Need a 5 lug rearend, what're my options.. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 05-23-2010, 11:05 PM

Whats yalls take on redrilling? Safe or what?

chevy283 · 05-24-2010, 05:27 PM

i had mine redrilled and drove it for 3 years with no problems.

c10seconds · 05-24-2010, 06:27 PM

My stock 6 lug axles were redrilled to 5 lug and took a beating from my big block. Never had any issues.

oldblue1968chevy · 05-24-2010, 10:30 PM

Cool! I didnt hear from the machine shop today but when they call back i'll ask em about redrilling..

what did it cost you guys and did you need to buy the studs or did they get them? Where could I get em at too? Thanks

C20-67_N_MO · 05-24-2010, 10:33 PM

If you were closer I would sell you mine. I have one out of a '71 or '72 for coil springs.

But good luck on your hunt/swap.

oldblue1968chevy · 05-24-2010, 10:35 PM

where ya located lol

C20-67_N_MO · 05-24-2010, 10:38 PM

Just south of St. Louis in Jefferson County Missouri

oldblue1968chevy · 05-24-2010, 10:43 PM

how far from paducka KY (sp?) and how much and what gear ratio? Thanks I PROBABLY wont get it from ya but I may make a trip to grand rivers (just south on I 24 from paduka)

C20-67_N_MO · 05-25-2010, 11:21 AM

I honestly don't know the distance, but you can map it to 63049.

As far as the gear ratio, not sure, as I have not popped off the rear diff cover to check.

*Fitz* · 05-25-2010, 04:08 PM

Strange Engineering replacement C clip axles ,5 or 6 lug, for 12 bolt truck...249.95/pair. Measure yours, count the splines and pick up the phone.

oldblue1968chevy · 05-25-2010, 06:03 PM

Ok

Well ima look into the price of redrilling my existing axles then look into aftermarket ones thanks guys!

05-23-2010, 11:05 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Need a 5 lug rearend, what're my options.. Whats yalls take on redrilling? Safe or what? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

05-24-2010, 05:27 PM	#2
chevy283 Registered User Join Date: Dec 2004 Location: wilson oklahoma Posts: 367	Re: Need a 5 lug rearend, what're my options.. i had mine redrilled and drove it for 3 years with no problems. __________________ 65 c10 tore apart 70 c10 305/350th

05-24-2010, 06:27 PM	#3
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Need a 5 lug rearend, what're my options.. My stock 6 lug axles were redrilled to 5 lug and took a beating from my big block. Never had any issues.

05-24-2010, 10:30 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Need a 5 lug rearend, what're my options.. Cool! I didnt hear from the machine shop today but when they call back i'll ask em about redrilling.. what did it cost you guys and did you need to buy the studs or did they get them? Where could I get em at too? Thanks __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

05-24-2010, 10:33 PM	#5
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Need a 5 lug rearend, what're my options.. If you were closer I would sell you mine. I have one out of a '71 or '72 for coil springs. But good luck on your hunt/swap. __________________ Coming Soon: Project 1970 Country Truck

05-24-2010, 10:35 PM	#6
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Need a 5 lug rearend, what're my options.. where ya located lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

05-24-2010, 10:38 PM	#7
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Need a 5 lug rearend, what're my options.. Just south of St. Louis in Jefferson County Missouri __________________ Coming Soon: Project 1970 Country Truck

05-24-2010, 10:43 PM	#8
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Need a 5 lug rearend, what're my options.. how far from paducka KY (sp?) and how much and what gear ratio? Thanks I PROBABLY wont get it from ya but I may make a trip to grand rivers (just south on I 24 from paduka) __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

05-25-2010, 11:21 AM	#9
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Need a 5 lug rearend, what're my options.. I honestly don't know the distance, but you can map it to 63049. As far as the gear ratio, not sure, as I have not popped off the rear diff cover to check. __________________ Coming Soon: Project 1970 Country Truck

05-25-2010, 04:08 PM	#10
Fitz Account Suspended Join Date: Jan 2007 Location: Tucson Posts: 2,183	Re: Need a 5 lug rearend, what're my options.. Strange Engineering replacement C clip axles ,5 or 6 lug, for 12 bolt truck...249.95/pair. Measure yours, count the splines and pick up the phone.

05-25-2010, 06:03 PM	#11
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Need a 5 lug rearend, what're my options.. Ok Well ima look into the price of redrilling my existing axles then look into aftermarket ones thanks guys! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.