cntr arm bush - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rci2990 · 11-02-2008, 06:27 PM

is there anyplace that sells just the stock front a arm bushings.most of the auto part stores sell the shafts and the bushings as a kit.the reason being i've already pc the shafts and only need the bushings.thx.

DB Smith · 11-02-2008, 06:33 PM

I was able to find them someplace, but it ended up being the same price or cheaper to buy the preassembled shaft with bushings installed from americanclassic.com.

I'll do some searching and see if I can find them again.

rci2990 · 11-09-2008, 12:04 AM

got upper and lowers all 4 for 160 from tim christian.

79gmcsierragrande · 11-09-2008, 11:29 PM

I bought these from here http://www.energysuspensionparts.com...s.asp?cat=2330

**N2TRUX** · 11-13-2008, 10:01 AM

Quote:

Originally Posted by rci2990

got upper and lowers all 4 for 160 from tim christian.

Another great deal from a forum vendor...

ulakovic22 · 11-13-2008, 12:19 PM

Are you talking about just the little rubber seals that go on the shafts? If so then LMC has them for like $3.00 a piece. No place local had them, but I never checked with NAPA.

rci2990 · 11-16-2008, 05:56 PM

no the whole thing

11-02-2008, 06:27 PM	#1
rci2990 Registered User Join Date: Jun 2005 Location: sunbury,pa Posts: 48	cntr arm bush is there anyplace that sells just the stock front a arm bushings.most of the auto part stores sell the shafts and the bushings as a kit.the reason being i've already pc the shafts and only need the bushings.thx. __________________ 1970 c-10 2wd longbed

11-02-2008, 06:33 PM	#2
DB Smith Old Shovel Rider Join Date: Oct 2007 Location: Rain City, WA. Posts: 117	Re: cntr arm bush I was able to find them someplace, but it ended up being the same price or cheaper to buy the preassembled shaft with bushings installed from americanclassic.com. I'll do some searching and see if I can find them again. __________________ Daryl.... *'68 C/10 Stepside* *2007 Build Page* *DS Originals* *Old Bikers.US*

11-09-2008, 12:04 AM	#3
rci2990 Registered User Join Date: Jun 2005 Location: sunbury,pa Posts: 48	Re: cntr arm bush got upper and lowers all 4 for 160 from tim christian. __________________ 1970 c-10 2wd longbed

11-09-2008, 11:29 PM	#4
79gmcsierragrande Manual Transmission Club Join Date: May 2008 Location: Grand Junction CO Posts: 292	Re: cntr arm bush I bought these from here http://www.energysuspensionparts.com...s.asp?cat=2330 __________________ 79 GMC Sierra Grande, SWB, Heavy Half If I wanted easy I would just buy a NEW truck!

11-13-2008, 12:19 PM	#6
ulakovic22 Registered User Join Date: Aug 2008 Location: Lantana, TX Posts: 419	Re: cntr arm bush Are you talking about just the little rubber seals that go on the shafts? If so then LMC has them for like $3.00 a piece. No place local had them, but I never checked with NAPA.

11-16-2008, 05:56 PM	#7
rci2990 Registered User Join Date: Jun 2005 Location: sunbury,pa Posts: 48	Re: cntr arm bush no the whole thing __________________ 1970 c-10 2wd longbed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.