MI K1416 Suburban part-out- Rolling Chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**VictoriaHardware** · 01-04-2020, 03:33 PM

1965 4WD Suburban Carryall rolling chassis. $900

1968 350 4 Barrel V8. 350/255 hp, does not turn over. Block casting 3956618.
Non-original SM465 4 spd trans. Transfer case missing shifter.
Front/rear suspension and brakes all there. Axles have 3.73 gears (non-posi). Factory Optional (RPO F76) Spicer/Dana lock-out hubs. All driveshafts are there. Non-original power steering.

This was acquired as a roller and was supposedly sitting in a barn for last 20 years. Body was very rusty and is being parted or scrapped out. Frame is also rusty. Came from Michigan & Wisconsin. No evidence of any significant accidents- just many body dings. Had a trailer hitch. No evidence of a snow plow.

**VictoriaHardware** · 01-04-2020, 03:36 PM

More pics

**bhc41051** · 01-07-2020, 04:19 PM

I can't tell by my phone but are those Gateway Gumbo Mudder tires?

Brad54 · 01-08-2020, 10:58 AM

How much for the power steering box and arm?
And if a short water pump, how much for PS pump/bracket and engine pulleys? (I may not need the pulleys)

**VictoriaHardware** · 01-08-2020, 08:50 PM

Quote:

Originally Posted by Brad54

How much for the power steering box and arm?

I'll begin parting this out if it it won't sell as a unit. That will be a while. The mounting of the pump and box looks amateur to me, but apparently it worked.

**VictoriaHardware** · 01-09-2020, 08:35 PM

More pics

**chtr65** · 01-10-2020, 12:41 AM

They are what I am looking for. If you decide to sell them, please let me know what you need to get for both sides. Thanks, Mike

63burban · 01-12-2020, 07:41 PM

Wish it were a lwb truck chassis

64chevycrewcab · 01-18-2020, 09:01 PM

I have a decent GMC 4x4 Suburban body in Mt Pleasant MI for sale

Bhart · 02-28-2020, 07:46 PM

Do you still have the suburban chassis? If so where are you located?
Thanks
Posted via Mobile Device

Brad54 · 02-29-2020, 12:06 AM

I'll go with one of Captain Fab's ps box mounts then. Thanks for getting back to me.
If you part it out, I'd be interested in the riser blocks and rear U-bolts.
-Brad

**Subdude59** · 03-01-2020, 01:10 AM

Is this 4x4 Burb frame a GMC or Chevy?

**VictoriaHardware** · 03-01-2020, 08:18 AM

Quote:

Originally Posted by Subdude59

Is this 4x4 Burb frame a GMC or Chevy?

Chevrolet

**VictoriaHardware** · 08-26-2020, 06:26 PM

Quote:

Originally Posted by Brad54

If you part it out, I'd be interested in the riser blocks and rear U-bolts.
-Brad

This is being parted out now. Still interested in the riser blocks? U-bolts are rusted and have been cut with a torch.

j.kirn · 08-27-2020, 12:02 AM

How much for T-case?

**VictoriaHardware** · 08-27-2020, 01:15 PM

Quote:

Originally Posted by j.kirn

how much for t-case?

$100

j.kirn · 08-27-2020, 03:18 PM

pm sent

1960chevypanel · 08-27-2020, 03:39 PM

Price on locking hubs? Also sending a couple of people your way for rear frame horns and a leaf spring hanger.

**VictoriaHardware** · 08-27-2020, 04:36 PM

Quote:

Originally Posted by 1960chevypanel

Price on locking hubs? Also sending a couple of people your way for rear frame horns and a leaf spring hanger.

Hub Loks are SOLD
Rear frame sections are heavily rusted
All leaf spring hangers are OK

**wcstory** · 08-28-2020, 10:36 PM

I'm interested in the driver's side rear hanger if it is intact

**VictoriaHardware** · 08-29-2020, 01:03 PM

Quote:

Originally Posted by wcstory

I'm interested in the driver's side rear hanger if it is intact

Is this what you need?

1960chevypanel · 08-29-2020, 09:26 PM

How much for the core support mounts?

**VictoriaHardware** · 08-29-2020, 10:40 PM

Quote:

Originally Posted by 1960chevypanel

How much for the core support mounts?

$25 /pr. One is OK, other has rubber de-laminated.

**VictoriaHardware** · 08-30-2020, 12:43 PM

Transfer case, mounting brackets, crossmember, and all driveshafts have been SOLD locally.

1960chevypanel · 08-30-2020, 08:55 PM

Quote:

Originally Posted by VictoriaHardware

$25 /pr. One is OK, other has rubber de-laminated.

Ok I'll take those

01-04-2020, 03:33 PM	#1
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 792	K1416 Suburban part-out- Rolling Chassis 1965 4WD Suburban Carryall rolling chassis. $900 1968 350 4 Barrel V8. 350/255 hp, does not turn over. Block casting 3956618. Non-original SM465 4 spd trans. Transfer case missing shifter. Front/rear suspension and brakes all there. Axles have 3.73 gears (non-posi). Factory Optional (RPO F76) Spicer/Dana lock-out hubs. All driveshafts are there. Non-original power steering. This was acquired as a roller and was supposedly sitting in a barn for last 20 years. Body was very rusty and is being parted or scrapped out. Frame is also rusty. Came from Michigan & Wisconsin. No evidence of any significant accidents- just many body dings. Had a trailer hitch. No evidence of a snow plow. Attached Images

01-04-2020, 03:36 PM	#2
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 792	Re: K1416 Suburban part-out- Rolling Chassis More pics Attached Images

01-07-2020, 04:19 PM	#3
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: K1416 Suburban part-out- Rolling Chassis I can't tell by my phone but are those Gateway Gumbo Mudder tires?

01-08-2020, 10:58 AM	#4
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: K1416 Suburban part-out- Rolling Chassis How much for the power steering box and arm? And if a short water pump, how much for PS pump/bracket and engine pulleys? (I may not need the pulleys) __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

01-09-2020, 08:35 PM	#6
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 792	Re: K1416 Suburban part-out- Rolling Chassis More pics Attached Images

01-10-2020, 12:41 AM	#7
chtr65 Registered User Join Date: Mar 2013 Location: Lewisberry, Pa. Posts: 544	Re: K1416 Suburban part-out- Rolling Chassis They are what I am looking for. If you decide to sell them, please let me know what you need to get for both sides. Thanks, Mike

01-12-2020, 07:41 PM	#8
63burban Chevy addict Join Date: May 2012 Location: Iron Ridge, WI Posts: 1,085	Re: K1416 Suburban part-out- Rolling Chassis Wish it were a lwb truck chassis

01-18-2020, 09:01 PM	#9
64chevycrewcab Registered User Join Date: Feb 2013 Location: Mt. Pleasant, Michigan Posts: 143	Re: K1416 Suburban part-out- Rolling Chassis I have a decent GMC 4x4 Suburban body in Mt Pleasant MI for sale __________________ 1961 Apache 10 with side trim 1964 4 door crew cab C20 1966 Chevy Suburban with custom trim 1961 K30 with a 4-53T Detroit diesel 1966 GMC 4X4 Suburban

02-28-2020, 07:46 PM	#10
Bhart Registered User Join Date: Apr 2019 Location: Indiana Posts: 3	Re: K1416 Suburban part-out- Rolling Chassis Do you still have the suburban chassis? If so where are you located? Thanks Posted via Mobile Device

02-29-2020, 12:06 AM	#11
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: K1416 Suburban part-out- Rolling Chassis I'll go with one of Captain Fab's ps box mounts then. Thanks for getting back to me. If you part it out, I'd be interested in the riser blocks and rear U-bolts. -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

03-01-2020, 01:10 AM	#12
Subdude59 Active Member Join Date: Dec 2014 Location: Columbus, IN Posts: 196	Re: K1416 Suburban part-out- Rolling Chassis Is this 4x4 Burb frame a GMC or Chevy?

08-27-2020, 12:02 AM	#15
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: K1416 Suburban part-out- Rolling Chassis How much for T-case?

08-27-2020, 03:18 PM	#17
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: K1416 Suburban part-out- Rolling Chassis pm sent

08-27-2020, 03:39 PM	#18
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: K1416 Suburban part-out- Rolling Chassis Price on locking hubs? Also sending a couple of people your way for rear frame horns and a leaf spring hanger.

08-28-2020, 10:36 PM	#20
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: K1416 Suburban part-out- Rolling Chassis I'm interested in the driver's side rear hanger if it is intact __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos



Register or Log In To remove these advertisements.

08-29-2020, 09:26 PM	#22
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,622	Re: K1416 Suburban part-out- Rolling Chassis How much for the core support mounts?

08-30-2020, 12:43 PM	#24
VictoriaHardware Senior Member Join Date: Nov 2012 Location: Southeast Michigan Posts: 792	Re: K1416 Suburban part-out- Rolling Chassis Transfer case, mounting brackets, crossmember, and all driveshafts have been SOLD locally. Last edited by VictoriaHardware; 09-11-2020 at 09:36 AM.

Register or Log In To remove these advertisements.