|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-22-2010, 10:46 AM
|
#1 |
|
Registered User
Join Date: May 2007
Location: East Haven, CT
Posts: 882
|
Calipers not installing on Western Chassis spindles
I'm so close to getting this truck on the ground but ran into an issue. My calipers will not fit between the castings of the spindle. These are 1'' rotors and I did order the right spindles. Is minor grinding necessary? It's just a tad too much material so it's not allowing the caliper to slip in.
__________________
87 Chevy 2wd SWB: 305/700r4 Dual Exhaust, K&N Filter, Injector Pod Spacer, TBI Spacer, Belltech Front Sway Bar, Corvette Servo, Western Chassis 4/6 and c-notch |
|
|
|
07-22-2010, 10:54 AM
|
#2 |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: Calipers not installing on Western Chassis spindles
Just give them both a little love. I had to clearance my spindles a little bit because they were hitting the control arms at full lock when turning. No big deal, just a little work with the die grinder and done.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
|
|
|
|
07-22-2010, 10:55 AM
|
#3 |
|
Registered User
Join Date: Jun 2010
Location: Missouri
Posts: 208
|
Re: Calipers not installing on Western Chassis spindles
This might be a dumb question, but aren't you supposed to compress the "boot" with a board before putting the caliper on?
That might be the issue...?
__________________
78 Silverado 1/2 Ton LWB (restore) 78 Silverado 3/4 Ton LWB (parts truck & practice - eventually a work horse) My Build thread: http://67-72chevytrucks.com/vboard/s....php?p=4082128 Ellis Benus - Web Design Columbia Mo & Google Fan Boy! 
|
|
|
|
|
07-22-2010, 11:17 AM
|
#4 | |
|
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,684
|
Re: Calipers not installing on Western Chassis spindles
Quote:
But it sounds like it is a clearance issue between the caliper and the casting on the spindle. I agree with JonBoy, the casting probably just needs cleaned up. Hit the spots where the interference is lightly with a good bastard file or die grinder a little at a time until there is a good fit. Maybe even on both parts.
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
|
|
|
|
|
07-22-2010, 11:25 AM
|
#5 |
|
Registered User
Join Date: Sep 2008
Location: Bailey, NC
Posts: 2,462
|
Re: Calipers not installing on Western Chassis spindles
Do you have any pics of the problem areas? Just curious.
__________________
Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT |
|
|
|
|
07-22-2010, 12:44 PM
|
#6 |
|
Registered User
Join Date: May 2007
Location: East Haven, CT
Posts: 882
|
Re: Calipers not installing on Western Chassis spindles
Got them installed. I compressed the pads a tad more, and with a little hammer tap they went on. Truck is LOW. Pics to come after my trip to the alignment shop.
__________________
87 Chevy 2wd SWB: 305/700r4 Dual Exhaust, K&N Filter, Injector Pod Spacer, TBI Spacer, Belltech Front Sway Bar, Corvette Servo, Western Chassis 4/6 and c-notch |
|
|
|
|
07-22-2010, 12:46 PM
|
#7 |
|
Registered User
Join Date: Jun 2010
Location: Missouri
Posts: 208
|
Re: Calipers not installing on Western Chassis spindles
 Sweet! Can't wait for pics!
__________________
78 Silverado 1/2 Ton LWB (restore) 78 Silverado 3/4 Ton LWB (parts truck & practice - eventually a work horse) My Build thread: http://67-72chevytrucks.com/vboard/s....php?p=4082128 Ellis Benus - Web Design Columbia Mo & Google Fan Boy!
|
|
|
|
|
07-22-2010, 03:48 PM
|
#8 |
|
Registered User
Join Date: Jul 2010
Location: New Port Richey, Fl
Posts: 92
|
Re: Calipers not installing on Western Chassis spindles
Yes pics are a good thing!
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
