krazy · 07-06-2007, 03:44 PM

How much for the lighter shipped to 66212?

bighead · 07-06-2007, 04:21 PM

Sorry Auggie, the grill brace is gone and Deer Slayer got the AC stuff. RLM, the tail light harness from the cab back is good, $20 shipped, tail light to tail light harness is fair $8 shipped, $5 if you buy the other one. I'm not sure about the under dash harnesses, engine harness is trashed. It was a v8 full gauge truck but I'll have to check on my next days off which is Sunday. K5, $15 for the lighter shipped. I thought this thread was dead and now it springs back to life!! big

K5 Krazy · 07-06-2007, 10:35 PM

I'll take the lighter. Where do I send the $.

bighead · 07-06-2007, 10:41 PM

Paypal me at performancealloy@sbcglobal.net or pm me and I'll shoot you my snail mail. big

faribran · 07-08-2007, 12:02 PM

Big,
Arm rests or ignition with a key??

rlm316 · 07-11-2007, 08:31 AM

Big, I'll take the cab to tail harness. Let me know about the dash harness. Shipping to 08098 for total and payment info. Thanks, Lane

bighead · 07-11-2007, 04:28 PM

Lane, i'll pm you when I have the dash harness pulled. big

06-18-2007, 10:26 PM	#26
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB Ken, $8.50 shipping so $28.50 total. I'll pm my info incase you decide to get it. big

06-20-2007, 10:21 AM	#27
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB bump

06-21-2007, 01:59 AM	#28
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Parting out 70 LWB where you located at in North Texas __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

06-21-2007, 08:28 AM	#29
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB About 40 miles north of downtown Dallas on hwy 75. I also pass through Houston from time to time to go fishing in Surfside and might be able to meet up if you need something.

06-21-2007, 01:17 PM	#30
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Parting out 70 LWB I'm interested in looking at the grill but how life is it always is at the wrong time. Wife is out of a job right now so the cash flow got cut off for a bit. Just seeing if you were in driving range that way I can see it when she starts her new job. The PO sanded on mine and bondoed the dents then painted it. Tried to clean it up but it is too far gone for a bare alum. grill. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

06-21-2007, 03:32 PM	#31
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB No problem, been there myself. Just pm me when things are better and see what I've still got. big

06-22-2007, 01:41 AM	#32
c-mack Registered User Join Date: May 2007 Location: Crockett, Texas Posts: 581	Re: Parting out 70 LWB hey big...is the steering wheel in ok cond. ?....if it is, how much to 75851? __________________ 1967 chevy truck 350 V8 1973 VW Transporter/Hippy Bus 1964 VW Baja Bug "When the power of love overcomes the love of power the world will know peace"- Jimi Hendrix

06-22-2007, 11:34 AM	#33
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB I'll take a look and see. I'll pm yoiu when I know something.

06-22-2007, 01:09 PM	#34
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out 70 LWB Big, are u parting the interior.. if so.. can you provide pics of the arm rests.. plz? __________________ "

06-22-2007, 01:10 PM	#35
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out 70 LWB big, i am also looking for a good ignition switch with keys __________________ "

06-23-2007, 09:03 AM	#36
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB OK, I'll be checking on tail light harnesses, steering wheel, arm rests and ignition switch on my next day off which is Monday. Thanks everybody.

06-23-2007, 10:56 PM	#37
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: Parting out 70 LWB any way to ship a bedside to VA?

06-24-2007, 07:48 AM	#38
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB xshadow, I'll pm you.

07-06-2007, 12:37 PM	#39
the12catlady Registered User Join Date: Jun 2006 Location: N.E. Oklahoma Posts: 5	Re: Parting out 70 LWB are you going to the Missouri meet? i'd be interested in the transmission if so. __________________ 1970 chevy c-10 pre-restoration

07-06-2007, 01:13 PM	#40
Dstrm1990 Junior Member Join Date: Jun 2007 Location: Keller, Texas Posts: 142	Re: Parting out 70 LWB I wanted to find out if the radiator support was available and the status of the front clip in general...ie. is it sold and if not would you sell intact?



Register or Log In To remove these advertisements.

07-06-2007, 01:28 PM	#41
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB Sorry catlady, I'm not able to go. D, the front end parts I have are spoken for. big

07-06-2007, 02:08 PM	#42
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Parting out 70 LWB Hi, I was wondering what condition the wiring harnesses were in? I am interested in the engine and dash if the truck was a V8 and had gauges. Also the intermediary cable to the tail lights. Thanks, Lane

07-06-2007, 03:43 PM	#43
AuggieStyle Registered User Join Date: Apr 2007 Location: Dallas,TX. Posts: 499	Re: Parting out 70 LWB bighead how is the grille brace support? is it for sale. also did all the ac parts get snatched up? looking for the vents and hoses the control box? let me know

07-06-2007, 03:44 PM	#44
K5 Krazy New Member Join Date: May 2007 Location: Overland Park, KS Posts: 19	Re: Parting out 70 LWB How much for the lighter shipped to 66212? __________________ Daryl --1972 K/5 Blazer

07-06-2007, 04:21 PM	#45
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB Sorry Auggie, the grill brace is gone and Deer Slayer got the AC stuff. RLM, the tail light harness from the cab back is good, $20 shipped, tail light to tail light harness is fair $8 shipped, $5 if you buy the other one. I'm not sure about the under dash harnesses, engine harness is trashed. It was a v8 full gauge truck but I'll have to check on my next days off which is Sunday. K5, $15 for the lighter shipped. I thought this thread was dead and now it springs back to life!! big

07-06-2007, 10:35 PM	#46
K5 Krazy New Member Join Date: May 2007 Location: Overland Park, KS Posts: 19	Re: Parting out 70 LWB I'll take the lighter. Where do I send the $. __________________ Daryl --1972 K/5 Blazer

07-06-2007, 10:41 PM	#47
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB Paypal me at performancealloy@sbcglobal.net or pm me and I'll shoot you my snail mail. big

07-08-2007, 12:02 PM	#48
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out 70 LWB Big, Arm rests or ignition with a key?? __________________ "

07-11-2007, 08:31 AM	#49
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Parting out 70 LWB Big, I'll take the cab to tail harness. Let me know about the dash harness. Shipping to 08098 for total and payment info. Thanks, Lane

07-11-2007, 04:28 PM	#50
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Parting out 70 LWB Lane, i'll pm you when I have the dash harness pulled. big

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode