|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-06-2004, 06:13 PM
|
#1 |
|
Registered User
 
Join Date: Sep 2001
Location: Cumming, GA
Posts: 483
|
prevent engine rotation
I'm trying to torque the damper into place... I've only got 1/16" left to go but the crank is spinning now (at about 55 lb/ft). I put in the spark plugs which helped a bit but I e\need to keep the crank from turning - what's the technique??
|
|
|
|
11-06-2004, 06:19 PM
|
#2 |
|
Registered User
Join Date: Oct 2002
Location: S.W. Michigan
Posts: 403
|
I have used a screwdriver wedged inbetween the teeth of the flexplate and the block.
Never had any problems that way, although it might not be an acceptable practice.  Dan |
|
|
|
|
11-06-2004, 06:33 PM
|
#3 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Shove a looong flat head inbetween the torque converter and fle plate. Let it turn untill it smacks the bellhousing...it won't move any more.
Just remember to remove it before starting engine. |
|
|
|
|
11-06-2004, 06:59 PM
|
#4 |
|
Registered User
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
|
 MAC & SNAP-ON BOTH MAKE TOOLS TO TURN FLYWHEELS & FLEXPLATES. THEY WONT DAMAGE THE TEETH OR BEND THE FLEXPLATES. THE TOP ONE IS A MAC & THE BOTTOM ONE IS A SNAP-ON .  JOHN
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE.  THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES//LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
|
|
|
|
11-06-2004, 09:56 PM
|
#5 |
|
Registered User
Join Date: Sep 2001
Location: Cumming, GA
Posts: 483
|
In the end I just put a C-clamp on the flexplate and that did the trick.
|
|
|
|
|
11-06-2004, 10:35 PM
|
#6 |
|
Still drivin' a Rat Rod
Join Date: Sep 2004
Location: Monett Missouri
Posts: 4,925
|
Large vise grips will do the job nicely as well.Clamp them on the flexplate,and torque away.
__________________
Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the *a$#* 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website |
|
|
|
|
11-07-2004, 05:55 AM
|
#7 |
|
Registered User
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
|
Who needs a torque wrench??? They are just play toys for girls! Get your impact wrench & tighten until you can't tighten any further. The bolt heads will pop right off when they are properly torqued.
__________________
85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days!  05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal! 
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
