urgent i need ur help please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69mychevy · 06-27-2002, 03:50 PM

hey i've got a 69 chevy 1/2 ton stepside with flopro mufflers and chrome tips out the back i wanna make flames come out the back and i've got a few questions before i do it. 1 where should i get power? the plug wires??? 2 what kind of switch should i use?? ( i don't want it on all the time obvioiusly) 3 how far back in the exhaust should i place the spark plugs and should i just use 1 per pipe?? 4 are there any precautions i should take so i don't blow up my mufflers??
thanx for ur help

paintpyro · 06-27-2002, 04:12 PM

69, Welcome to the board. Nothing personal, but it sounds like you know what you want, but don't know how to get there. I would suggest buying a kit. One with parts, instructions, warnings, etc. Pick up a Street Rodeer or Rod and Custom magazine. I know that Autoloc advertises one, as well as Hot Rods of Norco.

Autoloc-flamethrower exhaust

Hot Rods of Norco-flamethrowers

Super Chevy · 06-27-2002, 04:26 PM

hey jordan,you probably know me from chat,anyway,itll be best to buy a kit like stated above...

Im sure someone will have a link

bigvinnie · 06-27-2002, 04:44 PM

here's a link to another kit..... looks the same as paintpyro's link but it's a lot cheaper...

http://www.hotrodsetc.net/flamekit.html

06-27-2002, 03:50 PM	#1
69mychevy yes i did post something Join Date: Jun 2002 Posts: 244	urgent i need ur help please hey i've got a 69 chevy 1/2 ton stepside with flopro mufflers and chrome tips out the back i wanna make flames come out the back and i've got a few questions before i do it. 1 where should i get power? the plug wires??? 2 what kind of switch should i use?? ( i don't want it on all the time obvioiusly) 3 how far back in the exhaust should i place the spark plugs and should i just use 1 per pipe?? 4 are there any precautions i should take so i don't blow up my mufflers?? thanx for ur help

06-27-2002, 04:12 PM	#2
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	69, Welcome to the board. Nothing personal, but it sounds like you know what you want, but don't know how to get there. I would suggest buying a kit. One with parts, instructions, warnings, etc. Pick up a Street Rodeer or Rod and Custom magazine. I know that Autoloc advertises one, as well as Hot Rods of Norco. Autoloc-flamethrower exhaust Hot Rods of Norco-flamethrowers __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster Last edited by paintpyro; 06-27-2002 at 04:24 PM.

06-27-2002, 04:44 PM	#4
bigvinnie Registered User Join Date: Aug 2001 Location: escondido, ca 92026 Posts: 1,222	here's a link to another kit..... looks the same as paintpyro's link but it's a lot cheaper... http://www.hotrodsetc.net/flamekit.html __________________ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project

06-27-2002, 04:26 PM	#3
Super Chevy Registered User Join Date: Feb 2001 Location: Ohio Posts: 1,025	hey jordan,you probably know me from chat,anyway,itll be best to buy a kit like stated above... Im sure someone will have a link



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.