Header Solution

[Jokers69]

The upper frame rails are about 1.5" wider than later year trucks. Also the brake lines run inside the frame instead of on the outside. We should be fitting them on a 70 BB truck this week to make sure they will work with pre 72 motor stands. Stainless may be ready by mid summer.

[67chevemall]

Originally Posted by Jokers69

You have great plug access.You can run straight boot spark plug wires on all cylinders but #6 it requires a 90 degree boot.

Ahhh # 6 There has been a few swear words directed at #6 over the years...

Sweet job on the headers.

[70k52wd]

Did you ever get the sbc headers with factory a/c flange, ball mount collector? Prices? Thanks.

[70stroker]

ordered some of these today. cant wait to recieve them. Ill post when i recieve.

Steve is a very friendly guy. Prompt on callin me back as promised.

[AJs72K5]

Gonna bump this back up. Have the BBC's been test fit on a 4x4? How's the clearance on the front shackles, front driveshaft, and transfer case?

[umwtnt]

Subscribed for future reference

[Jokers69]

We have not found a BB 4x4 to test fit them on ( looking for one as we speak)

[Jokers69]

Originally Posted by 70k52wd

Did you ever get the sbc headers with factory a/c flange, ball mount collector? Prices? Thanks.

We have not got an a/c bracket to replace the factory one for our headers yet.

[AJs72K5]

Originally Posted by Jokers69

We have not found a BB 4x4 to test fit them on ( looking for one as we speak)

What's the word? Anything?

[Jokers69]

Still looking for local stock 4x4 BB truck. Every truck I've found is to modified.

[70stroker]

if there is any local to the se kansas area i would be more then welcome to let them try my headers i bought from jokers on a bbc 4x4 truck before i install on my 2wd (its going to be a few months anyhow)

[Jeffs70]

awesome setup of headers it looks like.

[Willys47]

We should be fitting them on a 70 BB truck this week to make sure they will work with pre 72 motor stands. Stainless may be ready by mid summer.
So how did the test fit work out any did you take any pictures?

[70stroker]

These headers fit amazing on a 2wd bbc truck on pre 72 stands. I just installed mine heres a few pics.

[Jokers69]

Thanks For the pics Stoker.

[Dan 67 Chevy LWB]

Anything on the Stainless BBC headers yet?

[Jokers69]

We should be able to do BB stainless in about two weeks.

[Hart_Rod]

Do you have any pictures of the small block header in stainless and powdercoating that are mounted? I have 383 with a vortech supercharger (631 TQ/622 HP http://67-72chevytrucks.com/vboard/s...d.php?t=370973), do you think these will help or harm performance? I currently have long tubes with 1 5/8.

[Jokers69]

I will try and see if I have pics of stainless in installed. I do have pics of coated installed and i will post asap. As for performance if you are running 1 5/8 primaries headers with a supercharger you should gain sum hp on the top end with 1 3/4.

[Clear Image (Dan)]

Hello everyone. I would like to introduce myself. My name is Dan Ferraro. I am the owner of Clear Image Automotive. I have been in business for over 10 years now. We specialize in GM vehicles and have been designing and building headers and exhaust components for specific vehicles. Our origin started with the 94 – 96 Impala SS. From there we branched off to the Chevy Cobalt, Saturn Ion, Pontiac Solstice, Camaro/Firebird, as well as the Corvette. Recently we have released products for the Chevy Colorado and GMC Canyon as well as the early Chevy trucks. We also build private label products for other companies in various other markets.
I have not posted to this forum before as I have left marketing of our products to one of your own. Our headers have been sold by Steve Kinney of Carb’s Unlimited & Performance. He posts here as “Jokers69” and is obviously the originator of this specific thread. I’m sure some of you are familiar with him as you have already received and installed our headers. Steve and I have discussed the advertisement possibilities on this forum and he has become a gold vendor. Recently another one of your members, “67-72trucks” posted a thread to try and drum up interest in our headers.
http://67-72chevytrucks.com/vboard/s...d.php?t=410104

He contacted me about “group pricing”. I explained what my requirements were but I failed to explain my relationship with Steve. Many of you have been wondering what happened, why Steve isn’t posting the sale, etc. The “GP” thread was posted specifically so I could see how much interest there actually is. Since Steve is one of my vendors, and he is also the owner of the shop next door, he will be handling the actual sale on this forum.

At this time I do not own a truck and am not capable of answering specific fitment and application questions. This is exactly the reason I am letting Steve do the marketing on this forum. I will continue to remain a member of this forum and will be here to support Steve and answer specific questions about our products; material, design, primary sizes, collector sizes, construction, finish work, etc.

I would like to thank “67-72trucks” for being so enthusiastic and for posting information and answers to many question about our products. I will work on the sale prices and we will the information for all of you tomorrow. Steve will post a new thread entitled “Header Group Purchase”.

I apologize for any misunderstanding. If anyone has any questions about our headers, exhaust systems, mandrel bending, etc, please feel free to ask.
Thanks all.

Warmest Regards,
Dan Ferraro
Clear Image Automotive
Custom headers, exhaust & intake systems
http://www.clearimageautomotive.com/
(425)251-0329

[Jokers69]

BB headers are now available in stainless 304 with v-band outlets on collectors. $1095.00

[Dan 67 Chevy LWB]

Originally Posted by Jokers69

BB headers are now available in stainless 304 with v-band outlets on collectors. $1095.00

What size V-band? What size ID"? do you have photos off the v-band and does it come with the clamp and other half?

[Jokers69]

I will post pics of v-band setup asap. It will come with both sides and a clamp.

[Hart_Rod]

Originally Posted by Jokers69

I will post pics of v-band setup asap. It will come with both sides and a clamp.

Any pictures yet?

[Jokers69]

No pics yet working on them now.