WTB: Cheyenne Super glovebox door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Shortbed · 11-24-2004, 10:04 PM

I need a glovebox door with the chrome edge that matches the instument panel. Chrome must be good. Woodgrain/emblem condition does not matter.

Longhorn Man · 11-25-2004, 12:32 PM

I don't think this was a factory option...only aftermarket.

cib101abn · 11-25-2004, 03:25 PM

I have a door with the super emblem that is like mint, dark green; but no woodgrain or chrome trim...came out of a 72 C20, OE label on backside in excellent cond.

MOTHERTRUCKERS · 11-25-2004, 08:04 PM

I have at least 6 from 71-2 cheyenne supers in my loft, i'll check them on Monday for aluminum edge damage.

Longhorn Man · 11-25-2004, 10:35 PM

so is it supposed to be aluminum or chrome?
The only ones I've seen with aluminum colored edging was 67 / 68 trucks.

teeitup · 11-25-2004, 10:46 PM

Some of the 71-72's cheyenne supers had a aluminum flat piece that mounts on the outside of the door and the woodgrain sticks on it.

71Shortbed · 11-25-2004, 10:55 PM

After reading all of your replies it appears that the chrome is not original. Heres a link to a chrome one at The Truck Shop.

http://www.thetruckshop.com/72%20Che...hite%20007.jpg

Probably what I need,to keep it near stock, is the aluminum trim. I can add it and a new decal to the door I have.

Thanks guys....

teeitup · 11-25-2004, 11:03 PM

The chrome around the edge isn't but the aluminum center is original

Harold Shepard · 11-25-2004, 11:25 PM

The door had an applique- GM not me- attached to the door it's self the outer edge of the door was body color- only the applique was aluminum w/ woodgrain- and only supers had this- matched the woodgrained bezel. The Super emblem attached to the door with three studs through the applique into the door it's self and there is a difference in the 71 emble and the 72 emblem. The chrome outer edge of the gbox door was a 67-68 thing- it did not continue through 69.

Dan72cst · 11-26-2004, 09:51 PM

Here's mine.....

71Shortbed · 11-26-2004, 10:13 PM

Thanks Dan, Thats the way I'm going to do mine. I just need to find a donor door so I can obtain the edge trim.

silvertonguedevil · 11-26-2004, 11:48 PM

My Cheyenne Super's is the same as the one pictured.

**PICKMUP** · 11-27-2004, 10:17 PM

You can buy that metal/alum face with the wood...new.

71Shortbed · 11-28-2004, 11:05 AM

Thanks Pickmup, I found it in an LMC catalog but it was the same price as the "plain" decal kit. I assumed that it was just cut a little smaller to fit inside the trim. I'm going to call them to be sure. Thanks for the tip.

71Shortbed · 11-28-2004, 01:41 PM

I called LMC and they are telling me the 3-piece Cheyenne Super decal kit includes the metal plate for the glovebox. Its the same price as the Cheyenne kit without the plate. 14.95 at LMC. Chevyduty sells just the glovebox door decal with plate for 39.95. Something doesn't smell right but I called LMC twice and they swear it comes with the plate... I'll find out when it shows up.

MOTHERTRUCKERS · 11-28-2004, 08:11 PM

If it comes with the aluminum trim also i'll order at least a 100 of them at that price.

71Shortbed · 12-01-2004, 11:21 AM

As I expected, It does not come with the plate. After several "discussions" with LMC they have agreed to refund my money and shipping and let me keep the decals. They admit that customer service is not "technical" and they have to request answers to part related questions and give the warehouse and technical staff time to respond.

11-24-2004, 10:04 PM	#1
71Shortbed Registered User Join Date: Jul 2004 Location: Lilburn, GA Posts: 209	WTB: Cheyenne Super glovebox door I need a glovebox door with the chrome edge that matches the instument panel. Chrome must be good. Woodgrain/emblem condition does not matter.

11-25-2004, 03:25 PM	#3
cib101abn Screaming Eagle Join Date: Oct 2004 Location: SW of Houston Posts: 288	I have a door with the super emblem that is like mint, dark green; but no woodgrain or chrome trim...came out of a 72 C20, OE label on backside in excellent cond. __________________ "Basic Research is what I am doing when I don't know what I am doing." Dr. Werner VonBraun (Rocket Scientist) Contributing Member 79 GMC SWB w/402 79 Chev SWB w400 sm blk being built remnants of 72 Cheyenne (selling)

11-25-2004, 08:04 PM	#4
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I have at least 6 from 71-2 cheyenne supers in my loft, i'll check them on Monday for aluminum edge damage. __________________ Rest in Peace Ed. Thanks for all the good times.

11-25-2004, 10:46 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Some of the 71-72's cheyenne supers had a aluminum flat piece that mounts on the outside of the door and the woodgrain sticks on it. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2004, 11:03 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	The chrome around the edge isn't but the aluminum center is original __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2004, 12:32 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I don't think this was a factory option...only aftermarket.

11-25-2004, 10:35 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	so is it supposed to be aluminum or chrome? The only ones I've seen with aluminum colored edging was 67 / 68 trucks.

11-25-2004, 10:55 PM	#7
71Shortbed Registered User Join Date: Jul 2004 Location: Lilburn, GA Posts: 209	After reading all of your replies it appears that the chrome is not original. Heres a link to a chrome one at The Truck Shop. http://www.thetruckshop.com/72%20Che...hite%20007.jpg Probably what I need,to keep it near stock, is the aluminum trim. I can add it and a new decal to the door I have. Thanks guys....

11-25-2004, 11:25 PM	#9
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	The door had an applique- GM not me- attached to the door it's self the outer edge of the door was body color- only the applique was aluminum w/ woodgrain- and only supers had this- matched the woodgrained bezel. The Super emblem attached to the door with three studs through the applique into the door it's self and there is a difference in the 71 emble and the 72 emblem. The chrome outer edge of the gbox door was a 67-68 thing- it did not continue through 69.

11-26-2004, 09:51 PM	#10
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Here's mine..... Attached Images __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400

11-26-2004, 10:13 PM	#11
71Shortbed Registered User Join Date: Jul 2004 Location: Lilburn, GA Posts: 209	Thanks Dan, Thats the way I'm going to do mine. I just need to find a donor door so I can obtain the edge trim.

11-26-2004, 11:48 PM	#12
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	My Cheyenne Super's is the same as the one pictured. __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

11-27-2004, 10:17 PM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	New available You can buy that metal/alum face with the wood...new. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

11-28-2004, 11:05 AM	#14
71Shortbed Registered User Join Date: Jul 2004 Location: Lilburn, GA Posts: 209	Thanks Pickmup, I found it in an LMC catalog but it was the same price as the "plain" decal kit. I assumed that it was just cut a little smaller to fit inside the trim. I'm going to call them to be sure. Thanks for the tip.

11-28-2004, 01:41 PM	#15
71Shortbed Registered User Join Date: Jul 2004 Location: Lilburn, GA Posts: 209	I called LMC and they are telling me the 3-piece Cheyenne Super decal kit includes the metal plate for the glovebox. Its the same price as the Cheyenne kit without the plate. 14.95 at LMC. Chevyduty sells just the glovebox door decal with plate for 39.95. Something doesn't smell right but I called LMC twice and they swear it comes with the plate... I'll find out when it shows up.



Register or Log In To remove these advertisements.

11-28-2004, 08:11 PM	#16
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	If it comes with the aluminum trim also i'll order at least a 100 of them at that price. __________________ Rest in Peace Ed. Thanks for all the good times.

12-01-2004, 11:21 AM	#17
71Shortbed Registered User Join Date: Jul 2004 Location: Lilburn, GA Posts: 209	As I expected, It does not come with the plate. After several "discussions" with LMC they have agreed to refund my money and shipping and let me keep the decals. They admit that customer service is not "technical" and they have to request answers to part related questions and give the warehouse and technical staff time to respond.

Register or Log In To remove these advertisements.