New Stuff F/S-Bags, Switches, Heads, HEI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PrimeredThunder · 05-28-2003, 06:38 PM

OK I need to get rid of this stuff soon!

I've got 2 Brand-new F9000 Firestone bags for $110 shipped

Firestone Dual Paddle switch setup w/ dual needle guage-$100 shipped

Set of 2.02 Chevy SBC heads that need rebuilt-$75 plus ship

Brand New Chevy HEI has no rotor or vaccum advance-$75 plus shipping

Email me at maxximus72@hotmail.com for pictures and/or questions

Thanks,
Kenny

73stepside · 05-28-2003, 11:49 PM

what's the casting number on the heads

Chevy Wrench · 05-28-2003, 11:56 PM

What are the specs on the bags? ie: port size, single or double convoluted. Any pics?

PrimeredThunder · 05-29-2003, 12:57 AM

73Stepside-I'm not sure off hand what teh casting numbers are, but I believe if my memory serves me right the heads are from 74' and have 2.02 intake valves and are a heavy casting(no cracks etc)

ChevyWrench-The bags have a 3/8 port, they are sleeved bags...I'll attach a pic(theya re teh bags on the left), you can find them on www.ridetech.com under catalog.

Thanks,
Kenny

Old Chevy Lover · 05-29-2003, 10:35 AM

can you get some pic's of the heads, showing the valves and the casting numbers?

PrimeredThunder · 05-29-2003, 10:42 AM

I can get a pic and stuff later tonite, but I'm not at home right now, and I dont know the numbers right off hand.

Old Chevy Lover · 05-29-2003, 10:44 AM

that's cool.. right off hand, do you know how bad of shape they are in? are they complete (springs, etc,etc..)?

PrimeredThunder · 05-29-2003, 11:14 AM

The heads are complete, I pulled them off the sbc in my 72' when I rebuilt it last summer. They ran but one of the valves got over-adjusted by the previous ower and got mushroomed out a bit above the retainer. They need rebuilt and they should be good to go. Pics will show a lot more than my words can.
Thanks

Old Chevy Lover · 05-29-2003, 11:25 AM

If you want, you can send the pic's to my email when you get them, commagic@bright.net

PrimeredThunder · 05-30-2003, 08:24 PM

Bags have been sold!-Thank You 70 Jimmy

Also, Old Chevy Lover YGM!

Thanks,
Kenny

05-28-2003, 06:38 PM	#1
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	New Stuff F/S-Bags, Switches, Heads, HEI OK I need to get rid of this stuff soon! I've got 2 Brand-new F9000 Firestone bags for $110 shipped Firestone Dual Paddle switch setup w/ dual needle guage-$100 shipped Set of 2.02 Chevy SBC heads that need rebuilt-$75 plus ship Brand New Chevy HEI has no rotor or vaccum advance-$75 plus shipping Email me at maxximus72@hotmail.com for pictures and/or questions Thanks, Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

05-28-2003, 11:49 PM	#2
73stepside Registered User Join Date: Feb 2002 Location: Moore OK 73160 Posts: 974	what's the casting number on the heads __________________ 04 GMC Sierra RCSS 70 CST LWB 04 HD Sportster 1200 Custom

05-28-2003, 11:56 PM	#3
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	What are the specs on the bags? ie: port size, single or double convoluted. Any pics? __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

05-29-2003, 12:57 AM	#4
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	73Stepside-I'm not sure off hand what teh casting numbers are, but I believe if my memory serves me right the heads are from 74' and have 2.02 intake valves and are a heavy casting(no cracks etc) ChevyWrench-The bags have a 3/8 port, they are sleeved bags...I'll attach a pic(theya re teh bags on the left), you can find them on www.ridetech.com under catalog. Thanks, Kenny Attached Images __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

05-29-2003, 10:35 AM	#5
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	can you get some pic's of the heads, showing the valves and the casting numbers? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

05-29-2003, 10:42 AM	#6
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	I can get a pic and stuff later tonite, but I'm not at home right now, and I dont know the numbers right off hand. __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

05-29-2003, 10:44 AM	#7
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	that's cool.. right off hand, do you know how bad of shape they are in? are they complete (springs, etc,etc..)? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

05-29-2003, 11:14 AM	#8
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	The heads are complete, I pulled them off the sbc in my 72' when I rebuilt it last summer. They ran but one of the valves got over-adjusted by the previous ower and got mushroomed out a bit above the retainer. They need rebuilt and they should be good to go. Pics will show a lot more than my words can. Thanks __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

05-29-2003, 11:25 AM	#9
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	If you want, you can send the pic's to my email when you get them, commagic@bright.net __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto Last edited by Old Chevy Lover; 05-29-2003 at 11:31 AM.

05-30-2003, 08:24 PM	#10
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Bags have been sold!-Thank You 70 Jimmy Also, Old Chevy Lover YGM! Thanks, Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.