project 62 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**scotts62** · 12-06-2008, 06:19 PM

Well i finally rounded up enough pics for a halfway decent build thread so here they are.

Frame

**scotts62** · 12-06-2008, 06:22 PM

More

**scotts62** · 12-06-2008, 06:26 PM

Ya some more..

Its a little farther but these are the most recent, there will also be another tank on the other side of the fuel tank but its not cut out yet.

joe231 · 12-06-2008, 06:45 PM

cool man!
now you need to get that camaro done and get busy on the '62 again!
....like i have room to talk

TimE · 12-06-2008, 07:20 PM

All I wanna know is where are ya gonna haul stuff at?

j/k Scott. It's coming together nicely.

Keep us updated on pics!!! You know Joe will bug you if you don't!

On a serious note, when you get the frame finished will the front crossmember/LCA's be on the ground aired out? Or are you going to set it up with a "safety factor" just in case? Also diggin that 9". Can't wait to see it in person next summer.

**scotts62** · 12-06-2008, 07:39 PM

Thanks Joe, actually about to try and start the ol camaro here in a bit, so if you hear a loud boom at your house you know what it was

Thanks Tim, ya the only hauling in this one after its done will be foldup chairs

CA's are sitting on the ground now might make a oh cheeit safty for it up front but ill get to that when it gets a little closer. Ya it should be lot farther by the time you swing out next summer, now that i said that Joe will hold me to it so i had better huh

neto · 12-06-2008, 08:03 PM

I like what you are doing with your center counsel. That's how I'm doing my 63.

joe231 · 12-06-2008, 08:06 PM

1966gmc · 12-06-2008, 08:08 PM

Is that a fiberglass tilt front end I see?

joe231 · 12-06-2008, 08:22 PM

Quote:

Originally Posted by 1966gmc

Is that a fiberglass tilt front end I see?

yep

sorry scott, i'm taking the liberty to answer questions for ya

1966gmc · 12-06-2008, 08:23 PM

*drools
I found one of them on a site about a year or so ago and cannot find it now. What a great way to be different and get rid of a metric ton of weight. Looks good man

joe231 · 12-06-2008, 08:25 PM

yeah and not to mention get rid of those dirt and moisture trapping fenders

**scotts62** · 12-06-2008, 08:26 PM

Quote:

Originally Posted by 1966gmc

*drools
I found one of them on a site about a year or so ago and cannot find it now. What a great way to be different and get rid of a metric ton of weight. Looks good man

Thanks man! Ya im guessing but it probably took 300lbs off it, heck the stock hood weighs a ton by itself

No problem Joe

**scotts62** · 12-06-2008, 08:29 PM

Quote:

Originally Posted by joe231

yeah and not to mention get rid of those dirt and moisture trapping fenders

you stepped in what...?

What you dont like my bare metal fenders....

Whe i get hood mounted im going to primer it all anyway, as long as it doesnt rain too hard in the garage its ok

they have been like that for a year

**scotts62** · 12-06-2008, 08:33 PM

Quote:

Originally Posted by neto

I like what you are doing with your center counsel. That's how I'm doing my 63.

Thanks! Thats cool, you have any pics?

98L150 · 12-06-2008, 08:33 PM

looking good

**scotts62** · 12-06-2008, 08:34 PM

Quote:

Originally Posted by 98L150

looking good

Thank you.

joe231 · 12-06-2008, 08:35 PM

naw, i was talking about the stock front fenders that catch all the road debris and rot out....you don't have that problem with glass

1966gmc · 12-06-2008, 08:36 PM

Quote:

Originally Posted by scotts62

Thanks man! Ya im guessing but it probably took 300lbs off it, heck the stock hood weighs a ton by itself

Ha, you ain't tellin me nothing. Last winter when I re-installed my engine, one of my hinges decided to tweak and wouldn't shut. I removed them to install new ones and almost got killed by that titanic sized hood. Good times

**scotts62** · 12-06-2008, 09:01 PM

Quote:

Originally Posted by joe231

naw, i was talking about the stock front fenders that catch all the road debris and rot out....you don't have that problem with glass

My bad

Very true

**scotts62** · 12-06-2008, 09:04 PM

Quote:

Originally Posted by 1966gmc

Ha, you ain't tellin me nothing. Last winter when I re-installed my engine, one of my hinges decided to tweak and wouldn't shut. I removed them to install new ones and almost got killed by that titanic sized hood. Good times

Ya they are nothing to mess with when your by yourself, they will win

tiggamonsta · 12-06-2008, 11:30 PM

nice truck.

72BlckButy · 12-06-2008, 11:32 PM

Great looking build, that is going to be one sweet truck when it's done.

Good luck with finishing it up!

leftcoast66 · 12-07-2008, 02:49 AM

Quote:

Originally Posted by scotts62

Ya they are nothing to mess with when your by yourself, they will win

True story, been there done that, my dad got a great laugh too while watching.

Always seen it in your sig, and now we see the details. Looks like one heck of a project, and an awesome setup.

Bazooka · 12-07-2008, 03:14 AM

Coooool man....... Goodluck with it

12-06-2008, 06:19 PM	#1
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	project 62 Well i finally rounded up enough pics for a halfway decent build thread so here they are. Frame __________________ Scott 93 crew cab build Project 62

12-06-2008, 06:22 PM	#2
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 More __________________ Scott 93 crew cab build Project 62

12-06-2008, 06:26 PM	#3
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Ya some more.. Its a little farther but these are the most recent, there will also be another tank on the other side of the fuel tank but its not cut out yet. __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 12-06-2008 at 07:47 PM. Reason: Added stuff

12-06-2008, 06:45 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: project 62 cool man! now you need to get that camaro done and get busy on the '62 again! ....like i have room to talk __________________ *CHEVY ONLY* Last edited by joe231; 12-06-2008 at 06:45 PM.

12-06-2008, 07:20 PM	#5
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: project 62 All I wanna know is where are ya gonna haul stuff at? j/k Scott. It's coming together nicely. Keep us updated on pics!!! You know Joe will bug you if you don't! On a serious note, when you get the frame finished will the front crossmember/LCA's be on the ground aired out? Or are you going to set it up with a "safety factor" just in case? Also diggin that 9". Can't wait to see it in person next summer.

12-06-2008, 07:39 PM	#6
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Thanks Joe, actually about to try and start the ol camaro here in a bit, so if you hear a loud boom at your house you know what it was Thanks Tim, ya the only hauling in this one after its done will be foldup chairs CA's are sitting on the ground now might make a oh cheeit safty for it up front but ill get to that when it gets a little closer. Ya it should be lot farther by the time you swing out next summer, now that i said that Joe will hold me to it so i had better huh __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 12-06-2008 at 07:40 PM.

12-06-2008, 08:03 PM	#7
neto Registered User Join Date: Jan 2007 Location: Madera, California Posts: 291	Re: project 62 I like what you are doing with your center counsel. That's how I'm doing my 63.

12-06-2008, 08:06 PM	#8
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: project 62 __________________ *CHEVY ONLY*

12-06-2008, 08:08 PM	#9
1966gmc Why does it taste purple? Join Date: Sep 2007 Location: Cambridge Md Posts: 621	Re: project 62 Is that a fiberglass tilt front end I see?

12-06-2008, 08:23 PM	#11
1966gmc Why does it taste purple? Join Date: Sep 2007 Location: Cambridge Md Posts: 621	Re: project 62 *drools I found one of them on a site about a year or so ago and cannot find it now. What a great way to be different and get rid of a metric ton of weight. Looks good man

12-06-2008, 08:25 PM	#12
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: project 62 yeah and not to mention get rid of those dirt and moisture trapping fenders __________________ *CHEVY ONLY*

12-06-2008, 08:33 PM	#16
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: project 62 looking good __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

12-06-2008, 08:35 PM	#18
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: project 62 naw, i was talking about the stock front fenders that catch all the road debris and rot out....you don't have that problem with glass __________________ *CHEVY ONLY*

12-06-2008, 11:30 PM	#22
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: project 62 nice truck.

12-06-2008, 11:32 PM	#23
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: project 62 Great looking build, that is going to be one sweet truck when it's done. Good luck with finishing it up! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)



Register or Log In To remove these advertisements.

12-07-2008, 03:14 AM	#25
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: project 62 Coooool man....... Goodluck with it

Register or Log In To remove these advertisements.