|
11-07-2004, 08:48 PM
|
#1 |
|
Registered User
Join Date: Aug 2003
Location: Nashport, OH
Posts: 549
|
Shifter Removal
OK, I feel like a doofus asking this one, but it's been over 20 years since I've worked on a 4-speed vehicle of any kind.........
....what's the trick for removing the shifter on the 4-speeds?!?!?! I thought that the round, slotted cup on top somehow screwed off, but I don't see where it does........I thought it prudent to ask you fellas before I took a BFH to it!!!! Thanks, Misled |
|
|
|
11-07-2004, 09:43 PM
|
#2 |
|
Registered User
Join Date: Sep 2004
Location: Pierre SD
Posts: 1,533
|
Push down and turn (counterclockwise I believe). It is spring loaded.
|
|
|
|
|
11-07-2004, 10:05 PM
|
#3 |
|
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
what he said
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's  (the family car)1993 Cherokee work ride/weekend wheeler |
|
|
|
|
11-07-2004, 10:24 PM
|
#4 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Vise grips or channel lock pliers help if it's tough. Push down & turn 1/4 turn counterclockwise.
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
|
11-07-2004, 10:25 PM
|
#5 |
|
Junior Member
Join Date: Sep 2003
Location: yreka, ca
Posts: 270
|
If it's fighting you, use a pair of channel locks. Put the jaws on the retainer and use them for leverage to push down on the spring and turn.
__________________
63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10 |
|
|
|
|
11-07-2004, 11:59 PM
|
#6 |
|
Registered User
Join Date: Aug 2003
Location: Nashport, OH
Posts: 549
|
Thanks a bunch guys.......you saved me from mutilating the #%%&** thing!!!!!!
Misled |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
