My 1952 truck. - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevette · 03-15-2013, 09:43 AM

That looks great, Wade. Are you going to do the ceiling too? If you do, make sure you get a haircut and wear a goggles.

Good luck going forward.

SSABMUD · 03-15-2013, 08:23 PM

Quote:

Originally Posted by Chevette

That looks great, Wade. Are you going to do the ceiling too? If you do, make sure you get a haircut and wear a goggles.

Good luck going forward.

Um no, I will be buying an ABS unit and modifying it. Even I am not that crazy to try and fibreglass upside down.
Posted via Mobile Device

99 to Life · 03-15-2013, 09:14 PM

or check out atomiks build on here, he basically fiberglassed the top of the roof as a form for the interior. I think it worked for him.

Atommik · 03-15-2013, 10:25 PM

Here's my build page link (below). The fiberglass headliner pages start at entry # 164 on my thread. I haven't covered the headliner panel yet, (just finished painting the exterior), but I hope to pick an interior color and get going on it this summer.

SSABMUD · 03-16-2013, 10:18 AM

I did think of doing it the way Atommik did it. I have been following both of those builds. If I was smarter I would of used my new roof panel before it was on the truck. I don't want anything elaborate because with that dash, things can seem really "busy".
Posted via Mobile Device

nebdrummer · 05-25-2013, 09:09 AM

Where's the progress man! Lol
Posted via Mobile Device

SSABMUD · 06-28-2013, 11:58 AM

Quote:

Originally Posted by nebdrummer

Where's the progress man! Lol
Posted via Mobile Device

Well I got busy. Travelling, recovering from back again, starting another business yadda yadda. I am just getting ready to change the script on the tailgate and put in a new hood latch. Can't find my hinges. Your truck is looking awesome man.
Posted via Mobile Device

nebdrummer · 07-01-2013, 10:56 PM

Thanks! I wanna see this thing done!
Posted via Mobile Device

nebdrummer · 02-21-2014, 03:09 PM

Any updates?

fisherman420 · 12-09-2014, 02:46 AM

Any updates on your killer truck? I know its sledding season for us

as my 50 pickup project will come to a halt now too but a few pics if any would be great!

SSABMUD · 03-05-2015, 01:36 PM

In case anybody has been wondering, I am still alive. I have taken a break from my truck for a long time. Bought a bus and toured around the great US of A. Looking around for my final nesting place. As I write this in sitting in Arizona catching up on project I have been following. Some awesome work out the people. I haves lot of travelling to do this year again but the good news is I am motivated to start working on my truck again. We will see how it goes.

SSABMUD · 03-05-2015, 01:42 PM

I did restore a couple bikes I had. Guess I needed to step away from the truck for a little while.

SSABMUD · 03-05-2015, 01:50 PM

Bikes were not as easy as I thought to do.

SSABMUD · 03-05-2015, 01:51 PM

Last one next ones will be of work done on truck.

Root2812 · 03-05-2015, 11:55 PM

I like those Honda Dream's. That is a Dream isn't it? I'd like to pick one up for my wife.

99 to Life · 03-05-2015, 11:58 PM

glad to see you back in the saddle. nice work on the bikes.

SSABMUD · 03-06-2015, 12:31 AM

Quote:

Originally Posted by Root2812

I like those Honda Dream's. That is a Dream isn't it? I'd like to pick one up for my wife.

Yeah it's a 1966 Dream 305. Same year as me.

SSABMUD · 03-14-2015, 09:47 PM

Well now that ride height and bumpers are all on, it is soon time to come apart again. Few things to do before I take it apart though. Fabricate a tunnel under passenger inner fender for AC/heater hoses, hook up shifter cable, trans dipstick, figure out battery location, fuel pump location, throttle cable.....oh boy. Truck has a static suspension and needs to come down another inch or so.

SSABMUD · 03-14-2015, 09:52 PM

Why are my pictures sideways? I had no problems before. Maybe because I had my phone sideways when I took it? Got my fuel filler figured out today. I wanted it centered near the rear. I am changing that cap as I hate it. Took the wood out a final time.

SSABMUD · 03-14-2015, 09:54 PM

Need to fit some shocks in here.

SSABMUD · 03-14-2015, 09:58 PM

Shock mounting is supposed to be on rear of lower arms but it's tight back there.

SSABMUD · 03-14-2015, 09:59 PM

OMG, this photo thing is ticking me off. Been too long since I posted I guess.

SSABMUD · 03-14-2015, 10:05 PM

Hope my buddy likes the look of the back of my truck. He figures his AMG 550 is gonna hand me my a--. Not if I can hook it up. I don't think....

windows · 03-14-2015, 10:41 PM

Your truck is so fine. One of the best AD's I have ever seen. Perfect combination of class and cool. Keep up the great work.

SSABMUD · 03-14-2015, 10:55 PM

Wow! Thanks Windows. It's been so long since I touched it I was getting worried it was outdated already.

03-15-2013, 09:43 AM	#201
Chevette Registered User Join Date: Nov 2011 Location: Langley, BC Posts: 702	Re: My 1952 truck. That looks great, Wade. Are you going to do the ceiling too? If you do, make sure you get a haircut and wear a goggles. Good luck going forward. __________________ 56 Chevy PU http://67-72chevytrucks.com/vboard/s...d.php?t=531955 Question: Know how to sell your truck for $50,000? Answer: Spend $100,000 building it.

03-15-2013, 09:14 PM	#203
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 1952 truck. or check out atomiks build on here, he basically fiberglassed the top of the roof as a form for the interior. I think it worked for him. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

03-15-2013, 10:25 PM	#204
Atommik Registered User Join Date: Sep 2011 Location: Golden Valley,MN Posts: 639	Re: My 1952 truck. Here's my build page link (below). The fiberglass headliner pages start at entry # 164 on my thread. I haven't covered the headliner panel yet, (just finished painting the exterior), but I hope to pick an interior color and get going on it this summer. __________________ My build http://67-72chevytrucks.com/vboard/s...d.php?t=495795

03-16-2013, 10:18 AM	#205
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. I did think of doing it the way Atommik did it. I have been following both of those builds. If I was smarter I would of used my new roof panel before it was on the truck. I don't want anything elaborate because with that dash, things can seem really "busy". Posted via Mobile Device __________________ Wade

05-25-2013, 09:09 AM	#206
nebdrummer Registered User Join Date: Dec 2008 Location: Nebraska Posts: 390	Re: My 1952 truck. Where's the progress man! Lol Posted via Mobile Device __________________ 1950 3600. 370cid, th400, 9", billet 80mm turbo under the bed, 4 link coilovers, hoping for a single digit! http://67-72chevytrucks.com/vboard/s...d.php?t=380212

07-01-2013, 10:56 PM	#208
nebdrummer Registered User Join Date: Dec 2008 Location: Nebraska Posts: 390	Re: My 1952 truck. Thanks! I wanna see this thing done! Posted via Mobile Device __________________ 1950 3600. 370cid, th400, 9", billet 80mm turbo under the bed, 4 link coilovers, hoping for a single digit! http://67-72chevytrucks.com/vboard/s...d.php?t=380212

02-21-2014, 03:09 PM	#209
nebdrummer Registered User Join Date: Dec 2008 Location: Nebraska Posts: 390	Re: My 1952 truck. Any updates? __________________ 1950 3600. 370cid, th400, 9", billet 80mm turbo under the bed, 4 link coilovers, hoping for a single digit! http://67-72chevytrucks.com/vboard/s...d.php?t=380212

12-09-2014, 02:46 AM	#210
fisherman420 Registered User Join Date: Jul 2014 Location: Alberta Canada Posts: 93	Re: My 1952 truck. Any updates on your killer truck? I know its sledding season for us as my 50 pickup project will come to a halt now too but a few pics if any would be great!

03-05-2015, 01:36 PM	#211
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. In case anybody has been wondering, I am still alive. I have taken a break from my truck for a long time. Bought a bus and toured around the great US of A. Looking around for my final nesting place. As I write this in sitting in Arizona catching up on project I have been following. Some awesome work out the people. I haves lot of travelling to do this year again but the good news is I am motivated to start working on my truck again. We will see how it goes. Attached Images __________________ Wade

03-05-2015, 01:42 PM	#212
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. I did restore a couple bikes I had. Guess I needed to step away from the truck for a little while. Attached Images __________________ Wade

03-05-2015, 01:50 PM	#213
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. Bikes were not as easy as I thought to do. Attached Images __________________ Wade

03-05-2015, 01:51 PM	#214
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. Last one next ones will be of work done on truck. Attached Images __________________ Wade

03-05-2015, 11:55 PM	#215
Root2812 Registered User Join Date: Aug 2011 Location: Barnum, Mn Posts: 795	Re: My 1952 truck. I like those Honda Dream's. That is a Dream isn't it? I'd like to pick one up for my wife. __________________ My 1950 Chevy build

03-05-2015, 11:58 PM	#216
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 1952 truck. glad to see you back in the saddle. nice work on the bikes. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

03-14-2015, 09:47 PM	#218
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. Well now that ride height and bumpers are all on, it is soon time to come apart again. Few things to do before I take it apart though. Fabricate a tunnel under passenger inner fender for AC/heater hoses, hook up shifter cable, trans dipstick, figure out battery location, fuel pump location, throttle cable.....oh boy. Truck has a static suspension and needs to come down another inch or so. Attached Images __________________ Wade



Register or Log In To remove these advertisements.

03-14-2015, 09:52 PM	#219
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. Why are my pictures sideways? I had no problems before. Maybe because I had my phone sideways when I took it? Got my fuel filler figured out today. I wanted it centered near the rear. I am changing that cap as I hate it. Took the wood out a final time. Attached Images __________________ Wade

03-14-2015, 09:54 PM	#220
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. Need to fit some shocks in here. Attached Images __________________ Wade

03-14-2015, 09:58 PM	#221
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. Shock mounting is supposed to be on rear of lower arms but it's tight back there. Attached Images __________________ Wade

03-14-2015, 09:59 PM	#222
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. OMG, this photo thing is ticking me off. Been too long since I posted I guess. __________________ Wade

03-14-2015, 10:05 PM	#223
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. Hope my buddy likes the look of the back of my truck. He figures his AMG 550 is gonna hand me my a--. Not if I can hook it up. I don't think.... Attached Images __________________ Wade

03-14-2015, 10:41 PM	#224
windows Registered User Join Date: Nov 2014 Location: birch bay, washington Posts: 4	Re: My 1952 truck. Your truck is so fine. One of the best AD's I have ever seen. Perfect combination of class and cool. Keep up the great work.

03-14-2015, 10:55 PM	#225
SSABMUD Registered User Join Date: Jul 2011 Location: Red Deer, Alberta Canada Posts: 336	Re: My 1952 truck. Wow! Thanks Windows. It's been so long since I touched it I was getting worried it was outdated already. __________________ Wade

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.