Pics of Lowered Trucks using the Blazer Poly or Steel tank, please. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyDude · 11-24-2004, 05:55 PM

I am tying to decide if I can use a Poly or Steel 21 gallon tank form GMC Pauls or should I purchase a smaller 16 gallon tank from FuelCellGuy. If I were to go the 21 gallon Blazer tank route...Do I want Poly or Steel??? I know the FCG tank is awesome, a good price, and is made sweet by a member but I really want a bigger tank. Love to see any pics someone might have, just to see how low the Blazer tank sits on a lowered 2wd truck. My truck is dropped 4.5" in the front and 4" in the back. Thoughts, comments? Thanks Guys and Happy ThanksGiving!!!

Bowtiefreak · 11-24-2004, 09:29 PM

You can always ask FCG to make it bigger or deeper. Thats what I did. IMO, this is the best route to go. Make it the way you want it.

Cethern · 11-24-2004, 10:19 PM

Don't the guys that have lowered 2wd K5's use the same 21gal tank the truck came with or are they going with a smaller tank?

ChevyDude · 11-25-2004, 01:21 AM

Cethern...that is a goood question??? I was just wondering how LOW the blazer tank hung???......On a lowered C-10

ChevyDude · 11-25-2004, 10:51 AM

Anyone with a pic???

TEXAS 68 · 11-25-2004, 11:09 AM

This thread might help,lots of good info.I'm trying to decide also,talked to fcg on the phone and he knows his stuff. JMO

http://67-72chevytrucks.com/vboard/s....php3?t=117123

**lolife99** · 11-25-2004, 11:32 AM

I just went out and measured mine. I have 6" ECE drop springs and it's 6.5" from the ground. Sorry no pic. It's fine for normal driving. Load it up with 4 adults,... how low would it be? If you'd go lower,... or bag it,... I would want something different. I would still like to have a Fuelcellguy tank. Just looks too low hanging below the bumper.

slogo · 11-25-2004, 12:39 PM

here's one on mine

glock35ipsc · 11-25-2004, 12:45 PM

http://207.44.196.117/vboard/showthread.php3?t=74876

GreyHoundSteve · 11-26-2004, 12:24 PM

FCG knows his stuff. I bought a aluminum tank off a board member and asked fcg a question about the dimensions and he had the correct answer to me by the end of the day. The tank i bought doesnt look to fit as well as the ones fcg makes and when its time to put the new engine in my truck FCG will get my business for sure.

11-24-2004, 05:55 PM	#1
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Pics of Lowered Trucks using the Blazer Poly or Steel tank, please. I am tying to decide if I can use a Poly or Steel 21 gallon tank form GMC Pauls or should I purchase a smaller 16 gallon tank from FuelCellGuy. If I were to go the 21 gallon Blazer tank route...Do I want Poly or Steel??? I know the FCG tank is awesome, a good price, and is made sweet by a member but I really want a bigger tank. Love to see any pics someone might have, just to see how low the Blazer tank sits on a lowered 2wd truck. My truck is dropped 4.5" in the front and 4" in the back. Thoughts, comments? Thanks Guys and Happy ThanksGiving!!! __________________ Alex 1971 Lil' Red 350 SBC 700R4

11-24-2004, 09:29 PM	#2
Bowtiefreak Registered User Join Date: Jul 2003 Location: LeRoy, Mich. Posts: 854	You can always ask FCG to make it bigger or deeper. Thats what I did. IMO, this is the best route to go. Make it the way you want it. __________________ 1968 Chevy C10 Short Fleetside/Wood floor ECE 4-6 Drop / 406 Small Block 1971 Chevelle 427 Big Block

11-24-2004, 10:19 PM	#3
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 636	Don't the guys that have lowered 2wd K5's use the same 21gal tank the truck came with or are they going with a smaller tank? __________________ 72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit...

11-25-2004, 01:21 AM	#4
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Cethern...that is a goood question??? I was just wondering how LOW the blazer tank hung???......On a lowered C-10 __________________ Alex 1971 Lil' Red 350 SBC 700R4

11-25-2004, 10:51 AM	#5
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Anyone with a pic??? __________________ Alex 1971 Lil' Red 350 SBC 700R4

11-25-2004, 11:09 AM	#6
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	This thread might help,lots of good info.I'm trying to decide also,talked to fcg on the phone and he knows his stuff. JMO http://67-72chevytrucks.com/vboard/s....php3?t=117123 __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

11-25-2004, 11:32 AM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	hang too low! I just went out and measured mine. I have 6" ECE drop springs and it's 6.5" from the ground. Sorry no pic. It's fine for normal driving. Load it up with 4 adults,... how low would it be? If you'd go lower,... or bag it,... I would want something different. I would still like to have a Fuelcellguy tank. Just looks too low hanging below the bumper. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 11-25-2004 at 11:33 AM. Reason: spelling

11-25-2004, 12:39 PM	#8
slogo Registered User Join Date: Mar 2003 Location: Morristown,TN Posts: 481	here's one on mine

11-25-2004, 12:45 PM	#9
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	http://207.44.196.117/vboard/showthread.php3?t=74876 __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-26-2004, 12:24 PM	#10
GreyHoundSteve Registered User Join Date: Oct 2004 Location: DFW TX Posts: 769	FCG knows his stuff. I bought a aluminum tank off a board member and asked fcg a question about the dimensions and he had the correct answer to me by the end of the day. The tank i bought doesnt look to fit as well as the ones fcg makes and when its time to put the new engine in my truck FCG will get my business for sure.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.