project 62 - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bazooka · 08-22-2012, 09:50 PM

Havent checked in with your project in awhile. Glad your still chipping away at it..

Solo2002 · 08-24-2012, 08:47 PM

You got a killer truck man love it
Posted via Mobile Device

**scotts62** · 08-24-2012, 09:44 PM

Thanks guys, coming along slowly.

**scotts62** · 08-24-2012, 10:22 PM

Well i started the rats nest the other night.

I found a pile of wires under all of the insulation and tape!

This was after the wires not needed from the ECM were removed.

I am using the harness as a stand alone (just engine harness and wired into a fuse block) and this is after the C2 connector was cut off and labeled.

mcbassin · 08-25-2012, 09:38 AM

Nice progress on the harness
Posted via Mobile Device

Strodder · 08-25-2012, 10:42 AM

Let the fun begin..

**ChiefRocka** · 08-25-2012, 10:43 AM

Quote:

Originally Posted by scotts62

Story of my life, always a day late and 100 dollars short

Yep full fiberglass, had second thoughts after seeing the rides around here with the steel front end but its different and have not seen many with it so its gots ta stay

If you really want to be different, you could always use 'juice' to lift the cab too....

-
-

**scotts62** · 08-25-2012, 12:38 PM

are you kidding, im having a hard enough time to get it together with a stock body

**scotts62** · 08-25-2012, 08:44 PM

Rack and Pinion mocked up, frame and cross member notched. Pics soon

**ChiefRocka** · 08-26-2012, 06:27 PM

Quote:

Originally Posted by scotts62

are you kidding, im having a hard enough time to get it together with a stock body

Besides, you probably wanna drive it too ... and not be pushed off and on a trailer...

**scotts62** · 08-26-2012, 08:02 PM

Quote:

Originally Posted by ChiefRocka

Besides, you probably wanna drive it too ... and not be pushed off and on a trailer...

Exactly, if its out of state and on a trailer something bad happened

Alan's Classic · 08-26-2012, 09:08 PM

Quote:

Originally Posted by scotts62

Exactly, if its out of state and on a trailer something bad happened

Keep it up. you'll be done before you know it.

**scotts62** · 08-26-2012, 09:51 PM

Quote:

Originally Posted by Alan's Classic

Keep it up. you'll be done before you know it.

I sure hope so.. i worked on the wiring and the rack and pinion, its about done, just need the heim joints buttoned up and the steering is good to go

Solo2002 · 08-26-2012, 10:08 PM

amazing. I hear ya on the trailer queen why spend that much time and cash if you can't enjoy it for what it's build for to drive and show off.
Posted via Mobile Device

**scotts62** · 08-26-2012, 10:49 PM

Exactly!! Expensive tires are meant to get worn out

**scotts62** · 08-27-2012, 10:20 PM

Well i got a huge set back...

Turns out this is a Gen IV AFM engine.

AFM...Active Fuel Management. (Can shut oil off on certain lifters to kill cylinders).

and you cant make a stand alone harness for them and nothing will work, so ill have to find another.... super yay, not thrilled

bjcaldwe · 08-27-2012, 10:34 PM

Well that sucks. At least the motor mounts are ready to plop one in though.

**scotts62** · 08-27-2012, 10:35 PM

Yeah but really sucks though.. not sure what im going to do with it now. Boat weight

bjcaldwe · 08-27-2012, 10:41 PM

maybe G and R will swap ya lol

Alan's Classic · 08-27-2012, 10:42 PM

Ouch!! Look at it this way, your lesson learned could really help someone here.

mcbassin · 08-27-2012, 10:54 PM

Oh man, I never knew that about those engines. Hope you can swap it for one that will work for you.
Posted via Mobile Device

**scotts62** · 08-27-2012, 10:54 PM

Quote:

Originally Posted by Alan's Classic

Ouch!! Look at it this way, your lesson learned could really help someone here.

Good point, its like ky to my ears and it feels much better now

bjcaldwe · 08-27-2012, 11:13 PM

You have been full of useful sayings lately. lol

Alan's Classic · 08-28-2012, 12:23 AM

Quote:

Originally Posted by scotts62

Good point, its like ky to my ears and it feels much better now

Posted via Mobile Device

kikkegek · 08-28-2012, 06:56 AM

damn dude!

08-22-2012, 09:50 PM	#826
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: project 62 Havent checked in with your project in awhile. Glad your still chipping away at it..

08-24-2012, 08:47 PM	#827
Solo2002 Registered User Join Date: Aug 2012 Location: Bibb CO.Alabama Posts: 321	Re: project 62 You got a killer truck man love it Posted via Mobile Device

08-24-2012, 09:44 PM	#828
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Thanks guys, coming along slowly. __________________ Scott 93 crew cab build Project 62

08-24-2012, 10:22 PM	#829
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Well i started the rats nest the other night. I found a pile of wires under all of the insulation and tape! This was after the wires not needed from the ECM were removed. I am using the harness as a stand alone (just engine harness and wired into a fuse block) and this is after the C2 connector was cut off and labeled. __________________ Scott 93 crew cab build Project 62

08-25-2012, 09:38 AM	#830
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project 62 Nice progress on the harness Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-25-2012, 10:42 AM	#831
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: project 62 Let the fun begin.. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-25-2012, 12:38 PM	#833
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 are you kidding, im having a hard enough time to get it together with a stock body __________________ Scott 93 crew cab build Project 62

08-25-2012, 08:44 PM	#834
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Rack and Pinion mocked up, frame and cross member notched. Pics soon __________________ Scott 93 crew cab build Project 62

08-26-2012, 10:08 PM	#839
Solo2002 Registered User Join Date: Aug 2012 Location: Bibb CO.Alabama Posts: 321	Re: project 62 amazing. I hear ya on the trailer queen why spend that much time and cash if you can't enjoy it for what it's build for to drive and show off. Posted via Mobile Device __________________ 1966 C10 short stepper KMHK

08-26-2012, 10:49 PM	#840
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Exactly!! Expensive tires are meant to get worn out __________________ Scott 93 crew cab build Project 62

08-27-2012, 10:20 PM	#841
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Well i got a huge set back... Turns out this is a Gen IV AFM engine. AFM...Active Fuel Management. (Can shut oil off on certain lifters to kill cylinders). and you cant make a stand alone harness for them and nothing will work, so ill have to find another.... super yay, not thrilled __________________ Scott 93 crew cab build Project 62

08-27-2012, 10:34 PM	#842
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: project 62 Well that sucks. At least the motor mounts are ready to plop one in though. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

08-27-2012, 10:35 PM	#843
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Yeah but really sucks though.. not sure what im going to do with it now. Boat weight __________________ Scott 93 crew cab build Project 62

08-27-2012, 10:41 PM	#844
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: project 62 maybe G and R will swap ya lol __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

08-27-2012, 10:42 PM	#845
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: project 62 Ouch!! Look at it this way, your lesson learned could really help someone here. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"



Register or Log In To remove these advertisements.

08-27-2012, 10:54 PM	#846
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project 62 Oh man, I never knew that about those engines. Hope you can swap it for one that will work for you. Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-27-2012, 11:13 PM	#848
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: project 62 You have been full of useful sayings lately. lol __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

08-28-2012, 06:56 AM	#850
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: project 62 damn dude! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.