This is how bad I suck!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Warbones · 06-08-2003, 11:13 PM

For my first little project on my 67 truck I thought I would take off the cowl and clean out the drain holes. I suck so bad I couldn't even get off the windshield wiper arms. LOL. I am still confused on the other drains and where they are.

>X< · 06-08-2003, 11:42 PM

get a screwdriver and pop out the clips. i think theres a tool that makes it easier

**Canadian694x4** · 06-08-2003, 11:51 PM

does anyone have pics of these locations? GeeMmm maybe?

*Gee_Emm* · 06-08-2003, 11:52 PM

Don't forget to do your doors and front fenders too!!

*Gee_Emm* · 06-08-2003, 11:58 PM

Hmm, no pics, kinda hard to explain the cowl one, best thing you can do is run water in the cowl till it flows out nice on both sides. for the front fender and doors, look underneath them, you will see little slits, run water in that area and watch for the slits to run freely, pick out any crap that gets stuck as the water flows.

I also do a whole number to my truck at least once a year, basically flush it out where ever possible, for the bed I stick the hose up into the wheel wells through the opening, lots of crap gets in there, I do the same to the front fenders. If you do a good job it should take you 15 minutes. Rinse where ever possible.

Ok I am done my preaching once again :p

Warbones · 06-12-2003, 08:43 PM

Today is a good day. LOL

06-08-2003, 11:13 PM	#1
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	This is how bad I suck!!! For my first little project on my 67 truck I thought I would take off the cowl and clean out the drain holes. I suck so bad I couldn't even get off the windshield wiper arms. LOL. I am still confused on the other drains and where they are. __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

06-08-2003, 11:42 PM	#2
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	get a screwdriver and pop out the clips. i think theres a tool that makes it easier __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

06-08-2003, 11:51 PM	#3
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	does anyone have pics of these locations? GeeMmm maybe? __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

06-12-2003, 08:43 PM	#6
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	Got them Wiper arms off today! Today is a good day. LOL __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-08-2003, 11:52 PM	#4
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Don't forget to do your doors and front fenders too!!

06-08-2003, 11:58 PM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Hmm, no pics, kinda hard to explain the cowl one, best thing you can do is run water in the cowl till it flows out nice on both sides. for the front fender and doors, look underneath them, you will see little slits, run water in that area and watch for the slits to run freely, pick out any crap that gets stuck as the water flows. I also do a whole number to my truck at least once a year, basically flush it out where ever possible, for the bed I stick the hose up into the wheel wells through the opening, lots of crap gets in there, I do the same to the front fenders. If you do a good job it should take you 15 minutes. Rinse where ever possible. Ok I am done my preaching once again :p



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.