Where to get a hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

b454rat · 10-16-2004, 11:28 AM

Does anybody know where to get a hood for a 62?? This is the only thing that I can't really find for my suburban. I think Unlimited Products sells a 4" cowl hood, but I had stuff from them before and wasn't really impressed. At all.

orange72 · 11-03-2004, 07:57 PM

yea im wondering the same thing except i need one for my 72. i want a good 4 inch cowl so im figuring fiberglass. i would stick with a steel but there not a tall enough cowl.

zenish · 11-04-2004, 09:02 PM

www.usbodysource.com

coilspring66 · 11-10-2004, 11:27 AM

Hey rat..I have a hood you might be interested in. I think I'm only a couple of hours away from you, too. I don't want much for it, 'cause I'm sick of looking at it. It's very decent. Let me know if you're interested & I'll give you more info & pics if you want.

b454rat · 11-19-2004, 07:14 PM

Coilspring, where you located?? All the ones around here are rusted. Pics would be great if you have some.

coilspring66 · 11-22-2004, 12:32 PM

Hi Rat..I sent you a private message, concerning the hood. If you didn't get it for some reason, let me know. I'm not real computer savy..I'm always unsure weather I did things O.K. after the fact. Anyway, I'm in Bethlehem, PA..about 2 to 3 hours from you. I'll get you pics when I get your E-Mail address. My phone number is 610-867-7084 if you want to talk. ...Greg

10-16-2004, 11:28 AM	#1
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Where to get a hood Does anybody know where to get a hood for a 62?? This is the only thing that I can't really find for my suburban. I think Unlimited Products sells a 4" cowl hood, but I had stuff from them before and wasn't really impressed. At all. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

11-03-2004, 07:57 PM	#2
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	yea im wondering the same thing except i need one for my 72. i want a good 4 inch cowl so im figuring fiberglass. i would stick with a steel but there not a tall enough cowl. __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

11-04-2004, 09:02 PM	#3
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	www.usbodysource.com __________________ 1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing

11-19-2004, 07:14 PM	#5
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Coilspring, where you located?? All the ones around here are rusted. Pics would be great if you have some. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

11-22-2004, 12:32 PM	#6
coilspring66 Registered User Join Date: Nov 2004 Posts: 31	Hood Hi Rat..I sent you a private message, concerning the hood. If you didn't get it for some reason, let me know. I'm not real computer savy..I'm always unsure weather I did things O.K. after the fact. Anyway, I'm in Bethlehem, PA..about 2 to 3 hours from you. I'll get you pics when I get your E-Mail address. My phone number is 610-867-7084 if you want to talk. ...Greg

11-10-2004, 11:27 AM	#4
coilspring66 Registered User Join Date: Nov 2004 Posts: 31	Hey rat..I have a hood you might be interested in. I think I'm only a couple of hours away from you, too. I don't want much for it, 'cause I'm sick of looking at it. It's very decent. Let me know if you're interested & I'll give you more info & pics if you want.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.