Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ante_up13 · 10-18-2007, 10:44 PM

I have a pair of used 1" drop springs from ECE. They were on my truck for two years until I replaced them with stock ones. They look new except for a little road grime. My price is $50...buyer pays shipping. Thanks for lookin'.

suville · 10-18-2007, 11:26 PM

shipping to 83647 Thanks

ante_up13 · 10-18-2007, 11:36 PM

Quote:

Originally Posted by suville

shipping to 83647 Thanks

Fed Ex Ground $14.63

Here is the weight and box dimesions in case you want to go with another shipper(ie UPS, USPS)

Shipping weight @30lbs
Approx Box Dimesions 15"x12"x7"

My Zip 92620

Dylan

ante_up13 · 10-18-2007, 11:40 PM

These coil springs are for the front end and are meant for a small block application.

svgould · 10-19-2007, 12:45 AM

Put me next in line please. Shane

brak · 10-19-2007, 03:49 AM

Mee Three

zip: 55438

70c10 · 10-19-2007, 07:24 AM

ante up13- I don't need springs but could you measure the spring height while placed on a flat surface?. I'm curious how tall a 1" drop spring is. Thanks!

64GMCHorsepower · 10-19-2007, 10:10 AM

IF they get to me, shipping to 35806...but I will take them if I get the chance...

Chad

ante_up13 · 10-19-2007, 01:55 PM

Quote:

Originally Posted by 70c10

ante up13- I don't need springs but could you measure the spring height while placed on a flat surface?. I'm curious how tall a 1" drop spring is. Thanks!

I measured it sitting upside down because the spring is not level right side up. The measurement I got was 11 and 11/12 inches...just a hair under a foot...that is from the top of the coil to the tip of the bottom where the coil ends.

Hope it helps

If I don't here from suville soon (48hrs)...it will go to next in line

suville · 10-19-2007, 10:59 PM

I'll pass, Thanks

70c10 · 10-19-2007, 11:06 PM

Quote:

Originally Posted by ante_up13

I measured it sitting upside down because the spring is not level right side up. The measurement I got was 11 and 11/12 inches...just a hair under a foot...that is from the top of the coil to the tip of the bottom where the coil ends.

Hope it helps

Thanks for the info!

svgould · 10-20-2007, 12:00 AM

I think I'm next in line, and I will take them. My zip code is 83642. PM me with total and how to make payment.

Thanks,

Shane

ante_up13 · 10-20-2007, 11:34 PM

Quote:

Originally Posted by svgould

I think I'm next in line, and I will take them. My zip code is 83642. PM me with total and how to make payment.

Thanks,

Shane

Shane,

You are next...PM with info will be sent ASAP

Dylan

10-18-2007, 10:44 PM	#1
ante_up13 Registered User Join Date: May 2004 Location: Here Posts: 167	Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H I have a pair of used 1" drop springs from ECE. They were on my truck for two years until I replaced them with stock ones. They look new except for a little road grime. My price is $50...buyer pays shipping. Thanks for lookin'. Attached Images

10-18-2007, 11:26 PM	#2
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H shipping to 83647 Thanks

10-18-2007, 11:40 PM	#4
ante_up13 Registered User Join Date: May 2004 Location: Here Posts: 167	Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H These coil springs are for the front end and are meant for a small block application.

10-19-2007, 12:45 AM	#5
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H Put me next in line please. Shane __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

10-19-2007, 03:49 AM	#6
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H Mee Three zip: 55438 __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

10-19-2007, 07:24 AM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H ante up13- I don't need springs but could you measure the spring height while placed on a flat surface?. I'm curious how tall a 1" drop spring is. Thanks! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-19-2007, 10:10 AM	#8
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H IF they get to me, shipping to 35806...but I will take them if I get the chance... Chad __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

10-19-2007, 10:59 PM	#10
suville Registered User Join Date: Jun 2003 Location: Mtn. Home, Idaho Posts: 906	Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H I'll pass, Thanks

10-20-2007, 12:00 AM	#12
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: Used ECE 1" Drop Coil Springs Irvine, CA $50 plus S/H I think I'm next in line, and I will take them. My zip code is 83642. PM me with total and how to make payment. Thanks, Shane __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system Last edited by svgould; 10-20-2007 at 12:02 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.