changing out a/c heater control pannel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Newt408 · 12-14-2004, 10:21 PM

What can I look forward to cussing about when I swap out the a/c heater control pannel? Does it control the heater with vaccume lines, cables or wires? Mine wont switch from the floor vents and when I pull the lever to off it makes a sucking sound until I wiggle it around.

KShortell · 12-15-2004, 01:22 PM

Changing out the heater control is pretty easy IF you also remove the radio. Of course, you do need to pull the dash bezel. There is a cable connection for the blend door control and a vacuum connection for the selector.

I changed mine out last year. It's no problem if you pull the radio to get better access.

Good luck!

12-14-2004, 10:21 PM	#1
Newt408 Registered User Join Date: Feb 2004 Location: west texas Posts: 71	changing out a/c heater control pannel What can I look forward to cussing about when I swap out the a/c heater control pannel? Does it control the heater with vaccume lines, cables or wires? Mine wont switch from the floor vents and when I pull the lever to off it makes a sucking sound until I wiggle it around. __________________ The way of a fool is right in his own eyes:but he that hearkeneth unto council is wise. Proverbs 12:15

12-15-2004, 01:22 PM	#2
KShortell Registered User Join Date: Oct 2003 Location: Chesapeake, VA Posts: 734	Changing out the heater control is pretty easy IF you also remove the radio. Of course, you do need to pull the dash bezel. There is a cable connection for the blend door control and a vacuum connection for the selector. I changed mine out last year. It's no problem if you pull the radio to get better access. Good luck! __________________ Semper Paratus



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.