71 short fleet On Air Ride! MUST SELL! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fastbagged68 · 11-15-2004, 01:44 AM

1971 Chevy Fleetside Set up to lay out on 20 & 22's
all new sheetmetal- new doors, 67fenders, cowl induction hood, raditator support, bedsides,tailgate, and front bed peice. Also have rear wheel wells in boxes still, complete oak bed kit with stainless in boxes.
Cab and cowl are the only orginal body parts, cab was bead blasted.
complete new backhaft- everything is custom. Raised bed floor.
Complete Air Ride system Slam RS 62 in front, F9000 rear, 8- 1/2" 250psi valves, 9 gallon air tank, custom wishbone, rear limit straps, kyb shocks, engine driven compressor- air lift still in box, reworked trailing arm crossmember, new tubular lower control arms, custom shock mounts.
Set up for small block & 700r4.
New rotors,
Power disc brakes- needs to be plumbed
power steering, factory tilt column
Have 4 extra doors-
Have just about all the hardware to finish truck- Email for questions
TOOMUCH TO LIST!!!
MUST SELL
LOCATED IN NOR Cal.
15k OR BEST OFFER 13K without WHEELS

NPilot1975 · 11-15-2004, 12:29 PM

Do you have any pix of the finished frame? Looking to lay my truck out the same but on 18's and 20's.

fastbagged68 · 11-16-2004, 03:15 AM

I will post more pics tommorrow. Must see to appreciate. 12k firm with out wheels. Needs motor and tranny. I also have a complete 350 in very good shape.

fastbagged68 · 11-16-2004, 11:37 PM

to the top!

fastbagged68 · 11-17-2004, 02:46 AM

ttt

fastbagged68 · 11-17-2004, 10:51 AM

ttt

luckydog · 11-17-2004, 02:25 PM

Looks to me like it's to the bottom

Sorry that was lame. Good lookin truck, good price.

fastbagged68 · 11-19-2004, 02:06 AM

Might have a 5.3 vortech & overdive unit out of new GM truck to go along with this deal.

fastbagged68 · 11-19-2004, 03:18 PM

Ttt

11-15-2004, 01:44 AM	#1
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	71 short fleet On Air Ride! MUST SELL! 1971 Chevy Fleetside Set up to lay out on 20 & 22's all new sheetmetal- new doors, 67fenders, cowl induction hood, raditator support, bedsides,tailgate, and front bed peice. Also have rear wheel wells in boxes still, complete oak bed kit with stainless in boxes. Cab and cowl are the only orginal body parts, cab was bead blasted. complete new backhaft- everything is custom. Raised bed floor. Complete Air Ride system Slam RS 62 in front, F9000 rear, 8- 1/2" 250psi valves, 9 gallon air tank, custom wishbone, rear limit straps, kyb shocks, engine driven compressor- air lift still in box, reworked trailing arm crossmember, new tubular lower control arms, custom shock mounts. Set up for small block & 700r4. New rotors, Power disc brakes- needs to be plumbed power steering, factory tilt column Have 4 extra doors- Have just about all the hardware to finish truck- Email for questions TOOMUCH TO LIST!!! MUST SELL LOCATED IN NOR Cal. 15k OR BEST OFFER 13K without WHEELS Attached Images

11-15-2004, 12:29 PM	#2
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Do you have any pix of the finished frame? Looking to lay my truck out the same but on 18's and 20's. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

11-16-2004, 11:37 PM	#4
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	to the top! Attached Images Last edited by fastbagged68; 11-17-2004 at 02:44 AM. Reason: added frame pics

11-17-2004, 02:25 PM	#7
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	Looks to me like it's to the bottom Sorry that was lame. Good lookin truck, good price. __________________ Horsepower is how FAST you hit the wall, torque is how HARD

11-16-2004, 03:15 AM	#3
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I will post more pics tommorrow. Must see to appreciate. 12k firm with out wheels. Needs motor and tranny. I also have a complete 350 in very good shape.

11-17-2004, 02:46 AM	#5
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	ttt

11-17-2004, 10:51 AM	#6
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	ttt

11-19-2004, 02:06 AM	#8
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Might have a 5.3 vortech & overdive unit out of new GM truck to go along with this deal.

11-19-2004, 03:18 PM	#9
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.