ID Rear Cab Mount Brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 11-18-2013, 01:44 AM

These are a pair of original rear cab mount brackets, that have been abrasive blasted. There is a little pitting from rust where the rubber mount goes, but they are very useable. I have reamed the rivet holes out to 7/16" and included new grade 8 hardware. I'm asking $55.00 shipped in the US.

LostMy65 · 11-18-2013, 01:53 AM

These also work as a good solution for the 3/4 rear cab mounts that often fail. I got mine from Tony, but these you have listed are a great deal less $.

Leroy-B1 · 11-18-2013, 08:30 AM

I may need these I'm about 10 hours from home working and can't check out my frame until Friday....changing the frame from my 60 to a 66 frame....will also need the power steering conversion and the brake booster bracket as well

**Captainfab** · 11-27-2013, 02:31 AM

Ttt

natecr · 01-02-2014, 12:37 AM

Still for sale?

**Captainfab** · 01-02-2014, 12:42 AM

Yes I still have them.

natecr · 01-02-2014, 12:42 AM

Oh and would i need your steering box adaptor to put a 72' manual box on my 66 that im swapping a 72 front end in?

natecr · 01-02-2014, 01:29 AM

Obviously don't want to spend extra on shipping if i don't need it. Do you have any solutions for track bars? I got a ho52 being replaced by a leaf spring 12 bolt so i need to get a track bar mount or a whole new set up.

**Captainfab** · 01-02-2014, 01:47 AM

Yes you will need a steering box adapter plate, and possibly the tube and flange if you are keeping the original steeing column. Why not just go with a power steering box? I do not have anything for the panhard bar. You can simply cut the original off of the HO52 and weld it to the 12 bolt axle tube. I do have new trailing arm mounts though.

Quote:

Originally Posted by natecr

Oh and would i need your steering box adaptor to put a 72' manual box on my 66 that im swapping a 72 front end in?

Quote:

Originally Posted by natecr

Obviously don't want to spend extra on shipping if i don't need it. Do you have any solutions for track bars? I got a ho52 being replaced by a leaf spring 12 bolt so i need to get a track bar mount or a whole new set up.

natecr · 01-02-2014, 03:43 AM

Dang was kinda assuming the manual box would bolt in cause its a manual box truck.

natecr · 01-02-2014, 03:45 AM

Quote:

Originally Posted by natecr

Dang was kinda assuming the manual box would bolt in cause its a manual box truck.

And i have a good manual box and i don't have any power steering items.

**Captainfab** · 01-03-2014, 12:01 AM

If you just want manual steering why not keep your original steeing box?

If you did want power steering, a power steering box shouldn't be that hard to find over there. GM made millions of them from '68-'87.

Quote:

Originally Posted by natecr

Dang was kinda assuming the manual box would bolt in cause its a manual box truck.

Quote:

Originally Posted by natecr

And i have a good manual box and i don't have any power steering items.

natecr · 01-03-2014, 01:36 AM

Would it bolt to the 72 steering? I want the cab mounts what do we do for pay pal?

**Captainfab** · 01-03-2014, 01:52 AM

Yes your original pitman arm will bolt up to the '71-'87 draglinks.

I'll send you a PM with payment details.

Quote:

Originally Posted by natecr

Would it bolt to the 72 steering? I want the cab mounts what do we do for pay pal?

natecr · 01-03-2014, 01:58 AM

I didnt think it would. Well thats cool. Thanks for the info and the cab mounts!

**Captainfab** · 01-04-2014, 01:02 AM

SOLD to natecr

Thanks Nate, they are on their way

natecr · 01-08-2014, 01:15 AM

Got them yesterday thanks again. Keeping an eye out for parts from you i can use! On a side note i have a c20 looking for pan hard bar bushings. All the poly one say only for c10 any ideas? Are the trailing arm bushings the same for c10 and c20?

**Captainfab** · 01-08-2014, 02:35 AM

Both the panhard bar and the trailing arm bushings are the same between the C10 and C20.

Quote:

Originally Posted by natecr

Got them yesterday thanks again. Keeping an eye out for parts from you i can use! On a side note i have a c20 looking for pan hard bar bushings. All the poly one say only for c10 any ideas? Are the trailing arm bushings the same for c10 and c20?

11-18-2013, 01:44 AM	#1
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Rear Cab Mount Brackets These are a pair of original rear cab mount brackets, that have been abrasive blasted. There is a little pitting from rust where the rubber mount goes, but they are very useable. I have reamed the rivet holes out to 7/16" and included new grade 8 hardware. I'm asking $55.00 shipped in the US. Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-18-2013, 01:53 AM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Rear Cab Mount Brackets These also work as a good solution for the 3/4 rear cab mounts that often fail. I got mine from Tony, but these you have listed are a great deal less $. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-18-2013, 08:30 AM	#3
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Rear Cab Mount Brackets I may need these I'm about 10 hours from home working and can't check out my frame until Friday....changing the frame from my 60 to a 66 frame....will also need the power steering conversion and the brake booster bracket as well

11-27-2013, 02:31 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Rear Cab Mount Brackets Ttt __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-02-2014, 12:37 AM	#5
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Still for sale? __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-02-2014, 12:42 AM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Rear Cab Mount Brackets Yes I still have them. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-02-2014, 12:42 AM	#7
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Oh and would i need your steering box adaptor to put a 72' manual box on my 66 that im swapping a 72 front end in? __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-02-2014, 01:29 AM	#8
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Obviously don't want to spend extra on shipping if i don't need it. Do you have any solutions for track bars? I got a ho52 being replaced by a leaf spring 12 bolt so i need to get a track bar mount or a whole new set up. __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-02-2014, 03:43 AM	#10
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Dang was kinda assuming the manual box would bolt in cause its a manual box truck. __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-03-2014, 01:36 AM	#13
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Would it bolt to the 72 steering? I want the cab mounts what do we do for pay pal? __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-03-2014, 01:58 AM	#15
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets I didnt think it would. Well thats cool. Thanks for the info and the cab mounts! __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-04-2014, 01:02 AM	#16
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Rear Cab Mount Brackets SOLD to natecr Thanks Nate, they are on their way __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-08-2014, 01:15 AM	#17
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Got them yesterday thanks again. Keeping an eye out for parts from you i can use! On a side note i have a c20 looking for pan hard bar bushings. All the poly one say only for c10 any ideas? Are the trailing arm bushings the same for c10 and c20? __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.