WTB rad. overflow bottle and bracket. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spencra · 11-28-2004, 02:15 PM

Does anybody have one of these? If so I would be interested.

Thanks in advance.

**JIMs70GMC** · 11-28-2004, 06:57 PM

Is this what your looking for:

This was on the 72 C30 I tore down.

spencra · 11-28-2004, 09:12 PM

I'm not sure what they look like JIMs70GMC. I have two 67's and neither of them had one in it. The one that I need it for is a complete truck. I don't know why they would just take that out. I realized I was miising it when I topped of the radiator and the green stuff started flowing down my driveway. I thought that there was a hole in the radiator at first.

I've been to some bone yards but I can't seem to find one. Hell, I can barely find a 67-72 truck period.
Does anybody know if JIMs70GMC's overflow bottle is correct for a 67 c-20?

Thank you JIMs70GMC
And anyone else who could help.

teeitup · 11-28-2004, 09:14 PM

I've seen a few, they looked like that one Larry. I've seen them mounted in all different places.

spencra · 11-28-2004, 09:19 PM

Thanks Randy. I thought that it was mounted in a strange spot.
JIMs70GMC, How much were you looking to get for the Bottle with bracket and screws?

Thanks.

lamar · 11-28-2004, 09:54 PM

Try this link. http://cgi.ebay.com/ebaymotors/ws/eB...category=10076

Robert1970C20rstbukt · 11-28-2004, 10:22 PM

lamar, not to be rude but that's a windsheild washer bottle.

Longhorn Man · 11-28-2004, 11:06 PM

These trucks never came with an overflow bottle, which is why you can't locate one in the wrecking yards.
The one pictured there does look like the dealer installed bottle, but it also looks very much like the one i saw at auto zone too.

grayw0lf · 11-29-2004, 12:09 AM

The windshield wiper fluid bottle works great & looks original. I mounted mine to the inside of the passenger side fender, opposite the actual wiper fluid bottle. Looks good.

**Downtown** · 11-29-2004, 01:18 AM

Here is a pic of the one that was offered by GM. Dealer installed or Factory installed, I don't know. But if you want to be correct, then it should look like this one. If you don't need absolutely stock, I would go with the windshield washer bottle setup. The stock ones are kind of hard to find.

**JIMs70GMC** · 11-29-2004, 10:05 AM

You pay the shipping and you can have it. No lid on the bottle.

spencra · 11-29-2004, 10:17 AM

Sounds good to me. I'm sure that I will be able to dig up a cap somewhere. Don't forget the bracket (and screws if you have them).

My address is:

Larry C Spencer Jr.
135 Dunham Drive
Berlin, CT 06037

Let me know what shipping will be.
If you have paypal I could pay you that route.

Thanks alot JIMs70GMC,
Larry

Rod · 11-29-2004, 09:52 PM

http://207.44.196.117/vboard/showthr...light=overflow

that post has pic of original and one as close as I have seen them come. I had a close one, but sold it last week.

spencra · 11-29-2004, 11:13 PM

Man, how many different looking overflow bottles did they make?

It's maddening when you don't remember what they look like. I never really payed attention to something as insignificant as an overflow bottle. I wish that I did now.

*dtlilly* · 11-30-2004, 05:46 AM

Jim, the overflow bottle I found this summer on a 71-72 Blazer had one just like that and mounted in the same spot. I got lucky, it had the cap too

**JIMs70GMC** · 11-30-2004, 08:34 PM

Larry, I'll get it out to you tomorrow or Thursday, I'll let you know about the shipping cost.

spencra · 11-30-2004, 11:52 PM

Thanks Jim, I appreciate it.

Larry

11-28-2004, 02:15 PM	#1
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	WTB rad. overflow bottle and bracket. Does anybody have one of these? If so I would be interested. Thanks in advance. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

11-28-2004, 06:57 PM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Is this what your looking for: This was on the 72 C30 I tore down. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-28-2004, 09:12 PM	#3
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I'm not sure what they look like JIMs70GMC. I have two 67's and neither of them had one in it. The one that I need it for is a complete truck. I don't know why they would just take that out. I realized I was miising it when I topped of the radiator and the green stuff started flowing down my driveway. I thought that there was a hole in the radiator at first. I've been to some bone yards but I can't seem to find one. Hell, I can barely find a 67-72 truck period. Does anybody know if JIMs70GMC's overflow bottle is correct for a 67 c-20? Thank you JIMs70GMC And anyone else who could help. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

11-28-2004, 09:14 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I've seen a few, they looked like that one Larry. I've seen them mounted in all different places. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-28-2004, 09:19 PM	#5
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Thanks Randy. I thought that it was mounted in a strange spot. JIMs70GMC, How much were you looking to get for the Bottle with bracket and screws? Thanks. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course) Last edited by spencra; 11-29-2004 at 09:11 AM.

11-28-2004, 09:54 PM	#6
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	Try this link. http://cgi.ebay.com/ebaymotors/ws/eB...category=10076

11-28-2004, 10:22 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	lamar, not to be rude but that's a windsheild washer bottle. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

11-28-2004, 11:06 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	These trucks never came with an overflow bottle, which is why you can't locate one in the wrecking yards. The one pictured there does look like the dealer installed bottle, but it also looks very much like the one i saw at auto zone too.

11-29-2004, 12:09 AM	#9
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	The windshield wiper fluid bottle works great & looks original. I mounted mine to the inside of the passenger side fender, opposite the actual wiper fluid bottle. Looks good. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

11-29-2004, 01:18 AM	#10
Downtown Senior Member Join Date: Dec 1999 Location: New Palestine, IN Posts: 471	Here is a pic of the one that was offered by GM. Dealer installed or Factory installed, I don't know. But if you want to be correct, then it should look like this one. If you don't need absolutely stock, I would go with the windshield washer bottle setup. The stock ones are kind of hard to find. Attached Images __________________ 72 Super Cheyenne Longbed 350 49,000 original miles and My dad ordered it new 66 Chevy Caprice 2 dr 77 Caprice Estate Wagon New Palestine, IN

11-29-2004, 10:05 AM	#11
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	You pay the shipping and you can have it. No lid on the bottle. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-29-2004, 10:17 AM	#12
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Sounds good to me. I'm sure that I will be able to dig up a cap somewhere. Don't forget the bracket (and screws if you have them). My address is: Larry C Spencer Jr. 135 Dunham Drive Berlin, CT 06037 Let me know what shipping will be. If you have paypal I could pay you that route. Thanks alot JIMs70GMC, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

11-29-2004, 09:52 PM	#13
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	http://207.44.196.117/vboard/showthr...light=overflow that post has pic of original and one as close as I have seen them come. I had a close one, but sold it last week. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

11-29-2004, 11:13 PM	#14
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Man, how many different looking overflow bottles did they make? It's maddening when you don't remember what they look like. I never really payed attention to something as insignificant as an overflow bottle. I wish that I did now. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

11-30-2004, 05:46 AM	#15
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Jim, the overflow bottle I found this summer on a 71-72 Blazer had one just like that and mounted in the same spot. I got lucky, it had the cap too



Register or Log In To remove these advertisements.

11-30-2004, 08:34 PM	#16
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Larry, I'll get it out to you tomorrow or Thursday, I'll let you know about the shipping cost. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-30-2004, 11:52 PM	#17
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Thanks Jim, I appreciate it. Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

Register or Log In To remove these advertisements.