|
11-20-2004, 05:35 PM
|
#1 |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,906
|
WTB: spindle...
I am looking for a spindle, left or right doesnt matter. stock is fine. gouged is ok too, i just need straight. looking for cheap and preferrably local, i dont want to pay a load for shipping but wont turn down reasonable. I am not even going to use this spindle except for compare and contrast against a 81-87 spindle. I am wanting to see what modifications i may need to make a 88-98 lift spindle work on my 82. thanks....
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
|
|
|
11-26-2004, 02:37 AM
|
#2 |
|
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,400
|
uh oh... something tells me you're looking at lift spindles...
|
|
|
|
|
11-26-2004, 11:47 AM
|
#3 |
|
Registered User
Join Date: Oct 2002
Location: Cleveland, OH
Posts: 429
|
while i can't get you a spindle just yet, i can take a look at some basic things like height of spindle, distance from top and bottom balljoints in relation to the spindle centerline and tie-rod attachment point. i've got a 89 frame here and my 90 burb up in the air and it would be pretty easy to compare the two. a check of partsamerica.com may give you diameters for balljoint and tierod holes as well.
|
|
|
|
|
11-29-2004, 05:20 PM
|
#4 | ||
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,906
|
Quote:
  maybe.....Quote:
|
||
|
|
|
|
11-29-2004, 08:04 PM
|
#5 |
|
Registered User
Join Date: Oct 2002
Location: Cleveland, OH
Posts: 429
|
i'll actually have a spindle off this week. i was gonna keep a set for spares but forgot i have 2 rolling frames not one. one is rusty and getting cut up so i'll yoink a spindle off for you.
|
|
|
|
|
11-30-2004, 01:48 PM
|
#6 |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,906
|
how much $$ are we talkin? also, if you arent using the old ball joints could you throw them in as well? Last edited by Prerunner1982; 11-30-2004 at 01:56 PM. |
|
|
|
|
11-30-2004, 07:41 PM
|
#7 |
|
Registered User
Join Date: Oct 2002
Location: Cleveland, OH
Posts: 429
|
shipping and 5 bux to pay for gas to get my cadillac to ups and back
 how bout i cut the control arm off at the ball joint and everything. |
|
|
|
|
12-01-2004, 12:44 PM
|
#8 |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,906
|
sounds like a plan to me. let me know when its ready to go.....no real rush on it.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
