front suspension help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tandm1999 · 03-11-2004, 08:26 PM

does anybody know or has any body swapped an early 60's front cross member for a late 60's early 70's front suspension and cross member
im wondering if the cross member from a 1962 will interchange with a crossmember from 1970 any info would be appreciated

mxman · 03-13-2004, 09:15 AM

do you have a late 60s xmember ? why not just use a 73-87

SCOTI · 03-13-2004, 12:18 PM

Yes... any front cross member from late 60's thru 87 will interchange. When using a c-member from the 73-ups, there are a couple of holes in the frame (one on each side) that require 'ovaling' to be able to get the bolts in. The disc brake c-members typically have the larger u-bolts (9/16" vs. 1/2") for mounting the lower control arms & are stronger (plus you can use the late model control arm rubber bushings for a better ride).

tandm1999 · 03-13-2004, 01:12 PM

i have a 72 3/4 ton xmember with 8 lug disc brakes

SCOTI · 03-13-2004, 02:38 PM

Is the crossmember from the 70 3/4 ton going to a 62 3/4 ton frame? I believe the 3/4 ton frames are different (taller) than 1/2 ton frames.

tandm1999 · 03-13-2004, 04:33 PM

yes i have a 62 3/3 ton gmc pickup that i want to put the 72 3/4 ton xmember on

03-11-2004, 08:26 PM	#1
tandm1999 Registered User Join Date: Feb 2004 Location: virginia Posts: 29	front suspension help does anybody know or has any body swapped an early 60's front cross member for a late 60's early 70's front suspension and cross member im wondering if the cross member from a 1962 will interchange with a crossmember from 1970 any info would be appreciated __________________ tommy

03-13-2004, 09:15 AM	#2
mxman Registered User Join Date: Mar 2004 Location: Saskatoon sk Posts: 20	hi do you have a late 60s xmember ? why not just use a 73-87

03-13-2004, 12:18 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,949	Yes... any front cross member from late 60's thru 87 will interchange. When using a c-member from the 73-ups, there are a couple of holes in the frame (one on each side) that require 'ovaling' to be able to get the bolts in. The disc brake c-members typically have the larger u-bolts (9/16" vs. 1/2") for mounting the lower control arms & are stronger (plus you can use the late model control arm rubber bushings for a better ride). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-13-2004, 01:12 PM	#4
tandm1999 Registered User Join Date: Feb 2004 Location: virginia Posts: 29	i have a 72 3/4 ton xmember with 8 lug disc brakes __________________ tommy

03-13-2004, 02:38 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,949	Is the crossmember from the 70 3/4 ton going to a 62 3/4 ton frame? I believe the 3/4 ton frames are different (taller) than 1/2 ton frames. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-13-2004, 04:33 PM	#6
tandm1999 Registered User Join Date: Feb 2004 Location: virginia Posts: 29	yes i have a 62 3/3 ton gmc pickup that i want to put the 72 3/4 ton xmember on __________________ tommy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.