|
06-27-2002, 05:12 PM
|
#1 |
|
72 Cheyenne
Join Date: Oct 2001
Location: San Diego
Posts: 2,086
|
Loose Tie Rod
Everything is tight but I can still move it back and forth, Bushings?
|
|
|
|
06-27-2002, 06:06 PM
|
#2 |
|
Member since 2000
Join Date: Dec 2000
Location: Mountain View Ca / Mexico
Posts: 7,874
|
tie rod arn't ment to be solid they willl alway have movment. i hope you meaning you can grip the tie rod and make it move toward the front of the car and toward the back fo the car wiht just a simple wrist movement.
|
|
|
|
|
06-27-2002, 06:25 PM
|
#3 |
|
72 Cheyenne
Join Date: Oct 2001
Location: San Diego
Posts: 2,086
|
Yes, I'm guessing that's normal. I'm still getting a clunk when I turn corners and a huge bam! when I hit pot holes. I just put new shocks in.
|
|
|
|
|
06-27-2002, 06:33 PM
|
#4 |
|
Registered User
Join Date: Aug 2001
Location: escondido, ca 92026
Posts: 1,222
|
I would be looking at upper and lower control arm bushings for the source of the noise.... best way to check is to be looking at the control arms from underneath while someone bounces the front of the truck up and down....
__________________
'72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project |
|
|
|
|
06-27-2002, 06:53 PM
|
#5 |
|
72 Cheyenne
Join Date: Oct 2001
Location: San Diego
Posts: 2,086
|
Okay we did that, now what should I look for to tell what the problem is? Thanks for the help.
|
|
|
|
|
06-27-2002, 07:56 PM
|
#6 |
|
Registered User
Join Date: Aug 2001
Location: escondido, ca 92026
Posts: 1,222
|
if the front springs aren't indexed properly into the lower spring pockets you'll get some noises there..... only other things to look for would be worn idler arm. ball joints, motor mounts.....
sometimes you just gotta wait til it gets worse to find the source
__________________
'72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project |
|
|
|
|
06-27-2002, 08:01 PM
|
#7 |
|
Registered Cruiser
Join Date: May 2002
Location: Las Vegas NV
Posts: 2,230
|
If the cushions under the radiator support are thin or just plain gone. The radiator support might be hitting the frame.
__________________
I intend to live forever. So far, so good. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
