OK DJM Flip brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 11-02-2010, 09:03 PM

used DJM flip brackets to fit 73-87 1/2 tons, they could use some paint
$40 plus shipping SOLD
Name: flip brackets.jpg
Views: 588
Size: 54.5 KB

Name: flip brackets (2).jpg
Views: 548
Size: 58.7 KB

joe231 · 11-05-2010, 04:29 PM

offers?
I can powder coat or paint them if that would help....

SS Delux · 11-05-2010, 04:50 PM

Is it just these or does it come with the u bolts and lowering shock mounts ? how much shipping to windsor ontario canada ? how much more if they were powdercoated ?

joe231 · 11-05-2010, 05:42 PM

These flip brackets are all I have.
you can use front shocks on the rear with no extensions.
these were on my truck before I got it.
I'm not sure on shipping to Canada...
who should i use?

joe231 · 11-07-2010, 06:28 PM

how about $40 shipped to the lower 48?
anyone?

jonzcustomshop · 11-17-2010, 07:36 PM

joe, what are they for?
(flip brakets)

joe231 · 11-17-2010, 07:59 PM

Jon,
On the trucks with leaf springs. You use these to put the axle on top of the spring to lower the truck. The hole for the spring bolt/axle locator is off set so
It moves the axle back so you don't have to change the length of the driveshaft.
It's a bolt in deal. To use these you also need shock extensions or you can run front shocks on the rear with no mods.
Posted via Mobile Device

C low · 11-17-2010, 08:08 PM

Do i have to be a supporting member to buy?

joe231 · 11-17-2010, 08:13 PM

Quote:

Originally Posted by C low

Do i have to be a supporting member to buy?

No sir,
Only to sell or post a wanted to buy
Posted via Mobile Device

badchevy · 11-18-2010, 01:02 AM

Would you take $25 shipped to Cheyenne, WY? If so, I'll take them. PM sent also

C low · 11-18-2010, 01:29 AM

I believe i am first in line

joe231 · 11-18-2010, 08:06 AM

I'll give Jon the first opportunity, If he is interested.
then C low,
then badchevy (I'm holding firm at $40 at this time)

badchevy · 11-19-2010, 12:19 AM

Quote:

Originally Posted by C low

I believe i am first in line

Sorry bud, just making an offer in case it makes it down to me.

joe231 · 11-19-2010, 10:56 PM

Nothing from Jon,
C low are you interested?
Posted via Mobile Device

C low · 11-20-2010, 12:59 PM

I will have to pass my buddy with paypal flaked out and i dont have an account

joe231 · 11-20-2010, 02:25 PM

You can send me a money order.
Posted via Mobile Device

C low · 11-20-2010, 06:45 PM

give me a day.. if I dont reply I wont need em..

joe231 · 11-20-2010, 07:38 PM

Will do.
Posted via Mobile Device

joe231 · 12-05-2010, 09:33 PM

TTT
Posted via Mobile Device

badchevy · 12-06-2010, 12:49 AM

Still interested in them. Are you still firm on the price? If not, what's the lowest you'll go? Let me know and we'll go from there. Thanks.

badchevy · 12-07-2010, 11:05 PM

Sorry bud but I'm not interested in these anymore. Good luck with the sale.

joe231 · 12-08-2010, 09:34 AM

Ok
Thanks
Sorry I didn't see your earlier post.

$35 shipped in the lower 48
Posted via Mobile Device

Charles90706 · 12-11-2010, 12:15 AM

if you can give instructions on the installation and if you can use stock u-bolts and all hardware im very interested

benoit454 · 12-12-2010, 12:06 AM

unbolt your u bolts, put the leaf spring under the axle or axle over top of the leaf, put the brackets under the spring perch on the axle, and put the centering pin on thew leafs in the holes on these, the holes faces forward if I remember right, put the plate under the leaf and u bolts on top of the axle down into the plate, putthe nuts back on and torque to spec. I would not use stock u bolts they are not really supposed to be reused they could be weak or stretched or anything. Any parts store should have them.

Rusty85C-10 · 12-29-2010, 02:21 PM

Are these still available?

11-02-2010, 09:03 PM	#1
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	DJM Flip brackets used DJM flip brackets to fit 73-87 1/2 tons, they could use some paint $40 plus shipping SOLD __________________ *CHEVY ONLY* Last edited by joe231; 01-01-2011 at 11:33 PM.

11-05-2010, 04:29 PM	#2
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets offers? I can powder coat or paint them if that would help.... __________________ *CHEVY ONLY*

11-05-2010, 04:50 PM	#3
SS Delux Registered User Join Date: Jun 2010 Location: windsor Posts: 290	Re: DJM Flip brackets Is it just these or does it come with the u bolts and lowering shock mounts ? how much shipping to windsor ontario canada ? how much more if they were powdercoated ?

11-05-2010, 05:42 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets These flip brackets are all I have. you can use front shocks on the rear with no extensions. these were on my truck before I got it. I'm not sure on shipping to Canada... who should i use? __________________ *CHEVY ONLY* Last edited by joe231; 11-05-2010 at 05:42 PM.

11-07-2010, 06:28 PM	#5
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets how about $40 shipped to the lower 48? anyone? __________________ *CHEVY ONLY* Last edited by joe231; 11-07-2010 at 06:48 PM.

11-17-2010, 07:36 PM	#6
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: DJM Flip brackets joe, what are they for? (flip brakets) __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

11-17-2010, 07:59 PM	#7
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets Jon, On the trucks with leaf springs. You use these to put the axle on top of the spring to lower the truck. The hole for the spring bolt/axle locator is off set so It moves the axle back so you don't have to change the length of the driveshaft. It's a bolt in deal. To use these you also need shock extensions or you can run front shocks on the rear with no mods. Posted via Mobile Device __________________ *CHEVY ONLY*

11-17-2010, 08:08 PM	#8
C low Registered User Join Date: May 2010 Location: Albany Oregon Posts: 71	Re: DJM Flip brackets Do i have to be a supporting member to buy?

11-18-2010, 01:02 AM	#10
badchevy Registered User Join Date: May 2010 Location: San Antonio, TX Posts: 102	Re: DJM Flip brackets Would you take $25 shipped to Cheyenne, WY? If so, I'll take them. PM sent also

11-18-2010, 01:29 AM	#11
C low Registered User Join Date: May 2010 Location: Albany Oregon Posts: 71	Re: DJM Flip brackets I believe i am first in line

11-18-2010, 08:06 AM	#12
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets I'll give Jon the first opportunity, If he is interested. then C low, then badchevy (I'm holding firm at $40 at this time) __________________ *CHEVY ONLY* Last edited by joe231; 12-05-2010 at 09:32 PM.

11-19-2010, 10:56 PM	#14
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets Nothing from Jon, C low are you interested? Posted via Mobile Device __________________ *CHEVY ONLY*

11-20-2010, 12:59 PM	#15
C low Registered User Join Date: May 2010 Location: Albany Oregon Posts: 71	Re: DJM Flip brackets I will have to pass my buddy with paypal flaked out and i dont have an account Last edited by C low; 11-20-2010 at 12:59 PM.

11-20-2010, 02:25 PM	#16
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets You can send me a money order. Posted via Mobile Device __________________ *CHEVY ONLY*

11-20-2010, 06:45 PM	#17
C low Registered User Join Date: May 2010 Location: Albany Oregon Posts: 71	Re: DJM Flip brackets give me a day.. if I dont reply I wont need em..



Register or Log In To remove these advertisements.

11-20-2010, 07:38 PM	#18
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets Will do. Posted via Mobile Device __________________ *CHEVY ONLY*

12-05-2010, 09:33 PM	#19
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets TTT Posted via Mobile Device __________________ *CHEVY ONLY*

12-06-2010, 12:49 AM	#20
badchevy Registered User Join Date: May 2010 Location: San Antonio, TX Posts: 102	Re: DJM Flip brackets Still interested in them. Are you still firm on the price? If not, what's the lowest you'll go? Let me know and we'll go from there. Thanks.

12-07-2010, 11:05 PM	#21
badchevy Registered User Join Date: May 2010 Location: San Antonio, TX Posts: 102	Re: DJM Flip brackets Sorry bud but I'm not interested in these anymore. Good luck with the sale.

12-08-2010, 09:34 AM	#22
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: DJM Flip brackets Ok Thanks Sorry I didn't see your earlier post. $35 shipped in the lower 48 Posted via Mobile Device __________________ *CHEVY ONLY*

12-11-2010, 12:15 AM	#23
Charles90706 Registered User Join Date: Dec 2010 Location: Lynwood California Posts: 16	Re: DJM Flip brackets if you can give instructions on the installation and if you can use stock u-bolts and all hardware im very interested

12-12-2010, 12:06 AM	#24
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: DJM Flip brackets unbolt your u bolts, put the leaf spring under the axle or axle over top of the leaf, put the brackets under the spring perch on the axle, and put the centering pin on thew leafs in the holes on these, the holes faces forward if I remember right, put the plate under the leaf and u bolts on top of the axle down into the plate, putthe nuts back on and torque to spec. I would not use stock u bolts they are not really supposed to be reused they could be weak or stretched or anything. Any parts store should have them. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

12-29-2010, 02:21 PM	#25
Rusty85C-10 Registered User Join Date: Dec 2010 Location: Miami, FL Posts: 14	Re: DJM Flip brackets Are these still available?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.