Wanted: Running V-8 305 or 350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 11-08-2004, 12:05 AM

Looking for a complete junk car or truck with a good running 305 or 350 in it. Can be a rotted out POS..just want the motor for my truck. in the $0-200 range
mid 80's Caprice cars are a good source but it can be anything must be early style with perimeter valvecover bolts

Must be in the Northeast - within 150-200 miles of Hartford, CT

Also have a I6 250cid and a 4speed granny that I would sell or trade/ - just incase someone in the northeast is interested

Thanks
Andy

grayw0lf · 11-09-2004, 09:41 PM

If you weren't so far away, I'd have you covered. I have a nice running 305HO w/ many new parts & I'm just looking for an excuse to pull it.

arkracing · 11-09-2004, 11:22 PM

I'm surprised noone has one...I guess there isn't too much representation up here in the NorthEast.

how about out of a car? sitting in your garage taking up space...a 305 - they should be all over the place? wonder why I can't find one though??? cause they are getting harder to find...but it must be good...no Knockers (not in my motor at least

)

matt67350 · 11-09-2004, 11:38 PM

I have two. Will you come to Texas?
350's 4bolt mains. one has a hot can and holly intake and the other is stock with a 2101 intake.
$400.00 each

67ChevyC10Stepside · 11-10-2004, 12:15 AM

i have a 305....but im in Butler PA....

arkracing · 11-10-2004, 09:19 AM

Sorry Guys...thanks for the offers though
I'll put the 250 6 Cylinder in it before I drive that far to get a motor, or i'll order a GM 350 Crate I would think that there would be a ton of 305's around - I just don't want to spend that kind of $ right now as I have too much tied up into patch panels and suspension and stuff.

My buddy wants me to put a 33k original milage 318Mopar motor/trans in the '69....I hate to do that, make mounts and stuff and then it has no resale value whatesoever....

so if anyone in the North east is looking for a good 1980 318Mopar with 3 speed trans (i assume it is a 727) $150 - must be picked up .... delivery within 75 miles for $50

67ChevyC10Stepside · 11-10-2004, 12:38 PM

if you change your mind or find a way you can have it real cheap....it's either gonna sit in storage or get sent to scrap if noone wants it.

11-08-2004, 12:05 AM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Wanted: Running V-8 305 or 350 Looking for a complete junk car or truck with a good running 305 or 350 in it. Can be a rotted out POS..just want the motor for my truck. in the $0-200 range mid 80's Caprice cars are a good source but it can be anything must be early style with perimeter valvecover bolts Must be in the Northeast - within 150-200 miles of Hartford, CT Also have a I6 250cid and a 4speed granny that I would sell or trade/ - just incase someone in the northeast is interested Thanks Andy __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

11-09-2004, 09:41 PM	#2
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	If you weren't so far away, I'd have you covered. I have a nice running 305HO w/ many new parts & I'm just looking for an excuse to pull it. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

11-09-2004, 11:22 PM	#3
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Suprised I'm surprised noone has one...I guess there isn't too much representation up here in the NorthEast. how about out of a car? sitting in your garage taking up space...a 305 - they should be all over the place? wonder why I can't find one though??? cause they are getting harder to find...but it must be good...no Knockers (not in my motor at least ) __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

11-09-2004, 11:38 PM	#4
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	I have two. Will you come to Texas? 350's 4bolt mains. one has a hot can and holly intake and the other is stock with a 2101 intake. $400.00 each __________________ 69 swb stepside, rebuild and upgrade in progress

11-10-2004, 12:15 AM	#5
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i have a 305....but im in Butler PA.... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-10-2004, 09:19 AM	#6
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	No Texas, No PA Sorry Guys...thanks for the offers though I'll put the 250 6 Cylinder in it before I drive that far to get a motor, or i'll order a GM 350 Crate I would think that there would be a ton of 305's around - I just don't want to spend that kind of $ right now as I have too much tied up into patch panels and suspension and stuff. My buddy wants me to put a 33k original milage 318Mopar motor/trans in the '69....I hate to do that, make mounts and stuff and then it has no resale value whatesoever.... so if anyone in the North east is looking for a good 1980 318Mopar with 3 speed trans (i assume it is a 727) $150 - must be picked up .... delivery within 75 miles for $50 __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

11-10-2004, 12:38 PM	#7
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	if you change your mind or find a way you can have it real cheap....it's either gonna sit in storage or get sent to scrap if noone wants it. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.