John's Project - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 07-15-2009, 11:54 AM

damn man, you got me all excited...then WHAM!!!

that wheel looks good, why didn't you go ahead and swap the column?

JohnC · 07-15-2009, 01:36 PM

Sorry man. PM sent.

I figured I would just wait until I messed with the interior. That and until I figured out what I will do with the wipers.

joe231 · 07-15-2009, 01:48 PM

so you said you would like something like the headlight switch to power your wipers.....
how about one from a 64-66 chevy truck, it is a 3 position switch that you turn off-low-high, even has a washer button in the middle

http://www.classicparts.com/1964-66-...ctinfo/67-648/

http://www.classicparts.com/1964-66-...ctinfo/29-115/

JohnC · 07-15-2009, 02:39 PM

Yep that's pretty much what I'm looking for. I just think it would be different, but still look like it was a factory thing. Not just stuck on there.

joe231 · 07-15-2009, 04:19 PM

I can probably get you a complete original next time I go to Stratford.

JohnC · 07-15-2009, 04:34 PM

That would be cool. No rush though. You see how I am progressing!

*TheSebring* · 07-15-2009, 05:21 PM

Quote:

Originally Posted by JohnC

I don't know. We are thinking of going with a dark metallic gray for the color of the truck. If we do that I'll probably go with a gray interior. If we stick with blue exterior, then I'll probably go with blue interior. Still haven't set that in stone yet.

How about blue with metallica gray interior? Just being a rabble rouser

. I dig the bed without the bars. Looking slick bro.

jgh64pkup · 07-15-2009, 07:06 PM

Quote:

Originally Posted by TheSebring

How about blue with metallica gray interior? Just being a rabble rouser

. I dig the bed without the bars. Looking slick bro.

i want that color maybe it can headbang while listening to metallica

joe231 · 07-15-2009, 08:46 PM

that would be a rocking paint job

*TheSebring* · 07-15-2009, 11:31 PM

JohnC · 07-16-2009, 07:52 AM

I wouldn't mind doing a Metallica paint! Their old stuff, not the new stuff though. It's just not the same!

*highperf4x4* · 07-16-2009, 11:50 PM

Quote:

Originally Posted by JohnC

Here also is a pic of the bed rails on, and then off. The bed rails aren't that bad, I just didn't want them on the truck.

What are you going to do with those bedrails?

JohnC · 07-17-2009, 07:51 AM

Sell them I guess. You interested?

bigbadjohn84 · 07-17-2009, 11:32 AM

jgh64pkup · 07-17-2009, 12:32 PM

travis you dont have anything thats a shortbed do you

*highperf4x4* · 07-17-2009, 12:41 PM

Quote:

Originally Posted by jgh64pkup

travis you dont have anything thats a shortbed do you

My father has a king cab shortbed and I have a long bed with a huge toolbox......... so. ........ I am interested

menace121978 · 07-17-2009, 04:30 PM

something funny i just thought of...
whenever i feel like going to a bar and b.s.ing with the guys i just come over to john's build thread and sit down.

lot of good laughs through this thread!!

joe231 · 07-17-2009, 04:43 PM

Quote:

Originally Posted by menace121978

something funny i just thought of...
whenever i feel like going to a bar and b.s.ing with the guys i just come over to john's build thread and sit down.

lot of good laughs through this thread!!

Menace, you should check out the Oklahoma section....it is chocked full of nuts

menace121978 · 07-17-2009, 05:11 PM

we'll do!

bigbadjohn84 · 07-17-2009, 07:30 PM

JohnC · 07-18-2009, 07:42 AM

Quote:

Originally Posted by menace121978

something funny i just thought of...
whenever i feel like going to a bar and b.s.ing with the guys i just come over to john's build thread and sit down.

lot of good laughs through this thread!!

I'm glad I can have a place where everyone can hang out and enjoy.

Stop by anytime, the insults are plentiful, and the jokes are free! Ya'll come back now ya hear!

JohnC · 07-18-2009, 07:43 AM

Quote:

Originally Posted by highperf4x4

My father has a king cab shortbed and I have a long bed with a huge toolbox......... so. ........ I am interested

PM sent!

Hey I have an update!!!!!!! Truck is now in garage! Don't know how much of an update it is, but it's something new! No pics though, I know, I know! Now I'll start getting the motor pulled, and the engine compartment cleaned up for the new motor.

menace121978 · 07-18-2009, 08:50 AM

Quote:

Originally Posted by JohnC

I'm glad I can have a place where everyone can hang out and enjoy.

Stop by anytime, the insults are plentiful, and the jokes are free! Ya'll come back now ya hear!

jason65 · 07-19-2009, 10:18 PM

Cool. You have just enuff time to get the front clip pulled and have pics posted for when we all get on-line tomorrow.

JohnC · 07-20-2009, 07:44 AM

I guess your new to the pace at which I work on my truck!

I think I have decided to leave the front clip on. I was considering it to do some more cleaning, and painting. However, I think I can do all I need with it on.

07-15-2009, 11:54 AM	#201
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: John's Project damn man, you got me all excited...then WHAM!!! that wheel looks good, why didn't you go ahead and swap the column? __________________ *CHEVY ONLY*

07-15-2009, 01:36 PM	#202
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project Sorry man. PM sent. I figured I would just wait until I messed with the interior. That and until I figured out what I will do with the wipers.

07-15-2009, 01:48 PM	#203
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: John's Project so you said you would like something like the headlight switch to power your wipers..... how about one from a 64-66 chevy truck, it is a 3 position switch that you turn off-low-high, even has a washer button in the middle http://www.classicparts.com/1964-66-...ctinfo/67-648/ http://www.classicparts.com/1964-66-...ctinfo/29-115/ __________________ *CHEVY ONLY* Last edited by joe231; 07-15-2009 at 01:48 PM.

07-15-2009, 02:39 PM	#204
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project Yep that's pretty much what I'm looking for. I just think it would be different, but still look like it was a factory thing. Not just stuck on there.

07-15-2009, 04:19 PM	#205
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: John's Project I can probably get you a complete original next time I go to Stratford. __________________ *CHEVY ONLY*

07-15-2009, 04:34 PM	#206
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project That would be cool. No rush though. You see how I am progressing!

07-15-2009, 08:46 PM	#209
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: John's Project that would be a rocking paint job __________________ *CHEVY ONLY* Last edited by joe231; 07-15-2009 at 08:46 PM.

07-15-2009, 11:31 PM	#210
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: John's Project

07-16-2009, 07:52 AM	#211
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project I wouldn't mind doing a Metallica paint! Their old stuff, not the new stuff though. It's just not the same!

07-17-2009, 07:51 AM	#213
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project Sell them I guess. You interested?

07-17-2009, 11:32 AM	#214
bigbadjohn84 Registered User Join Date: Feb 2008 Location: Florala, AL Posts: 398	Re: John's Project

07-17-2009, 12:32 PM	#215
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: John's Project travis you dont have anything thats a shortbed do you __________________ Gage 1967 C10 Shortbed Stepside

07-17-2009, 04:30 PM	#217
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: John's Project something funny i just thought of... whenever i feel like going to a bar and b.s.ing with the guys i just come over to john's build thread and sit down. lot of good laughs through this thread!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-17-2009, 05:11 PM	#219
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: John's Project we'll do! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-17-2009, 07:30 PM	#220
bigbadjohn84 Registered User Join Date: Feb 2008 Location: Florala, AL Posts: 398	Re: John's Project Last edited by bigbadjohn84; 07-17-2009 at 07:31 PM.



Register or Log In To remove these advertisements.

07-19-2009, 10:18 PM	#224
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: John's Project Cool. You have just enuff time to get the front clip pulled and have pics posted for when we all get on-line tomorrow.

07-20-2009, 07:44 AM	#225
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: John's Project I guess your new to the pace at which I work on my truck! I think I have decided to leave the front clip on. I was considering it to do some more cleaning, and painting. However, I think I can do all I need with it on.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.