HELP can I replace a NP208 with a NP207 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gunny · 11-09-2004, 12:58 PM

I have a 88 GMC Suburban Diesel 4x4 with the 700r4 and NP208C transfer case, over a month ago the transfer case went belly up on me, purchased a replacement from another member of this group but greyhound (he shipped it through them) has lost it - was supposed to be here over 2 weeks ago

, the person doing the tracing of it told me today to go ahead and file a claim (which means I will never see it) because they can not locate it any where.

I have to have my burban up this week but the only t/c's locally that I can find within my budget are the 207's from the S-10 with the 700r4, so my questions are (keeping in mind that this is only a temp fix (until I rebuildand four wheel drive will not be engaged):

Will it fit?

will I have to do any mods to make it work?

will I have to replace the rear driveshaft (not worried about the front at this time)

Or if someone in Georgia has a 208 cheap give me a yell - while I enjoy driving my 65 T-Bird it is not done yet, and it uses twice the amount of fuel my burban does.

Thanks in advance.

Gunny

4bynut · 11-09-2004, 01:34 PM

Sorry don't know about the 207. If I was closer thou I have a 208 from behind a 700R4 out of a 1984 chevy 1/2 ton truck.It has around 120,000 on it and worked good when pulled. I'd sell it with adapter for $125. Thank's Jason.

clarkjw24 · 11-09-2004, 02:10 PM

I've got you a NP208 in SC. $100. Pm me if your interested.

Gunny · 11-09-2004, 05:23 PM

Quote:

Originally Posted by clarkjw24

I've got you a NP208 in SC. $100. Pm me if your interested.

Sent you a pm

Thanks

Gunny · 12-13-2004, 11:26 AM

Quote:

Originally Posted by clarkjw24

I've got you a NP208 in SC. $100. Pm me if your interested.

If any of you are looking for parts John is the man to see - got the transfer case from him a month ago and it works like a charm plus for an additional $10.00 he threw in the parts I need to fix my original

Thanks John

11-09-2004, 12:58 PM	#1
Gunny runnin on empty Join Date: Jun 2004 Location: Middle Georgia Posts: 115	HELP can I replace a NP208 with a NP207 I have a 88 GMC Suburban Diesel 4x4 with the 700r4 and NP208C transfer case, over a month ago the transfer case went belly up on me, purchased a replacement from another member of this group but greyhound (he shipped it through them) has lost it - was supposed to be here over 2 weeks ago , the person doing the tracing of it told me today to go ahead and file a claim (which means I will never see it) because they can not locate it any where. I have to have my burban up this week but the only t/c's locally that I can find within my budget are the 207's from the S-10 with the 700r4, so my questions are (keeping in mind that this is only a temp fix (until I rebuildand four wheel drive will not be engaged): Will it fit? will I have to do any mods to make it work? will I have to replace the rear driveshaft (not worried about the front at this time) Or if someone in Georgia has a 208 cheap give me a yell - while I enjoy driving my 65 T-Bird it is not done yet, and it uses twice the amount of fuel my burban does. Thanks in advance. Gunny __________________ 88 GMC Suburban - 6.2 Diesel 4x4 87 Jeep Cherokee - 6" lift, 32 bfg's, way too many mods to list. 65 Thunderbird - Stock United States Marine Corps SEPIUS EXERTUS, SEMPER FIDELIS, FRATER INFINITAS "Often Tested, Always Faithful, Brothers Forever" Last edited by Gunny; 11-09-2004 at 12:59 PM. Reason: missed a word

11-09-2004, 02:10 PM	#3
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	I've got you a NP208 in SC. $100. Pm me if your interested. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

11-09-2004, 01:34 PM	#2
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Sorry don't know about the 207. If I was closer thou I have a 208 from behind a 700R4 out of a 1984 chevy 1/2 ton truck.It has around 120,000 on it and worked good when pulled. I'd sell it with adapter for $125. Thank's Jason.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.