Window Regulator and Motor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thegame55974 · 08-25-2004, 11:08 PM

I also am selling a front driver side power window motor and regulator from the same 1989 Suburban. Works great and will take $40.00 shipped if there is any interest. Wiring and plugs included uncut.

thegame55974 · 09-24-2004, 03:15 AM

How about $35.00 Shipped? Anyone???

somery · 09-25-2004, 05:16 AM

will it work in a 86 suburban?

somery · 09-25-2004, 05:18 AM

my window doesn't roll up or down anymore i don't know if its the switch or the motor thingy. the back two work and sometimes the passenger front is stubborn

thegame55974 · 09-25-2004, 08:11 PM

I will check my Hollander manual at work on Monday and will let you know. Pretty sure they interchange. I suppose it could be wiring but if you have a spare battery, you can take off your door panel and jump straight to the regulator with a couple pieces of wire. You'll know for sure that it is the regulator at that point. Cheaper than just buying the parts and guessing. Let me know what happens.

somery · 09-27-2004, 11:05 PM

ok i'll check again monday after work. i am thinking i want the parts tho. but yeah i will check monday. i don't know how i am going to change the part tho. i got the panel and everything off....really tight in there . what do i jump? what happens if i get the polarity (using that correctly?) (pos/negative) wrong. i touched somthing bad and got some smoke

thegame55974 · 09-28-2004, 08:34 PM

I don't know if you smoked either the motor or the wiring. Your problem might be more than the regulator now. You will have to do some testing with a current test light to see if your wiring is fried. Then you will also know which is pos-neg. Also check fuses. Give me a PM as soon as youv'e determined the problem. The Hollander manual says that my parts interchange with yours.

rays68 · 09-28-2004, 09:33 PM

do you have any pics of the motor just want to make sure its the one that I need I have a 79 blazer but the doors are form a newer truck.

thegame55974 · 09-29-2004, 10:16 PM

Here is the picture.

Hope this works.

rays68 · 09-30-2004, 12:55 AM

I will check tomorrow if its the same I will take it for 35 shipped

rays68 · 11-03-2004, 08:46 PM

Hi I just installed the window motor today and it rolls up fine but when I try to roll the window down it rolls down for about 3 seconds and dies put mine back in and it works fine just a little slow that is the reason for me wanting a different motor your post said the motor worked great. Now im still in the same position less $35

somery · 11-06-2004, 10:57 PM

bummer...poor guy least it wasn't an engine, eh?

thegame55974 · 11-20-2004, 11:58 PM

Just checked this thread. Didn't tell me there was a problem with the motor. Read about it here first. He's being refunded including shipping. Ask him in about a week to a week and 1/2. I take the blame for a faulty motor. Worked the day before I shipped it. Things happen and I don't want a bad rep on this board.

08-25-2004, 11:08 PM	#1
thegame55974 Junior Member Join Date: Jul 2004 Location: Wahpeton N.D. Posts: 182	Window Regulator and Motor I also am selling a front driver side power window motor and regulator from the same 1989 Suburban. Works great and will take $40.00 shipped if there is any interest. Wiring and plugs included uncut.

09-24-2004, 03:15 AM	#2
thegame55974 Junior Member Join Date: Jul 2004 Location: Wahpeton N.D. Posts: 182	How about $35.00 Shipped? Anyone???

09-25-2004, 05:16 AM	#3
somery Registered User Join Date: Aug 2004 Location: texas Posts: 46	will it work in a 86 suburban?

09-25-2004, 05:18 AM	#4
somery Registered User Join Date: Aug 2004 Location: texas Posts: 46	my window doesn't roll up or down anymore i don't know if its the switch or the motor thingy. the back two work and sometimes the passenger front is stubborn

09-25-2004, 08:11 PM	#5
thegame55974 Junior Member Join Date: Jul 2004 Location: Wahpeton N.D. Posts: 182	I will check my Hollander manual at work on Monday and will let you know. Pretty sure they interchange. I suppose it could be wiring but if you have a spare battery, you can take off your door panel and jump straight to the regulator with a couple pieces of wire. You'll know for sure that it is the regulator at that point. Cheaper than just buying the parts and guessing. Let me know what happens.

09-27-2004, 11:05 PM	#6
somery Registered User Join Date: Aug 2004 Location: texas Posts: 46	ok i'll check again monday after work. i am thinking i want the parts tho. but yeah i will check monday. i don't know how i am going to change the part tho. i got the panel and everything off....really tight in there . what do i jump? what happens if i get the polarity (using that correctly?) (pos/negative) wrong. i touched somthing bad and got some smoke

09-28-2004, 08:34 PM	#7
thegame55974 Junior Member Join Date: Jul 2004 Location: Wahpeton N.D. Posts: 182	I don't know if you smoked either the motor or the wiring. Your problem might be more than the regulator now. You will have to do some testing with a current test light to see if your wiring is fried. Then you will also know which is pos-neg. Also check fuses. Give me a PM as soon as youv'e determined the problem. The Hollander manual says that my parts interchange with yours.

09-28-2004, 09:33 PM	#8
rays68 Registered User Join Date: Dec 2002 Location: Redondo Beach CA Posts: 131	do you have any pics of the motor just want to make sure its the one that I need I have a 79 blazer but the doors are form a newer truck.

09-29-2004, 10:16 PM	#9
thegame55974 Junior Member Join Date: Jul 2004 Location: Wahpeton N.D. Posts: 182	Here is the picture. Hope this works.

09-30-2004, 12:55 AM	#10
rays68 Registered User Join Date: Dec 2002 Location: Redondo Beach CA Posts: 131	I will check tomorrow if its the same I will take it for 35 shipped

11-03-2004, 08:46 PM	#11
rays68 Registered User Join Date: Dec 2002 Location: Redondo Beach CA Posts: 131	Hi I just installed the window motor today and it rolls up fine but when I try to roll the window down it rolls down for about 3 seconds and dies put mine back in and it works fine just a little slow that is the reason for me wanting a different motor your post said the motor worked great. Now im still in the same position less $35



Register or Log In To remove these advertisements.

11-06-2004, 10:57 PM	#12
somery Registered User Join Date: Aug 2004 Location: texas Posts: 46	bummer...poor guy least it wasn't an engine, eh?

11-20-2004, 11:58 PM	#13
thegame55974 Junior Member Join Date: Jul 2004 Location: Wahpeton N.D. Posts: 182	Just checked this thread. Didn't tell me there was a problem with the motor. Read about it here first. He's being refunded including shipping. Ask him in about a week to a week and 1/2. I take the blame for a faulty motor. Worked the day before I shipped it. Things happen and I don't want a bad rep on this board.

Register or Log In To remove these advertisements.