MI K1416 Suburban part-out- Rolling Chassis

[VictoriaHardware]

Originally Posted by 1960chevypanel

Ok I'll take those

Here are pics. Weighs 4# shipped.

[wcstory]

Originally Posted by VictoriaHardware

Is this what you need?

Sorry for the delay.

Yes that is it. How much? It should fit in a flat rate box.

[VictoriaHardware]

Originally Posted by wcstory

How much? It should fit in a flat rate box.

I really don't know how to price this other than I know how much time I have in it. How does $25 sound? It does fit in a USPS Large Flat Rate box, so total would be 25+21.10+PP fees. PM sent for payment info should you want it.

SOLD

[southern parts]

i`m interested in the rod between the ps gear box and the front axle. how much shipped to elberton ga 30635 ?

[VictoriaHardware]

Originally Posted by southern parts

i`m interested in the rod between the ps gear box and the front axle. how much shipped to elberton ga 30635 ?

Not sure which one you're talking about. In this pic there's the Pitman arm, some other rod with tie rod ends on it, and another arm bolted to the knuckle. I can tell you the "tie rod part" is homemade.

[southern parts]

I hesitated to call it a tie rod because I knew it had to be homemade. I have a 68 Suburban with closed knuckle front end that I'm trying to add power steering to. Does it look cobbled together or like somebody did a decent job?

[VictoriaHardware]

Originally Posted by southern parts

Does it look cobbled together or like somebody did a decent job?

Actually not bad. The one tie rod end is welded to the sleeve. How about $15? Shipping weight is 5# and it will fit in a Med Flat Rate box @ $15.50

SOLD

[wcstory]

Originally Posted by VictoriaHardware

Is this what you need?

Parts arrived today. Well packed and in the condition depicted.

Thank you

[1960chevypanel]

Got the mounts, thanks. Do you have this brace?

[VictoriaHardware]

Originally Posted by 1960chevypanel

Do you have this brace?

I assume you're talking about the crossmember. It's heavily rust pitted and has part of a trailer hitch welded to it. It also got chunks cut off when the rest was cut with a torch. So it's not better than what you have now.

[VictoriaHardware]

Parts remaining- prices plus shipping & PP fees

Axle, front $200
'65 Dana 44 Closed Knuckle, 3.73, open carrier, 6 lug, excellent condition, no shipping

Axle, rear $50 SOLD
'65 3.73, open carrier, 6 lug, fair condition, no shipping

Transmission $200 SOLD
'69 SM465 4 spd, no shipping

Cylinder Heads, 3932441 $100 SOLD
Both dated A-9-9. bare castings

Steering Gear w/ pitman arm $125
Integral box, '69 (?)

[VictoriaHardware]

Crossmember $75
K10 manual transmission, with spring mounts and hardware

Lift blocks $50 SOLD
cast iron, rear axle, with clamps

Jounce Bumper Blocks $25
cast iron, front axle

Spring Mounts $25 ea SOLD
Front - forward LH, forward RH
Rear - forward LH, forward RH, rearward RH

[VictoriaHardware]

Brass Fittings- $25 SOLD
brake plumbing, 4 pcs

Clutch Linkage $25
Frame bracket, cross shaft, Rod, Lever w/ Hardware

[1960chevypanel]

Originally Posted by VictoriaHardware

I assume you're talking about the crossmember. It's heavily rust pitted and has part of a trailer hitch welded to it. It also got chunks cut off when the rest was cut with a torch. So it's not better than what you have now.

Ok thanks for checking on it

[whateverpratt]

How bad are the suburban/panel/carryall specific rear frame pieces, or do you still have them at all?

[VictoriaHardware]

Originally Posted by whateverpratt

How bad are the suburban/panel/carryall specific rear frame pieces, or do you still have them at all?

Rest of the truck had a hot date with the torch.

[chtr65]

I will take the brass fittings for brake lines.

[aotte1]

How are the front horns, what price are they? I will take depending on price.
Cut behind the motor mounts and include radiator crossmember. Send photos please of frame as is now.

Price on the front spring Mounting brackets, will take pending price.

Price for rear spring shackles front and rear, will take pending price. Will you take 100 for the five of them?

[aotte1]

I will take the transfer case shift linkage pending price/shipping.
Photo of needed parts circled in yellow. All except pins in TC.

[VictoriaHardware]

Originally Posted by aotte1

How are the front horns, what price are they? I will take depending on price.
Cut behind the motor mounts and include radiator crossmember. Send photos please of frame as is now.

Price on the front spring Mounting brackets, will take pending price.

Price for rear spring shackles front and rear, will take pending price. Will you take 100 for the five of them?

I will take the transfer case shift linkage pending price/shipping.

Frame horns- cracked & bent. Not bad but not perfect. I will get pics tomorrow
Rad crossmember- pics tomorrow
Rest of frame - pics tomorrow
Spring mounts- $100 for 5 is OK
Transfer case & all associated parts are already sold

[aotte1]

I will take the 5 spring mounts. Maybe ship in large Usps flats rate box.
Ok if wait, to pay until we finish if getting additional parts after tomorrow Pictures.

Thanks,

[VictoriaHardware]

Rad crossmember- Some rust, couple nicks from the torch, but very usable. Truck had never been in an accident so part is straight $20

[VictoriaHardware]

Frame horns- cracked & bent, some rust $20/pr
Rest of frame - Sad picture. Valued @ $.50 in scrap steel

[aotte1]

Thanks for pictures:
Will take the front frame horns.
And left front frame rail sections circled in yellow. Will confirm with you frame rail needEd on left side with engine mount in more detail. Do you have frame right side engine mount/perch? Will take if you have too.

Also in second photo, do you have both side of rear frame circled in yellow?

Third photo below do you have the body mount circled both side?

[VictoriaHardware]

Originally Posted by aotte1

left front frame rail sections circled in yellow. ... with engine mount in more detail.

Do you have frame right side engine mount/perch?

LH front section has numerous extra holes and welding where a non-factory power steering box was. Not bad rust though.

Next LH frame section is not bad rust-wise. Factory engine mount is good. Truck was originally a 292 six.

RH engine mount is not original- see bolts. A 350 V8 had been transplanted and the RH engine mount did not fit correctly. In fact the RH side of the engine was held in by gravity, so I don't think this will be of any good to you.