My 68 stepside build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10NEWGUY · 08-04-2009, 01:33 PM

well to start off i bought this on ebay for 830 bucks. Title says its a 69 but I think it is mistitled. yes the vin matches the title. it has a hand operated ebrake and grille is a 68. anyway here it is as i bought it for 830. pics are straight from the ebay auction.

C10NEWGUY · 08-04-2009, 01:35 PM

i drove the inline 6 up on the trailer. it has a 4 speed manual but started life as a 3 on the tree

C10NEWGUY · 08-04-2009, 01:39 PM

rust in the rocker panels and the bottom of the passenger core support.

C10NEWGUY · 08-04-2009, 01:42 PM

already picked up a new passenger fender as the one on truck was attacked by a bb gun LOL and a new driver rocker

C10NEWGUY · 08-04-2009, 01:44 PM

check out the crack in the exhaust manifold. also the 4 speed didnt have a housing cover on it.

C10NEWGUY · 08-04-2009, 01:52 PM

gutted the inside and pulled the bed (sanded and spray painted the frame temp to stop rust) which had a sheet of osb in it. After pulling the osb i found this...

72BlckButy · 08-04-2009, 02:10 PM

Great looking build, good luck with it! And it looks like money well spent...

What are your plans for it?

my67chevytruck · 08-04-2009, 03:14 PM

looks like you got into right, and are making leaps and bounds already...
good luck with your build!

Heath

C10NEWGUY · 08-04-2009, 07:14 PM

Quote:

Originally Posted by 72BlckButy

What are your plans for it?

going the resto-mod way...I really wanted a fleet side short bed but im happy with it.

C10NEWGUY · 08-13-2009, 09:32 AM

well latest progress is I gutted the bed rails and trashed em they was just too far gone with cancer when repop are like 100 bucks a set. Also started to pull the drive trail to clean up the bay and paint. Also ditched the exhaust manifold with the crack on the ear and getting the flowtech part#11510 headers from jegs.

C10NEWGUY · 09-11-2009, 11:38 PM

Got a question guys...what is a good place for a replacement oil pan for the 250 inline?

C10NEWGUY · 12-16-2009, 02:15 AM

Update!

Will get pics up soon but as of today....

replaced all 4 wheel cylinders
replaced front/rear brake shoes
replaced hydraulic brake hoses front/rear
pulled heater core and shaved firewall
shaved third brake light
installed new front shocks
cut one coil from front coils
installed 6" drop rear coils
installed new adjustable rear track bar
driver rocker panel install is complete
fixed passenger rocker rust
USED OEM core support with no rust installed
repop passenger side fender

I still need info on an oil pan for an inline six???? Is it the same pan as a small block? My pan is shot and leaks like crazy!

C10NEWGUY · 02-23-2010, 11:07 PM

Well the chassis is pretty much done and the inline is getting rebuilt as I type this. The block will now be .040 over. I rebuilt the 4 speed as well. I will get some pics up soon.

culp7 · 02-24-2010, 11:46 PM

Quote:

Originally Posted by C10NEWGUY

Got a question guys...what is a good place for a replacement oil pan for the 250 inline?

local junkyard?

C10NEWGUY · 08-24-2010, 11:11 AM

I got the inline 6 back awhile ago and have put it back in the truck. The truck is now in the stages of getting into primer.

C10NEWGUY · 12-06-2010, 07:40 PM

Not on here too much but I have made leaps and bounds as of the past few months....See pics

**kev2809** · 12-06-2010, 08:38 PM

nice progress..

did you do the firewall and frame with the motor and cab on it?

C10NEWGUY · 12-06-2010, 10:13 PM

Quote:

Originally Posted by kev2809

nice progress..

did you do the firewall and frame with the motor and cab on it?

I removed motor and honed it and re-ringed the pistons. Also replaced every gasket from oil pan to carb and rebuilt the monojet 1 barrell. I have never removed the cab but need to change the cab mounts so I will be in the future.

C10NEWGUY · 12-06-2010, 10:15 PM

Just ordered new front and rear brake drums as well. Im really looking foward to the finish line on this build as it is my first ground up build.

C10NEWGUY · 12-10-2010, 10:37 PM

new pic of inline 250

C10NEWGUY · 08-07-2011, 01:05 AM

Just picked up some 18" titan wheels. Will have pics after i bore out center to fit hub.

C10NEWGUY · 03-07-2012, 10:55 PM

truck is going to paint this week

bbinaz59 · 03-08-2012, 03:17 PM

Looking good! What color will it be?

08-04-2009, 01:35 PM	#2
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build i drove the inline 6 up on the trailer. it has a 4 speed manual but started life as a 3 on the tree Attached Images Last edited by C10NEWGUY; 08-04-2009 at 01:36 PM.

08-04-2009, 01:39 PM	#3
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build rust in the rocker panels and the bottom of the passenger core support. Attached Images

08-04-2009, 01:42 PM	#4
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build already picked up a new passenger fender as the one on truck was attacked by a bb gun LOL and a new driver rocker Attached Images

08-04-2009, 01:44 PM	#5
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build check out the crack in the exhaust manifold. also the 4 speed didnt have a housing cover on it. Attached Images Last edited by C10NEWGUY; 08-04-2009 at 01:45 PM.

08-04-2009, 01:52 PM	#6
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build gutted the inside and pulled the bed (sanded and spray painted the frame temp to stop rust) which had a sheet of osb in it. After pulling the osb i found this... Attached Images

08-04-2009, 01:33 PM	#1
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	My 68 stepside build well to start off i bought this on ebay for 830 bucks. Title says its a 69 but I think it is mistitled. yes the vin matches the title. it has a hand operated ebrake and grille is a 68. anyway here it is as i bought it for 830. pics are straight from the ebay auction. Attached Images

08-04-2009, 02:10 PM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: My 68 stepside build Great looking build, good luck with it! And it looks like money well spent... What are your plans for it? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-04-2009, 03:14 PM	#8
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: My 68 stepside build looks like you got into right, and are making leaps and bounds already... good luck with your build! Heath __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

08-13-2009, 09:32 AM	#10
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build well latest progress is I gutted the bed rails and trashed em they was just too far gone with cancer when repop are like 100 bucks a set. Also started to pull the drive trail to clean up the bay and paint. Also ditched the exhaust manifold with the crack on the ear and getting the flowtech part#11510 headers from jegs. __________________ 1977 Chevy C10 RWD long bed Last edited by C10NEWGUY; 08-13-2009 at 09:33 AM.

09-11-2009, 11:38 PM	#11
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build Got a question guys...what is a good place for a replacement oil pan for the 250 inline? __________________ 1977 Chevy C10 RWD long bed

12-16-2009, 02:15 AM	#12
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build Update! Will get pics up soon but as of today.... replaced all 4 wheel cylinders replaced front/rear brake shoes replaced hydraulic brake hoses front/rear pulled heater core and shaved firewall shaved third brake light installed new front shocks cut one coil from front coils installed 6" drop rear coils installed new adjustable rear track bar driver rocker panel install is complete fixed passenger rocker rust USED OEM core support with no rust installed repop passenger side fender I still need info on an oil pan for an inline six???? Is it the same pan as a small block? My pan is shot and leaks like crazy! __________________ 1977 Chevy C10 RWD long bed Last edited by C10NEWGUY; 12-16-2009 at 02:20 AM.

02-23-2010, 11:07 PM	#13
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build Well the chassis is pretty much done and the inline is getting rebuilt as I type this. The block will now be .040 over. I rebuilt the 4 speed as well. I will get some pics up soon. __________________ 1977 Chevy C10 RWD long bed

08-24-2010, 11:11 AM	#15
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build I got the inline 6 back awhile ago and have put it back in the truck. The truck is now in the stages of getting into primer. __________________ 1977 Chevy C10 RWD long bed

12-06-2010, 07:40 PM	#16
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build Not on here too much but I have made leaps and bounds as of the past few months....See pics Attached Images __________________ 1977 Chevy C10 RWD long bed

12-06-2010, 08:38 PM	#17
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: My 68 stepside build nice progress.. did you do the firewall and frame with the motor and cab on it? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

12-06-2010, 10:15 PM	#19
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build Just ordered new front and rear brake drums as well. Im really looking foward to the finish line on this build as it is my first ground up build. __________________ 1977 Chevy C10 RWD long bed

12-10-2010, 10:37 PM	#20
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build new pic of inline 250 Attached Images __________________ 1977 Chevy C10 RWD long bed

08-07-2011, 01:05 AM	#21
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build Just picked up some 18" titan wheels. Will have pics after i bore out center to fit hub. __________________ 1977 Chevy C10 RWD long bed

03-07-2012, 10:55 PM	#22
C10NEWGUY Registered User Join Date: Jul 2009 Location: Phoenix Posts: 60	Re: My 68 stepside build truck is going to paint this week __________________ 1977 Chevy C10 RWD long bed

03-08-2012, 03:17 PM	#23
bbinaz59 Registered User Join Date: Dec 2011 Location: Goodyear, AZ Posts: 119	Re: My 68 stepside build Looking good! What color will it be? __________________ Bryan See all pics of Project#2=72 here: http://1972c10build.shutterfly.com/pictures

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.